Zur Tektonik im westlichen Fichtelgebirge

Zusammenfassung Es wird zu einigen tektonischen Problemen im westlichen Fichtelgebirge (Gradabteilungsblätter Weidenberg und Ebnath) Stellung genommen, wobei andere Deutungsmöglichkeiten zur Diskussion gestellt werden. Vor allem wird eine schichtparallele Verschieferung einer älteren Schiefrigkeit abgelehnt und das Umlaufen der Schieferung am SW-Rand des Fichtelgebirges durch sekundäre Kippungen erklärt.

---

The author expresses his opinion on some tectonic problems in the western Fichtelgebirge (Topographical maps: Gradabteilungsblätter Weidenberg und Ebnath).He proposes different ways of interpretation. Above all he rejects that an older schistosity became again foliated parallel to the strata, and he ascribes the bending of the schistosity on the south-west border of the Fichtelgebirge to secundary tilts.

---

Résumé L'auteur critique quelques problèmes tectoniques qui se posent à l'ouest du Fichtelgebirge. (Tebles topographiques: Gradabteilungsblätter Weidenberg und Ebnath). Il indique d'autres interprétations possibles. Avant tout il réfute qu'une ancienne schistosité au sud-ouest du Fichtelgebirge est attribuée à un basculement secondaire.

---

Fichtelgebirge. .

     

Reduction of inorganic compounds in autoclaves by using suspended cellulose

Autoclaves are closed vessels in which liquids can be heated above their ‘normal' boiling points. As a consequence the pressure will rise. This equipment has permitted a variety of processes like the syntheses of organics and the leaching of metal ores. Pressure technologies can be used for accelerating reactions, for specific syntheses or they offer an environmental or economical alternative for existing processes. Wet pressure oxidation of sewage sludge, an organic waste product, has become a proven technology. If less oxygen is added than stoichiometrically required for a complete oxidation, cellulose will break down by a different reaction mechanism, releasing electrons. Under these circumstances reduction of inorganic compounds is possible.     

Geochemically induced shifts in catabolic energy yields explain past ecological changes of diffuse vents in the East Pacific Rise 9°50'N area

The East Pacific Rise (EPR) at 9°50'N hosts a hydrothermal vent field (Bio9) where the change in fluid chemistry is believed to have caused the demise of a tubeworm colony. We test this hypothesis and expand on it by providing a thermodynamic perspective in calculating free energies for a range of catabolic reactions from published compositional data. The energy calculations show that there was excess H₂S in the fluids and that oxygen was the limiting reactant from 1991 to 1997. Energy levels are generally high, although they declined in that time span. In 1997, sulfide availability decreased substantially and H₂S was the limiting reactant. Energy availability dropped by a factor of 10 to 20 from what it had been between 1991 and 1995. The perishing of the tubeworm colonies began in 1995 and coincided with the timing of energy decrease for sulfide oxidizers. In the same time interval, energy availability for iron oxidizers increased by a factor of 6 to 8, and, in 1997, there was 25 times more energy per transferred electron in iron oxidation than in sulfide oxidation. This change coincides with a massive spread of red staining (putative colonization by Fe-oxidizing bacteria) between 1995 and 1997. For a different cluster of vents from the EPR 9°50'N area (Tube Worm Pillar), thermodynamic modeling is used to examine changes in subseafloor catabolic metabolism between 1992 and 2000. These reactions are deduced from deviations in diffuse fluid compositions from conservative behavior of redox-sensitive species. We show that hydrogen is significantly reduced relative to values expected from conservative mixing. While H₂ concentrations of the hydrothermal endmember fluids were constant between 1992 and 1995, the affinities for hydrogenotrophic reactions in the diffuse fluids decreased by a factor of 15 and then remained constant between 1995 and 2000. Previously, these fluids have been shown to support subseafloor methanogenesis. Our calculation results corroborate these findings and indicate that the 1992-1995 period was one of active growth of hydrogenotrophic communities, while the system was more or less at steady state between 1995 and 2000.     

