Effects of an Acute Hypoxic Event on Microplankton Community Structure in a Coastal Harbor of Southern California

Fish mortality and hypoxic events occur in many coastal and inland systems and may result from natural or anthropogenically mediated processes. The effects of consequent changes in water biogeochemistry have been investigated for communities of benthic invertebrates and pelagic metazoans. The responses of micro-plankton assemblages, however, have remained largely unstudied. The northern basin of King Harbor, a small embayment within Santa Monica Bay, CA, USA, suffered a massive fish kill in March 2011 as a consequence of acute hypoxia. Dissolved oxygen concentrations < 0.1 ml?l^?1 were measured in the northern basin of the harbor for several days following the mortality event, and a strong spatial gradient of oxygen was observed from the northern basin to waters outside the harbor. The microplankton community within King Harbor differed significantly from a diatom-dominated community present in neighboring Santa Monica Bay. The latter region appeared unaffected by physicochemical changes, induced by the fish kill, that were observed within the harbor. A trophic shift was observed throughout King Harbor from a photoautotrophic-dominated assemblage to one of heterotrophic forms, with relative abundances of bacterivorous ciliates increasing by more than 80 % in the most impacted part of the harbor. Significant changes in community structure were observed together with dramatically reduced photosynthetic yield of the remaining phytoplankton, indicating severe physiological stress during the extreme hypoxia.     

A matched-filter approach to wave migration

Wave migration is a technique in which the reflectivity of the Earth is interpreted by extrapolating the fields measured on the surface into the ground. The motivation of this paper is to develop a generalized imaging algorithm based on a matched-filter that shows a mathematical connection between currently used migration techniques. The filter is determined by estimating the received signal when a specific test target exists in the ground. To keep the method general, a point scatterer is used as this target, while distributed objects are modeled without changing the filter characteristics by a collection of independent point scatterers. Also, the specific forms of the Green's functions, which describe wave propagation in the ground, are not included in the formation of this approach leaving more freedom in the implementation. When the filter is applied to measured data of a monostatic survey, the resulting method becomes a forward scattering problem in which these data become time-reversed current sources. Next, specific forward scattering techniques are applied to this matched-filter approach and the resulting methods are compared to traditional migration techniques. In doing so, we find that the general form of most migration techniques can be shown using a matched-filter, while the major differences lie in the actual interpretation of the wave propagation that is used to implement the filter. The similarities of the matched-filter-based approaches to traditional techniques are used to show a connection and general overview of wave migration. Finally, these methods are applied to data collected over pipes buried in sand.     

Geochemical Evaluation of the Permian Ecca Shale in Eastern Cape Province,South Africa: Implications for Shale Gas Potential

Shale gas has been the exploration focus for future energy supply in South Africa in recent time. Specifically, the Permian black shales of the Prince Albert, Whitehill, Collingham, Ripon and Fort Brown Formations are considered to be most prospective rocks for shale gas exploration. In this study,outcrop and core samples from the Ecca Group were analyzed to assess their total organic carbon(TOC), organic matter type, thermal maturity and hydrocarbon generation potential. These rocks have TOC ranging from 0.11 to 7.35 wt%. The genetic potential values vary from 0.09 to 0.53 mg HC/g,suggesting poor hydrocarbon generative potential. Most of the samples have Hydrogen Index(HI) values of less than 50 mg HC/g TOC, thus suggesting Type-Ⅳ kerogen. Tmax values range from 318℃ to601℃, perhaps indicating immature to over-maturity of the samples. The vitrinite reflectance values range from 2.22% to 3.93%, indicating over-maturity of samples. Binary plots of HI against Oxygen Index(OI), and HI versus Tmax show that the shales are of Type II and mixed Type Ⅱ-Ⅲ kerogen.Based on the geochemical data, the potential source rocks are inferred as immature to over-matured and having present-day potential to produce gas.     

Array measurements of the bottom boundary layer and the internal wave field on the continental slope

Abstract

An array of current meters was placed on the continental slope and rise for two months in the autumn of 1970. The bottom boundary layer was penetrated on the slope. On the smallest array scale, of the order of 1 kilometer, the array functioned as a directional internal wave antenna. Moving shoreward, the current spectra show strong suppression of the inertial peak and strong enhancement of the semidiurnal tide. The measured wave number spectra show that the tidal energy is almost completely baroclinic, and probably being generated in the region where the slope becomes “critical” for the tidal period. If this area is typical of worldwide conditions, a substantial fraction of the dissipation of surface tides takes place on the continental slopes by conversion to baroclinic waves. The bottom boundary layer has been modeled by an extension of the work of Ellison (1956) to a sloping boundary in a fluid of positive stability. An equivalent constant eddy coefficient has the value 3 cm²/sec as determined from the measurements.     

