Structural features and petroleum geology of the fold-thrust belt in the southern Tarim basin, China

The west Kunlun fold-thrust belt (WKFTB) and the Altun fold-thrust belt (AFTB) are respectively located in the southern margin of the Tarim basin, NW China. The analyses of typical structures and regional dynamics of the fold-thrust belts reveal their different structural and petroleum features and mechanisms. WKFTB differs from AFTB by abundant fault-related folds and triangles zones, and was formed by northward extrusion of the west Kunlun orogen. AFTB was affected synchronously by northward extrusion of the Altun orogen and the sinistral strike-slipping of the Altun Fault, so it is characterized by the minor scale and the monotonous structural styles. The Aqike anticline and the Aqike fault, of which the strikes are orthogonal to the strike of the fold-thrust belts, are regarded as the adjustive structures between both of the fold-thrust belts. The oil-gas pools of WKFTB develop mainly in the faulted-related anticline traps, but the oil-gas pools of AFTB develop mainly in the low fault-block and anticlines traps related with the paleo-uplifts. There are different exploration countermeasures for both of the fold-thrust belts.     

Development of joints and shear fractures in the Kuqa depression and its implication to regional stress field switching

The superimposed basin must have undergone the changes of regional stress field. Study on the nature and switch of regional stress field of superimposed basin is very useful to understanding its stress state and tectonic events during its formation and evolution. As sensitive markers of small stress changes, joint and shear fracture, characterized by consistency of orientation over wide area, can be used to reconstruct paleostress state and its evolution. Detailed observations and analysis on the orientations, geometrical patterns, sequences of joints and shear fractures and their chronological relation to faults and folds show that, the NEE-SWW systematic joints and NNW-SSE systematic joints developed in the Mesozoic and Cenozoic strata are much more prominent than NW-SE systematic joints and shear fractures with different orientations. And the NWW-SEE and NW-SE systematic joints formed later than NEE-SWW systematic joints but earlier than shear fractures with different orientations. According to the relationships between joint and shear fractures and stress, the NEE-SWW systematic joints are inferred to result from lateral weak extension caused by the late Cretaceous regional uplift, while the NNW-SSE and NW-SE systematic joints are interpreted as syn-tectonic deformation relating to strong N-S compression in the Neogene. But some conjugate shear fractures occur probably due to sinistral strike-slip faulting in the Kuqa depression. At the beginning of the Neogene, the stress field changed and the maximal principal stress σ1 switched from vertical to horizontal.     

Integrated spatial sampling modeling of geospatial data

Sampling is to, by efficient selection of samples, acquire the accurate information about the population (the research object) at less cost. Spatial sampling is a kind of sampling toward geospatial objects or features with spatial correlation. The differences between effi-cient sampling and completely universal survey lie in quality, time and cost. Sampling provides a kind of economical, prompt and accurate survey[13]. Efficient spatial sampling can be regarded as the optimization of the sampl…     

GPS水汽遥感中的大气干延迟局地订正模型研究

在GPS遥感水汽过程中,大气干延迟模型的精度直接影响水汽遥感的精度。根据广东清远站1995～2001年的气象探空资料,计算了GPS水汽测量中的实际大气干延迟。在此资料基础上,利用地面气象要素建立了大气干延迟的年和分月局地订正模型。分析结果表明,年模型的精度优于目前广泛使用的普适模型;月模型与年模型相比,效果不是很明显,建立局地分月订正模型意义不大;在对高度角的敏感程度上,局地模型略大些;当高度角小于75时,大气干延迟弯曲路径与直线路径之差ΔS随天顶角增大而迅速增大。     

内蒙古镁铁质-超镁铁质岩型铜镍矿床成矿条件与找矿远景分析

按构造环境控岩控矿特点,划分区内铜镍型矿成矿(岩)带,分析成矿条件,研究了与该类矿床成矿有关的镁铁质岩、超镁铁质岩分布规律及铜镍硫化物成矿特征,提出了找矿方向和建议.     