Water release patterns of heated speleothem calcite and hydrogen isotope composition of fluid inclusions

Speleothem fluid inclusions are a potential paleo-precipitation proxy to reconstruct past rainwater isotopic composition (δ¹⁸O, δD). To get a better insight in the extraction of inclusion water from heated speleothem calcite, we monitored the water released from crushed and uncrushed speleothem calcite, heated to 900 °C at a rate of 300 °C/h, with a quadrupole mass spectrometer. Crushed calcite released water in three not well individualised peaks between 25 and 360 °C, 360 and 650 °C and between 650 and 800 °C while uncrushed calcite released water in two distinct temperature intervals: between 25 and 550 °C and between 550 and 900 °C.Water from two speleothems from the Han-sur-Lesse cave was recovered using three different techniques: i) the crushing and heating to 360 °C technique, ii) the decrepitation by heating to 550 °C and iii) the decomposition by heating to 900 °C technique. Measurements of the δD of water recovered by the decomposition of Han-sur-Lesse calcite heated to 900 °C did not show a 20 to 30‰ offset as found by previous authors. However a difference of 7‰ was observed between water released before and after decomposition of the calcite. Water recovery from the Han-sur-Lesse samples suggests that a simple heating technique (up to 550 °C) without crushing could both (a) recover water with δD representative of that of the drip water and (b) double the water yield as compared to the crushing and heating method.Our study warns for possible contamination of the recovered inclusion water with hydration water of lime, responsible for the recovery of water with very negative δD values.     

Iron-hydroxide clogging of public supply wells receiving artificial recharge: near-well and in-well hydrological and hydrochemical observations

Clogging of water wells by iron-hydroxide incrustations due to mixing of anoxic and oxic groundwater is a common well-ageing problem. The relation between well operation (on and off), the spatial and temporal variations in hydrochemistry outside and inside a supply well, and the distribution of clogging iron-hydroxides were studied in an artificial recharge well field in the Netherlands. Camera inspection, high-resolution multi-level water sampling outside the well and detailed in-well pH/EC/O₂ profiles revealed remarkable patterns. During pumping, the top of the upper well screen abstracted oxic filtrate, although the larger part of the in-well water column was anoxic. The column rapidly turned oxic after shutdown due to a downward short-circuiting of oxic water via the well. Within 15 d it became anoxic due to the slow advance of anoxic lake filtrate created by local changes in flow direction as the neighboring wells continued to pump. Severe clogging occurred where the oxic filtrate entered the well, while half-clogging of the upper well screen occurred due to less inflow of oxic filtrate on the lake side. Transport of iron flocs and bacterial slimes after shutdown seemed to clog the lower part of the well screen. Frequent on/off switching should be avoided in iron-clogged wells.     

Fluid inclusion and cathodoluminescence studies on fluorite from the Kerio valley, Kenya

The Kerio valley lies between the Elgeyo escarpment and the Tugen hills which mark the western margin of the Kenya rift valley. The main fluorite deposits are located in the southern part of the valley at Kimwarer, Choff and Kamnaon.Three types of inclusion fillings were identified: Liquid+Vapour, Liquid+Daughter Minerals and Liquid. The L+V type is dominant. Inclusions occur as clusters, trails along the crystal growth zones and as isolated ones. Low salinities, apparently lower than the 5% wt. NaCl equivalent, were established. Homogenization temperatures suggest that fluorite mineralization took place at different stages and at temperatures between 120 and 180 °C. Isolated readings above 180°C may be referring to the original inclusions in limestone. These measurements and the absence of CO₂ in the inclusions, as well as the occurrence of vugs and crustifications with fluorite, suggest that mineralization took place at relatively shallow depths.Emission spectrum lines representing Eu²⁺, Dy³⁺, Tb³⁺ and Sm³⁺ in fluorite were identified. Sm³⁺ was detected only in the pinkish luminescence of veined fluorite, whereas the pinkish zone in banded fluorite contains Tb³⁺. Eu²⁺ which gives the strongest emission lines in the blue part of the visible spectrum, apparently is responsible for the strong blue cathodoluminescence (CL) in fluorite. The dominance of Eu²⁺ peaks further points to the fact that fluorite mineralization in the Kerio valley took place in an environment that was enriched in Lanthanide Rare Earth Elements (LREE). The presence of rare earths and radioactive elements in fluorite points towards their enrichment in the environment of fluorite mineralization. A juvenile origin of mineral forming solutions is proposed.Two generations of fluorite were established: allotriomorphic fluorite, forming the matrix, and the idiomorphic variety, occurring either in barite or in druzes in early fluorite. Barite in turn forms idiomorphic crystals in allotriomorphic fluorite. Relics of calcite occur in both K-feldspars and in early fluorite. Oxides and hydroxides of Fe, Mn, Ti and Al commonly occur in open spaces in fluorite. Of significance is the presence of gold in fluorite. Fluorite mineralization is of hydrothermal origin in the post-Miocene era and was formed as a result of metasomatic replacement of marble and open space fillings.     

