A protocol for classifying ecologically relevant marine zones,a statistical approach

Mapping ecologically relevant zones in the marine environment has become increasingly important. Biological data are however often scarce and alternatives are being sought in optimal classifications of abiotic variables. The concept of ‘marine landscapes’ is based on a hierarchical classification of geological, hydrographic and other physical data. This approach is however subject to many assumptions and subjective decisions.     

Prototype measurements and small-scale model tests of wave overtopping at shallow rubble-mound breakwaters: the Ostia-Rome yacht harbour case

The paper presents the comparison between the results of small-scale model tests and prototype measurements of wave overtopping at a rubble-mound breakwater. The specific structure investigated is the west breakwater of the yacht harbour of Rome at Ostia (Italy) and is characterized by a gentle seaward slope (1/4) and by a long, shallow foreshore. The laboratory tests firstly aimed at carefully reproducing two measured storms in which overtopping occurred and was measured. The tests have been carried out in two independent laboratories, in a wave flume and in a wave basin, hence using a two-dimensional (2-D) and a three-dimensional (3-D) setup. In the 2-D laboratory tests no overtopping occurred during the storm reproductions; in the 3-D case discharges five to ten times smaller than those observed in prototype have been measured. This indicates the existence of model and scale effects. These effects have been discussed on the basis of the results of several parametric tests, which have been carried out in both laboratories, in addition to the storm reproductions, varying wave and water level characteristics. Final comparison of all the performed tests with 86 prototype measurements still suggests the existence of scale and model effects that induce strong underestimation of overtopping discharge at small scale. The scale reproduction of wave breaking on the foreshore, together with the 3-D features of the prototype conditions and the absence of wind stress in the laboratory measurements, have been individuated as the main sources of scale and model effects. The paper also provides a comparison between the data and a largely used formula for wave overtopping discharges in the presence of structures similar to the one at hand. The suitable value of a roughness factor that appears in that formula is investigated and good agreement is found with other recent researches on rubble-mound breakwaters.     

A need for incentivizing field hydrology,especially in an era of open data: discussion of “The role of experimental work in hydrological sciences – insights from a community survey”*

ABSTRACT

The sharing of data and collection of new data are both essential, but they are not inherently complementary. When data are openly available, researchers may be motivated to use those data rather than collect more because field work has costs and risks. The competitive advantage to those who do not put resources towards fieldwork may discourage field hydrology. Allocating efforts towards generating field data, which benefits hydrological sciences, is not necessarily best for individual hydrologists, especially in an era of open data. The objective of this work is to open a conversation on whether individuals’ best interests may contrast with the community’s desire for new observations. If the community wants new field observations, there is a need to consider the shifting balance of incentives and disincentives for pursuing field studies in hydrology.     

Metamorphic grade and gradient from white K-micas of Na-mica bearing sedimentary rocks in the Mosquito Creek Basin,East Pilbara Craton,Western Australia

Shales and phyllites from the turbidite sequences of the 2.9 Ga Mosquito Creek Formation of the East Pilbara, Western Australia contain varying amounts of paragonite and mixed Na–K micas (MNKMs), the 0 0 l X-ray diffraction reflections of which are unresolved from the 10-Å reflections, and only partly resolved from the 5-Å reflections of white K-mica (WKM). The Kübler index (‘crystallinity’), the full width at half maximum (FWHM) of the WKM, obtained from these composite reflections by applying a three-peak deconvolution procedure, reveals a metamorphic zoning of the Mosquito Creek Formation. The highest, “epimetamorphic”, grade occurs in the — largely Na-mica free — southern part, with lower, medium- to high-anchimetamorphic, grades in the central part, notably in a WSW-ENE anticlinal zone extending from Nullagine to the Blue Spec Mine. The Na-mica free metasediments of the Glen Herring Shale of the Fortescue Group, overlying the Mosquito Creek Formation to the W, show only a slightly lower metamorphic grade. The low b₀ lattice parameter of the WKMs indicates a very low metamorphic P/T gradient. The Na-mica bearing metasediments of the Mosquito Creek Formation correspond to a kaolinite-bearing protolith, strongly Al-enriched and K-depleted with respect to the presumably granitic-tonalitic source rock.     

