Cause of winter gravity wave spectrum saturation

Gravity waves play a significant role in establishing the large-scale circulation and structure of the middle atmosphere. Through gravity wave saturation proc-esses, such motions are believed to cause turbulence, resulting in divergence of momentum flux and the diffusion of heat and constituents in the meso-sphere[1,2]. The mechanisms that contribute signifi-cantly to the gravity wave saturation are thought to be the dynamical and convective instabilities[3]. However, it is difficult to distin…     

Source time-function as discriminant using empirical Green’s function

Since the sign up of CTBT (Comprehensive Test Ban Treaty), the nuclear monitoring and distinguishing has gained great attention by the treaty countries. Seismology is one of the primary technical means available for monitoring compliance to a CTBT. However, there does not exist a single criterion, so far, that can effectively distinguish explorations from earthquakes. It has been known that source time function (abbreviated to STF) of an underground nuclear explosion contains important p…     

A study on the focal parameters of Shidian M =5.9 earthquake sequences in 2001

On the basis of about 300 earthquake wave forms observed in the Shidian M _S=5.9 sequences on April 12, 2001 recorded in Kunming Digital Seismic Network, the spectra of shear wave have been used to estimate the focal parameters of these earthquake sequences. The results show that within the magnitude range of 1.5–5.3, the seismic moments are 10¹⁰–10¹⁶ N·m, the corner frequencies are 0.2–0.8 Hz, radii of the focal rupture are 200–2 500 m and the stress drops are 0.1×10⁵–20×10⁵Pa. Through the statistical analyses of variation of corner frequency f _c and stress drop Δσ with time, it is discovered that the average corner frequency of the foreshock sequences is obviously lower than that of the aftershock sequences. Contrarily, the average stress drops Δσ of the foreshock sequences are clearly higher than that of the aftershocks. It is considered that these variation characteristics of average corner frequency and stress drops before and after the main shock have index significance to the precursory information before a strong earthquake. The higher stress drops for the foreshock sequences show that the higher shear stresses have been stored in the area of main shock. After the main shock, most of the stresses have been released, so the aftershock sequences show a rupture process of lower stresses. Foundation item: Scientific and Technological Key Project of Yunnan Province (2001NG46)     

2-D crustal Poisson’s ratio from seismic travel time inversion in Changbaishan Tianchi volcanic region

Based on the inversion method of 2D velocity structure and interface, the crustal velocity structures of P-wave and S-wave along the profile L ₁ are determined simultaneously with deep seismic sounding data in Changbaishan Tianchi volcanic region, and then its Poisson’s ratio is obtained. Calculated results show that this technique overcomes some defects of traditional forward calculation method, and it is also very effective to determine Poisson’s ratio distribution of deep seismic sounding profile, especially useful for study on volcanic magma and crustal fault zone. Study result indicates that there is an abnormally high Poisson’s ratio body that is about 30 km wide and 12 km high in the low velocity region under Tianchi crater. Its value of Poisson’s ratio is 8% higher than that of surrounding medium and it should be the magma chamber formed from melted rock with high temperature. There is a high Poisson’s ratio zone ranging from magma chamber to the top of crust, which may be the uprise passage of hot substance. The lower part with high Poisson’s ratio, which stretches downward to Moho, is possibly the extrusion way of hot substance from the uppermost mantle. The conclusions above are consistent with the study results of both tomographic determination of 3D crustal structure and magnetotelluric survey in this region. Foundation item: Key Project from China Earthquake Administration and the Project (95-11-02-01) from Ministry of Science and Technology (2001DIA10003). Contribution No. RCEG200401, Geophysical Exploration Center, China Earthquake Administration.     

Study of statistically correcting model CMAQ-MOS for forecasting regional air quality

Based on analysis of the air pollution observational data at 8 observation sites in Beijing including outer suburbs during the period from September 2004 to March 2005, this paper reveals synchronal and in-phase characteristics in the spatial and temporal variation of air pollutants on a city-proper scale at deferent sites; describes seasonal differences of the pollutant emission influence between the heating and non-heating periods, also significantly local differences of the pollutant emission influence between the urban district and outer suburbs, i.e. the spatial and temporal distribution of air pollutant is closely related with that of the pollutant emission intensity. This study shows that due to complexity of the spatial and temporal distribution of pollution emission sources, the new generation Community Multi-scale Air Quality (CMAQ) model developed by the EPA of USA produced forecasts, as other models did, with a systematic error of significantly lower than observations, albeit the model has better capability than previous models had in predicting the spatial distribution and variation tendency of multi-sort pollutants. The reason might be that the CMAQ adopts average amount of pollutant emission inventory, so that the model is difficult to objectively and finely describe the distribution and variation of pollution emission sources intensity on different spatial and temporal scales in the areas, in which the pollution is to be forecast. In order to correct the systematic prediction error resulting from the average pollutant emission inventory in CMAQ, this study proposes a new way of combining dynamics and statistics and establishes a statistically correcting model CMAQ-MOS for forecasts of regional air quality by utilizing the relationship of CMAQ outputs with corresponding observations, and tests the forecast capability. The investigation of experiments presents that CMAQ-MOS reduces the systematic errors of CMAQ because of the uncertainty of pollution emission inventory and improves the forecast level of air quality. Also this work employed a way of combining point and area forecasting, i.e. taking the products of CMAQ for a center site to forecast air pollution for other sites in vicinity with the scheme of model products "reanalysis" and average over the "area".     