重庆市地学旅游资源研究

重庆市的地学旅游资源极其丰富，可划分为岩石圈旅游资源等4个大类、地质旅游资源等11个基本类型、地层旅游景观等18种景观和黔江县上白垩统正阳组剖面等107个景区(景点)。它们具有类型齐全、分布广泛、岩溶精品和森林独特的特点。从加强岩溶旅游资源调查等6个方面入手，就可提高对它们的开发利用程度.     

人工神经网络在岩体质量分级中的应用

结合四川省金沙江某水电站工程实例，应用BP人工神经网络方法建立3层BP网络模型，选取岩石单轴抗压强度等6个影响因素为输入变量，对坝基复杂岩体进行质量分级。通过机算机Visual C 语言编程实现神经网络模型，进行网络的学习和运算。以神经网络合理结构分析方法选取合理结构，确定合理隐层单元的数量，提高网络测试的精度。对测试结果的分析发现，经过优化的BP网络模型经多次学习后，测试精度提高，结果可靠，取得较好的实际应用效果。     

冬小麦遥感冠层温度监测土壤含水量的试验研究

在冬小麦主要生育期(2002年4月初到5月底),对不灌溉的冬小麦测定了冠层温度、地温、气温以及土壤含水量,计算了冠气温差且分析了冠层温度和冠气温差与不同土层厚度的土壤含水量相关关系。结果表明:14:00的冠层温度能较好地反映20cm土层的土壤含水量变化,但与其它各土层相关性有较大的波动性;14:00的冠气温差能较好地反映40cm以上土层的土壤含水量变化,二者的相关性很高,在20cm、40cm土层,两者相关系数R2分别为0.98866、0.99389,这为用区域遥感数据反演主要生育期冬小麦的冠气温差进而监测区域40cm土壤含水量提供了实验性的依据;拔节期和灌浆期,用14:00冠气温差来拟合各土壤层的土壤含水量有较高的精度,从而为用区域遥感数据监测区域土壤含水量提供了经验性的模型。     

新疆天山表壳元素地球化学特征

根据天山地区(42～44^oN，81～89^oE)1：20万，七探采集的900余个岩石样品的分析结果，基于全样本统计和迭代剔除方法，得到新疆天山地区表壳(出露地壳)的39种元素丰度值；对其中的SiO2、TiO2、Al2O3、TFe2O3、MgO、MnO、CaO、Na2O、K2O、P2O5 10种常量元素，按氧化物之和为100％进行归算。与全球大陆上地壳元素丰度值相比，天山地区表壳元素丰度富集SiO2、MnO和Ag、As、Hj、Sb元素，明显亏损CaO和。Be、Co、Cr、Ni、Mo、Sn，V、W等元素。从元素比值来看，该区表壳的Ba/La、K／La、K／Th、Nb/La、Th/La、Y／La值与全球大陆上地壳相应元素值相当；而K／Na、La／As、La／Sb值明显低于全球大陆上地壳。该区表壳化学成分相当于花岗闪长岩，同时表现出相对富钠和As、Sb元素的特征；这一地球化学特征与区内出露的表壳岩石主要是加里东期和海西期岛弧造山作用的产物有关，相对富钠的成分特征与岛弧岩浆活动中的Adakite质岩浆作用有关。     

夏季红枫湖地区农田土壤-大气界面汞交换通量的初步研究

采用动力学通量箱法(Dynamic Flux Chamber)与高时间分辨率大气测汞仪联用技术对贵州红枫湖地区土壤-大气界面间汞交换通量进行了初步研究.结果显示,红枫湖地区土壤-大气界面间汞交换通量变化范围为-8.6 ng～215.3 ng@m-2@h-1,平均27.4士40.1 ng/m2@h(n=255);且土壤与大气界面间的汞交换是双向的既有土壤汞的释放,又有大气汞的沉降,主要以土壤汞的释放为主(n释放=253,n沉降=2n).土壤汞的释放通量与土壤温度、气温、光照强度有强相关关系,相关系数分别为0.80、0.83、0.74.