A data assimilation approach to discharge estimation from space

River discharge is currently monitored by a diminishing network of gauges, which provide a spatially incomplete picture of global discharges. This study assimilated water level information derived from a fused satellite Synthetic Aperture Radar (SAR) image and digital terrain model (DTM) with simulations from a coupled hydrological and hydrodynamic model to estimate discharge in an un‐gauged basin scenario. Assimilating water level measurements led to a 79% reduction in ensemble discharge uncertainty over the coupled hydrological hydrodynamic model alone. Measurement bias was evident, but the method still provided a means of improving estimates of discharge for high flows. The study demonstrates the potential of currently available synthetic aperture radar imagery to reduce discharge uncertainty in un‐gauged basins when combined with model simulations in a data assimilation framework, where sufficient topographic data are available. The work is timely because in the near future the launch of satellite radar missions will lead to a significant increase in the volume of data available for space‐borne discharge estimation. Copyright © 2009 John Wiley & Sons, Ltd.     

Towards a volcanic–structural balance: relative importance of volcanism, folding, and remobilisation of nickel sulphides at the Perseverance Ni–Cu–(PGE) deposit, Western Australia

Perseverance is a world-class, komatiite-hosted nickel sulphide deposit situated in the well-endowed Leinster nickel camp of the Agnew–Wiluna greenstone belt, Western Australia. The mine stratigraphy at Perseverance trends north-northwest (NNW), dips steeply to the west, and is overturned. Stratigraphic footwall units lie along the western margin of the Perseverance Ultramafic Complex (PUC). The PUC comprises a basal nickel sulphide-bearing orthocumulate- to mesocumulate-textured komatiite that is overlain by a thicker, nickel sulphide-poor, dunite lens. Hanging wall rocks include rhyodacite that is texturally and compositionally similar to footwall volcanic rocks. These rocks separate the PUC from a second sequence of nickeliferous, E-facing, spinifex-textured komatiite units (i.e. the East Perseverance komatiite). Past workers argue for a conformable stratigraphic contact between the PUC and the East Perseverance komatiite and conclude that the PUC is extrusive. This study, however, clearly demonstrates that these komatiite sequences are discordant, implying that the PUC may have intruded rhyodacite country rock as a sill with subsequent structural juxtaposition against the East Perseverance komatiite. Early N–S shortening associated with the regional D_I deformation event (corresponding to the local D_P1 to D_P3 events at Perseverance) resulted in the heterogeneous partitioning of strain along the margins of the competent dunite. A mylonite developed in the more ductile footwall rocks along the footwall margin of the PUC, while isoclinal F₃ folds, such as the Hanging wall limb and Felsic Nose folds, formed in low-mean stress domains along the fringes of the elongated dunite lens. Strata-bound massive and disseminated nickel sulphides were passively fold thickened in hinge areas of isoclinal folds, whereas basal massive sulphides lubricated fold limbs and promoted thrust movement along shallowly dipping lithological contacts. Massive sulphides were physically remobilised up to 20 m from their primary footwall position into deposit-scale fold hinges to form the 1A and Felsic Nose orebodies. First-order controls on the geometry of the Perseverance deposit include the thermomechanical erosion of footwall rocks and the channelling of the mineralised komatiitic magma. Second- or third-order controls are several postvolcanic deformation events, which resulted in the progressive folding and shearing of the footwall contact, as well as the passive fold thickening of massive and disseminated sulphide orebodies. Massive sulphides were physically remobilised into multiple generations of fold hinges and shear zones. Important implications for near-mine exploration in the Leinster camp include identifying nickeliferous komatiite units, defining their three-dimensional geometry, and targeting fold hinge areas. Fold plunge directions and stretching lineations are indicators of potential plunge directions of massive sulphide orebodies.     