A simple method to help determine landslide susceptibility from spaceborne InSAR data: the Montescaglioso case study

On December 3, 2013, a large complex landslide was triggered SW of the town of Montescaglioso (Southern Italy), causing the destruction of roads, commercial buildings and private dwellings, as well as several direct and indirect economic losses. A set of interferometric ground measurements acquired by the Cosmo-SkyMed satellite constellation and processed by means of the SqueeSAR algorithm was used to study the pre-event slope displacements in the entire Montescaglioso municipal area. Data span from January 30, 2012, to December 2, 2013, and show average line-of-sight velocities of 1–10 mm/year in the slope sector ultimately affected by the collapse. In retrospect, a time series analysis of the radar targets was performed in order to identify and characterize all the slope instabilities in proximity of the town. This was based on the setup of characteristic thresholds of displacement. The procedure permitted to locate several areas which recurrently exceeded these previously established thresholds, in consistency with the amount of precipitation. In particular, the major source of potential hazard in the area was indeed found where the December 3, 2013, landslide eventually occurred. The results of this quick data processing technique were validated through comparison with two independently developed landslide maps. This simple method, which is not supposed to diminish the importance of geomorphologic field surveys, could improve both the accuracy and the update rate of landslide susceptibility maps. Not relying on arbitrary or empirically derived approaches, it has the advantage of computing statistically based thresholds specific for each time series. By indicating the slope sectors in higher need of deeper in situ investigation, more support could be provided to administrative bodies for the processes of risk assessment and management.     

Comparison between in situ cone resistance and laboratory strength for overconsolidated north sea clays

Abstract

Cone resistance and laboratory strength measurements have been compared for stiff overconsolidated clays from five oil and gas fields in the North Sea. The clays considered are glacial in origin. The best agreement between cone resistance and laboratory strength is found by using an N_k factor equal to 17 in the formula

q_c = N_k . S_u + γZ.

The study shows that the cone gives highly reproducible results, whereas there is a considerable scatter in the laboratory strength determinations. When making use of CPTs for preliminary design, the authors recommend assuming an N_k of 15–20, depending on the type of problem under consideration.     

A vessel‐deployed passive postlarval collector to assess settlement of the American lobster Homarus americanus

Passive collectors are used widely in postlarval settlement and recruitment monitoring of spiny lobsters and crabs, but they have only been used in a limited way with clawed lobsters. For nearly two decades, diver‐based suction sampling has served to monitor spatial‐temporal patterns of American lobster (Homarus americanus) postlarval settlement and early juvenile abundance in shallow near‐shore nurseries. Collectors could reveal settlement patterns in zones beyond the practical limits of diving. In 2005, we launched a fisher‐scientist collaboration to evaluate the performance of passive collectors designed to extend the reach of sampling, and to be deployable from a vessel equipped with a standard pot‐hauler. Building on previous designs, our collectors comprised wire mesh trays lined with fine screening on the floor and walls and filled with cobble to simulate natural nursery habitat. Results indicate that no newly settled lobsters were lost during the retrieval process, and densities of young‐of‐year lobsters found in the collectors were similar to those in directly adjacent natural cobble habitat sampled by divers with suction samplers. The collectors also proved to be effective samplers of juvenile fish and crabs, suggesting a possibility for wider application. This success bodes well for expanded deployment of cobble collectors to broaden our understanding of the recruitment processes of lobster and other cobble‐dwelling fauna along the coast of New England, United States and Atlantic Canada.     

Indicators of abundance and spatial distribution of lobsters (Homarus americanus) from standard traps

Indicators of abundance for American lobster (Homarus americanus) based on 8 years of trap catch rates (catch‐per‐unit‐effort, CPUE) were evaluated. Volunteer harvesters recorded count, sex and size of lobsters captured in standard traps on a daily basis during the fishing season in coastal Nova Scotia, Canada. We examined the extent to which standardised CPUEs of prerecruits predict the future catches of legal sizes and explored spatial patterns in the abundance of lobsters of different size and reproductive status. The standardised CPUE of prerecruits was correlated with legal size catches in only one of five areas examined. This area had a strong signal of incoming recruitment. Improving the capacity of prerecruit CPUE for predicting legal size catches several years later most likely lies with model incorporation of variables associated with catchability. The spatial distribution of catch rates showed that the area with the highest historical landings per unit area also had the highest relative abundance of prerecruits. The spatial distribution data point to further areas of research related to recruitment processes in lobster in coastal Nova Scotia.     

A test of the ADV-based Reynolds flux method for in situ estimation of sediment settling velocity in a muddy estuary

Under conditions common in muddy coastal and estuarine environments, acoustic Doppler velocimeters (ADVs) can serve to estimate sediment settling velocity (w _s) by assuming a balance between upward turbulent Reynolds flux and downward gravitational settling. Advantages of this method include simple instrument deployment, lack of flow disturbance, and relative insensitivity to biofouling and water column stratification. Although this method is being used with increasing frequency in coastal and estuarine environments, to date it has received little direct ground truthing. This study compared in situ estimates of w _s inferred by a 5-MHz ADV to independent in situ observations from a high-definition video settling column over the course of a flood tide in the bottom boundary layer of the York River estuary, Virginia, USA. The ADV-based measurements were found to agree with those of the settling column when the current speed at about 40 cm above the bed was greater than about 20 cm/s. This corresponded to periods when the estimated magnitude of the settling term in the suspended sediment continuity equation was four or more times larger than the time rate of change of concentration. For ADV observations restricted to these conditions, ADV-based estimates of w _s (mean 0.48±0.04 mm/s) were highly consistent with those observed by the settling column (mean 0.45±0.02 mm/s). However, the ADV-based method for estimating w _s was sensitive to the prescribed concentration of the non-settling washload, C _wash. In an objective operational definition, C _wash can be set equal to the lowest suspended solids concentration observed around slack water.