Geochemical and electron paramagnetic characteristics of quartz from a multi-stage vein environment, Cowarra gold deposit, New South Wales

The characterisation of quartz using trace element geochemistry and electron paramagnetic resonance measurements has been tested for different generations of quartz veining in the multi-stage hydrothermal vein system at Cowarra. Quartz closely associated with gold mineralisation can be distinguished from earlier and later quartz generations in the mineralised environment, and both types can be distinguished from regional, barren quartz veins. These separate stages of quartz veins are also recognised from their fluid inclusion characteristics. Geochemical differences in the quartz partly reflect the presence of minor mineral inclusions, particularly sulfides and arsenopyrite.The study highlights the importance of understanding the paragenetic sequence of quartz vein development in a mineralised environment and the need for careful, thorough sampling before attempting geochemical and EPR characterisation of quartz as an exploration technique.     

Correlation of the Quaternary terrace sequence in the Lower Rhine valley and northern Alpine foothills of central Europe

Thirteen glacial terraces are known from the western part of the northern Alpine foothills between the Lech and Iller Rivers. In the Lower Rhine region of West Germany, a similar number of terraces are capped by interglacial floodloams and soils. Whereas the environment during individual interglaciations did not differ substantially, the glaciations were progressively more severe. The Main Terrace system of the Rhine may be an exception. The duration of the Quaternary, starting at the base of Praetiglian, is estimated at approximately 2 million yr by paleomagnetic dating. The major cold-warm climatic cycles of the earliest Pleistocene lasted approximately 100,000 yr, the same as those of the Brunhes Chron. The intervening Main Terrace system has not yet been climatically subdivided. Correlation with the Netherlands is possible because of an abundance of paleobotanic and paleomagnetic evidence. In the Alpine foothills, stratigraphically useful indicators of warm climates are missing, but analogies in terrace development permit comparison with the Lower Rhine and Danube. The terrace sequence in the Alpine foothills is incomplete, as are those along most of the other rivers in Europe. Some of the older terraces may have been eroded.     

In situ N and C labelling of indigenous and plantation tree species in a tropical mountain forest (Munessa, Ethiopia) for subsequent litter and soil organic matter turnover studies

We propose a novel pragmatic approach of in situ ¹⁵N and ¹³C isotope labelling of trees for subsequent litter decomposition and turnover studies under field conditions. Using this method the labelling of even large trees under natural conditions is possible and compared to tree labelling under artificial conditions in greenhouses the in situ approach is less expensive. ¹³C and ¹⁵N labelling were carried out simultaneously via photosynthesis by tree gassing with ¹³CO₂ and by stem injection of ¹⁵NH₄¹⁵NO₃. The aims of this study were: (i) to produce a sufficient quantity of labelled plant material for subsequent field incubation studies and (ii) to investigate the effectiveness and distribution of in situ ¹⁵N (¹⁵NH₄¹⁵NO₃) and ¹³C (¹³CO₂) labelling of Podocarpus falcatus, Croton macrostachys, Prunus africana and Cupressus lusitanica. The following targets need to be achieved: (i) Assuming almost natural litter fall conditions, enough labelled plant material must be produced in situ for the turnover experiment; (ii) intra-plant tracer enrichment shall be homogeneous; (iii) tracer enrichment should be comparable for different tree species; and (iv) tracer enrichment must be sufficient for subsequent litter turnover studies using the stable isotope approach. Our results clearly demonstrated that several kilograms of labelled plant material can be produced in situ. For many ecosystems, this amount is sufficient for a long term litter turnover experiment on a field scale under almost natural litter fall conditions. However, intra-plant label uptake of ¹³C and ¹⁵N was heterogeneous so that only leaves (litter) should be used for the turnover study. It could be shown that only a part of the labile C and N fraction in the leaves was labelled. Nevertheless, label uptake was sufficient for subsequent litter turnover studies.     

A cross-border regional earthquake early warning system: PRESTo@CE3RN

Since 2002 the Istituto Nazionale di Oceanografia e di Geofisica Sperimentale (OGS) in Udine (Italy), the Agencija Republike Slovenije za Okolje (ARSO) in Ljubljana (Slovenia) and the Zentralanstalt für Meteorologie und Geodynamik (ZAMG) in Vienna (Austria), are collecting, analyzing, archiving and exchanging seismic data in real time, initially in the framework of the EU Interreg IIIa Italia-Austria project “Trans-national seismological networks in the South-Eastern Alps”. As outcome of the successful cooperation, in the 2013 OGS, ARSO and ZAMG decided to officially merge their seismic monitoring efforts into the “Central and Eastern European Earthquake Research Network—CE³RN”. This work reports the results of a nine-month real-time test of the earthquake early warning (EEW) algorithm probabilistic and evolutionary early warning system carried out at the CE³RN. The study allowed identifying the actions to be implemented in order to let the CE³RN become in the next future an efficient cross-border EEW system.