Estimating regional-scale permeability–depth relations in a fractured-rock terrain using groundwater-flow model calibration

The trend of decreasing permeability with depth was estimated in the fractured-rock terrain of the upper Potomac River basin in the eastern USA using model calibration on 200 water-level observations in wells and 12 base-flow observations in subwatersheds. Results indicate that permeability at the 1–10 km scale (for groundwater flowpaths) decreases by several orders of magnitude within the top 100 m of land surface. This depth range represents the transition from the weathered, fractured regolith into unweathered bedrock. This rate of decline is substantially greater than has been observed by previous investigators that have plotted in situ wellbore measurements versus depth. The difference is that regional water levels give information on kilometer-scale connectivity of the regolith and adjacent fracture networks, whereas in situ measurements give information on near-hole fractures and fracture networks. The approach taken was to calibrate model layer-to-layer ratios of hydraulic conductivity (LLKs) for each major rock type. Most rock types gave optimal LLK values of 40–60, where each layer was twice a thick as the one overlying it. Previous estimates of permeability with depth from deeper data showed less of a decline at <300 m than the regional modeling results. There was less certainty in the modeling results deeper than 200 m and for certain rock types where fewer water-level observations were available. The results have implications for improved understanding of watershed-scale groundwater flow and transport, such as for the timing of the migration of pollutants from the water table to streams.     

All-cis hentriaconta-9,15,22-triene in microbial mats formed by the phototrophic prokaryote Chloroflexus.

All-cis hentriaconta-9,15,22-triene (I) has been isolated from Chloroflexus mats, Yellowstone National Park (USA), and identified by GC-(HR)MS analysis of I and its hydrogenated and DMDS-derivatized products and by 1H and 13C NMR spectroscopy.     

Chemical composition of macerals in bituminous coals of the Gunnedah Basin, Australia, using electron microprobe analysis techniques

The chemical composition of the organic matter in the principal macerals of high-volatile bituminous coals from the Gunnedah Basin, New South Wales (Rv_max of telocollinite between 0.6 and 1.1%) has been evaluated from polished section specimens using an electron microprobe technique. Highest proportions of carbon occur in the inertinite macerals, especially fusinite and secretinite (formerly resino-sclerotinite), as well as in sporinite; lowest proportions of carbon occur in the different macerals of the vitrinite group. Oxygen shows the reverse trend, being most abundant in vitrinite and least abundant in the inertinite components, whereas sulphur is lowest in the inertinites and highest in the liptinite (mainly sporinite) present. Evaluations of maceral composition, using the carbon content of telocollinite as a rank indicator, show that carbon is more abundant in both sporinite and semifusinite, relative to vitrinite, in low-rank high-volatile bituminous coals. The difference decreases with increasing rank, and the proportion of carbon in telocollinite becomes essentially the same as that in sporinite and semifusinite at carbon contents of about 89 and 91%, respectively. The carbon content of fusinite and secretinite, on the other hand, does not seem to vary appreciably with rank advance. No significant difference in composition occurs in the rank range studied between the three vitrinite varieties present, desmocollinite, telocollinite and a more highly reflecting telocollinite resembling pseudovitrinite. No evidence was found to indicate a higher hydrogen content, relative to telocollinite, for the vitrinite matrix of desmocollinite.     

All-cis hentriaconta-9,15,22-triene in microbial mats formed by the phototrophic prokaryote Chloroflexus

All-cis hentriaconta-9,15,22-triene (I) has been isolated from Chloroflexus mats, Yellowstone National Park (USA), and identified by GC–(HR)MS analysis of I and its hydrogenated and DMDS-derivatized products and by ¹H and ¹³C NMR spectroscopy.     

Monitoring Growth in Rapidly Urbanizing Areas Using Remotely Sensed Data

Urbanization and the ability to manage for a sustainable future present numerous challenges for geographers and planners in metropolitan regions. Remotely sensed data are inherently suited to provide information on urban land cover characteristics, and their change over time, at various spatial and temporal scales. Data models for establishing the range of urban land cover types and their biophysical composition (vegetation, soil, and impervious surfaces) are integrated to provide a hierarchical approach to classifying land cover within urban environments. These data also provide an essential component for current simulation models of urban growth patterns, as both calibration and validation data. The first stages of the approach have been applied to examine urban growth between 1988 and 1995 for a rapidly developing area in southeast Queensland, Australia. Landsat Thematic Mapper image data provided accurate (83% adjusted overall accuracy) classification of broad land cover types and their change over time. The combination of commonly available remotely sensed data, image processing methods, and emerging urban growth models highlights an important application for current and next generation moderate spatial resolution image data in studies of urban environments.     

Impacts of unconstrained effort: Lessons from a rock lobster (Jasus edwardsii) fishery decline in the northern zone management region of South Australia

The Northern Zone rock lobster fishery of South Australia is expansive, covering an area of ∼207,000 km². From 1970 to 2002 it was managed under input controls that relied heavily on restrictions to days-at-sea and size limits. In 2003, output controls in the form of individual transferable quotas with a total allowable commercial catch were also introduced. Fishery performance from 1980 to 2007 was analysed based on catch data and model outputs. Trends in catch and effort increased through the 1980s and 1990s while nominal catch rate remained relatively stable. However, from 1999 to 2003 catch decreased by 49% from 1001 to 503 ton and has remained at <500 ton since. Importantly, nominal effort did not decline comparatively, decreasing by only 12% from 1999 to 2007. Consequently, nominal catch rate decreased by 47.5% from 1.43 to 0.75 kg/potlift, over the same period. Logbook data revealed strong evidence of spatial expansion through the 1980s and 1990s which is likely to have masked declining lobster abundance and contributed to a “hyperstability” scenario in catch rates. It is suggested that increasing effective effort, driven by advances in fishing technology and vessel design, fuelled this expansion. Model outputs, which account for increases in effective effort, indicate that biomass has decreased by ∼68% since the 1980s. The results highlight the limitations associated with input controls in controlling effort during periods of spatial expansion. Further evidence from puerulus settlement data stresses the importance of conservative quotas for lobster fisheries where annual recruitment is low or highly sporadic.     

Monosulfidic black ooze accumulations in sediments of the Geographe Bay area, Western Australia

Mobilisation of sedimentary monosulfidic black ooze (MBO) may result in rapid deoxygenation and acidification of surface waters, and release of potentially toxic metals. This study examines the extent and nature of MBO accumulation in the Geographe Bay area, Western Australia. MBO accumulations were found to be widespread in benthic sediments of the Geographe Bay area with acid-volatile sulfide (AVS) contents as high as 320 μmol g⁻¹. The MBO materials often had unusually high dissolved sulfide (S^−II) concentrations in their pore-waters (up to 610 mg L⁻¹) and elevated elemental sulfur (S⁰) contents (up to 51 μmol g⁻¹). Dissolved S^−II is able to accumulate due to limited iron availability and S⁰ is largely its partial oxidation product. The availability of organic carbon and Fe limited MBO accumulation at many sites. A comparison of AVS and simultaneously extracted metal (SEM) concentrations has shown that metals are likely to be bound in sulfide complexes.