Chemical forms of heavy metal contaminants in sediments of Miyun reservoir

The chemical forms, spatial distribution and sources of As, Hg, Cd, Pb and Zn in sediments of the Miyun reservoir were studied. The results of sequential extraction demonstrate that most of As, Pb and Zn were bound to the residual fraction, Hg was associated with the sulfide fraction while Cd was associated with the carbonate fraction and the residual fraction. On the vertical profiles the concentrations of the heavy metals in total and each fractions mostly decreased with increasing depths in sediments, suggesting that the heavy metals input from the upstream watershed increases yearly. Summation of the residual fraction, the sulfide fraction and the carbonate fraction accounts for 60.03%―85.60% of the total heavy metal contents in the sediments, which represent the geochemical background values of the elements and relate closely to soil erosion. Results of the main factor analysis show that most sediments of the reservoir come from the upstream soil erosion, the point source pollution and domestic waste. Moreover, the microbial activities taking place on the sediment-water interface are also one of the major factors to cause the increasing content of the organic matter fraction and the iron-manganese oxide fraction. Environmental change of the reservoir water could make the removability of the heavy metals increase, leading to the increase of their concentrations in pore water in sediments, and imperiling water quality of the reservoir.     

Viscosity of peridotite liquid up to 13 GPa: Implications for magma ocean viscosities

The viscosity of synthetic peridotite liquid has been investigated at high pressures using in-situ falling sphere viscometry by combining a multi-anvil technique with synchrotron radiation. We used a newly designed capsule containing a small recessed reservoir outside of the hot spot of the heater, in which a viscosity marker sphere is embedded in a forsterite + enstatite mixture having a higher solidus temperature than the peridotite. This experimental setup prevents spheres from falling before a stable temperature above the liquidus is established and thus avoids difficulties in evaluating viscosities from velocities of spheres falling through a partially molten sample.

Experiments have been performed between 2.8 and 13 GPa at temperatures ranging from 2043 to 2523 K. Measured viscosities range from 0.019 (± 0.004) to 0.13 (± 0.02) Pa s. At constant temperature, viscosity increases with increasing pressure up to  8.5 GPa but then decreases between  8.5 and 13 GPa. The change in the pressure dependence of viscosity is likely associated with structural changes of the liquid that occur upon compression. By combining our results with recently published 0.1 MPa peridotite liquid viscosities [D.B. Dingwell, C. Courtial, D. Giordano, A. Nichols, Viscosity of peridotite liquid, Earth Planet. Sci. Lett. 226 (2004) 127–138.], the experimental data can be described by a non-Arrhenian, empirical Vogel-Fulcher-Tamman equation, which has been modified by adding a term to account for the observed pressure dependence of viscosity. This equation reproduces measured viscosities to within 0.08 log₁₀-units on average. We use this model to calculate viscosities of a peridotitic magma ocean along a liquid adiabat to a depth of  400 km and discuss possible effects on viscosity at greater pressures and temperatures than experimentally investigated.     

Signatures in flowing fluid electric conductivity logs

Flowing fluid electric conductivity logging provides a means to determine hydrologic properties of fractures, fracture zones, or other permeable layers intersecting a borehole in saturated rock. The method involves analyzing the time-evolution of fluid electric conductivity (FEC) logs obtained while the well is being pumped and yields information on the location, hydraulic transmissivity, and salinity of permeable layers. The original analysis method was restricted to the case in which flows from the permeable layers or fractures were directed into the borehole (inflow). Recently, the method was adapted to permit treatment of both inflow and outflow, including analysis of natural regional flow in the permeable layer. A numerical model simulates flow and transport in the wellbore during flowing FEC logging, and fracture properties are determined by optimizing the match between simulation results and observed FEC logs. This can be a laborious trial-and-error procedure, especially when both inflow and outflow points are present. Improved analyses methods are needed. One possible tactic would be to develop an automated inverse method, but this paper takes a more elementary approach and focuses on identifying the signatures that various inflow and outflow features create in flowing FEC logs. The physical insight obtained provides a basis for more efficient analysis of these logs, both for the present trial and error approach and for a potential future automated inverse approach. Inflow points produce distinctive signatures in the FEC logs themselves, enabling the determination of location, inflow rate, and ion concentration. Identifying outflow locations and flow rates typically requires a more complicated integral method, which is also presented in this paper.     

鲁东南岚山头超高压变质岩流体包裹体特征与板片折返史

鲁东南岚山头含柯石英榴辉岩主要产于花岗质片麻岩内,是苏鲁超高压变质带主要榴辉岩体密集分布区之一。流体包裹体研究表明,榴辉岩矿物及细脉石英中捕获有四种类型包裹体:在超高压-高压榴辉岩相条件下捕获的 N_2±CO_2包裹体;在高压榴辉宕重结晶阶段被捕获的 CO_2-H_2O 包裹体和含子矿物高盐度 H_2O 溶液包裹体:在超高压岩石折返过程中的最晚(角闪岩相退变质甚至更晚)阶段捕获的低盐度 H_2O 溶液包裹体。利用榴辉岩矿物及脉体石英中捕获的流体包裹体相互期次关系,可以对本区超高压变质作用板片折返过程中的流体演化史进行重建。