In situ U–Pb SIMS (IN-SIMS) micro-baddeleyite dating of mafic rocks: Method with examples

An in situ U–Pb SIMS (IN-SIMS) method to date micro-baddeleyite crystals as small as 3 μm is presented with results from three samples that span a variety of ages and geologic settings. The method complements ID-TIMS geochronology by extending the range of dateable crystals to sizes smaller than can be recovered by physical separation. X-ray mapping and BSE imaging are used to locate target grains in thin section, followed by SIMS analysis on a CAMECA ims 1270, using the field aperture in the transfer column to screen out ions from host phases. Internal age precisions for the method are anticipated to range from 0.1% for Precambrian rocks to 3–7% for Phanerozoic rocks. Results establish a 2689 ± 5 Ma age for mafic dikes in the Wyoming craton, USA, a 1540 ± 30 Ma age for a subaerial lava flow from the Thelon Basin of northern Canada, and a 457 ± 34 Ma age for mafic dikes in the platform sequence of southeastern Siberia. The method is ideal for relatively non-destructive dating of small samples such as extraterrestrial rocks and precious terrestrial samples.     

Impact of climate change and urban development on extreme flows in the Grote Nete watershed,Belgium

This study investigates how extreme flows in the Grote Nete watershed located in the Flanders region of Belgium will respond to climate change and urban growth using the hydrological model WetSpa. Three climate change scenarios (low, mean and high), three urban development scenarios (low, medium and high) and the nine combined climate–urban change scenarios are considered. The results indicate that extreme low flows would decrease noticeably by climate change, while they would be less sensitive to urban development. On the other hand, extreme peak flows are predicted to increase considerably due to both climate change and urban growth. It is concluded that coupling the effects of land use change with climate change may lead to severe increase in the frequency river floods in winter as well as the frequency of extreme river low flows in summer.     

Evaporation estimates from Nasser Lake, Egypt, based on three floating station data and Bowen ratio energy budget

Nasser Lake is located in a hyper-arid region in the south of Egypt. Evaporation is by far the most important factor in explaining the water losses from the lake. To obtain better management scenarios for Nasser Lake, an accurate estimation of the lake evaporation losses thus is essential. This paper presents an update of previous evaporation estimates, making use of local meteorological and hydrological data collected from instrumented platforms (floating weather stations) at three locations on the lake: at Raft, Allaqi, and Abusembel (respectively at 2, 75, and 280 km upstream of the Aswan High Dam). Results from six conventional evaporation quantification methods were compared with the values obtained by the Bowen ratio energy budget method (BREB). The results of the BREB method showed that there is no significant difference between the evaporation rates at Allaqi and Abusembel. At Raft, higher evaporation rates were obtained, which were assumed to be overestimated due to the high uncertainty of the Bowen ratio (BR) parameter. The average BR value at Allaqi and Abusembel was used to eliminate this overestimates evaporation. Variance-based sensitivity and uncertainty analyses on the BREB results were conducted based on quasi-Monte Carlo sequences (Latin Hypercube sampling). The standard deviation of the total uncertainty on the BREB evaporation rate was found to be 0.62 mm day^?1. The parameter controlling the change in stored energy, followed by the BR parameter, was found to be the most sensitive parameters. Several of the six conventional methods showed substantial bias when compared with the BREB method. These were modified to eliminate the bias. When compared to the BREB-based values, the Penman method showed most favorably for the daily time scale, while for the monthly scale, the Priestley–Taylor and the deBruin–Keijman methods showed best agreement. Differences in mean evaporation estimates of these methods (against the BREB method) were found to be in the range 0.14 and 0.36 mm day^?1. All estimates were based calculations at the daily time scale covering a 10-year period (1995–2004).