From noise correlation to resonant ultrasound spectroscopy in rock acoustics

This article introduces an alternative experimental procedure for measuring the elastic properties of a solid material at laboratory scale, using both the principles of passive seismic interferometry and resonance ultrasound spectroscopy. We generate noise into the studied sample with a pneumatic air blow gun, and we cross‐correlate the signals recorded with two passive piezoelectric sensors put in soft contact with the sample surface. Resonance phenomena are induced in the sample, but in contrast with conventional resonance ultrasound spectroscopy experiments, we have no control over the injected frequencies that are sent all together within the noise spectrum. The spectrum of the correlogram is a good approximation of the resonance spectrum of the vibrating sample and can be inverted in terms of the elastic moduli of the constituent material of the sample. The experimental procedure is validated on samples made of standard materials (here, aluminium and Plexiglas) by consistently comparing the inverted elastic velocities with the velocities independently measured with the conventional technique of ultrasonic pulse transmission. Moreover, we got similar positive results on dry rock samples, such as Vilhonneur limestone. These encouraging preliminary results open up promising prospects for monitoring fluid substitution in rock samples using the technique described in this paper.     

Seasonal dynamics and stoichiometry of the planktonic community in the NW Mediterranean Sea: a 3D modeling approach

The 3D hydrodynamic Model for Applications at Regional Scale (MARS3D) was coupled with a biogeochemical model developed with the Ecological Modular Mechanistic Modelling (Eco3M) numerical tool. The three-dimensional coupled model was applied to the NW Mediterranean Sea to study the dynamics of the key biogeochemical processes in the area in relation with hydrodynamic constraints. In particular, we focused on the temporal and spatial variability of intracellular contents of living and non-living compartments. The conceptual scheme of the biogeochemical model accounts for the complex food web of the NW Mediterranean Sea (34 state variables), using flexible plankton stoichiometry. We used mechanistic formulations to describe most of the biogeochemical processes involved in the dynamics of marine pelagic ecosystems. Simulations covered the period from September 1, 2009 to January 31, 2011 (17 months), which enabled comparison of model outputs with situ measurements made during two oceanographic cruises in the region (Costeau-4: April 27–May 2, 2010 and Costeau-6: January 23–January 27, 2011).     

Oxygen isotope systematics of gem corundum deposits in Madagascar: relevance for their geological origin

The oxygen isotopic composition of gem corundum was measured from 22 deposits and occurrences in Madagascar to provide a gemstone geological identification and characterization. Primary corundum deposits in Madagascar are hosted in magmatic (syenite and alkali basalt) and metamorphic rocks (gneiss, cordieritite, mafic and ultramafic rocks, marble, and calc-silicate rocks). In both domains the circulation of fluids, especially along shear zones for metamorphic deposits, provoked in situ transformation of the corundum host rocks with the formation of metasomatites such as phlogopite, sakenite, and corundumite. Secondary deposits (placers) are the most important economically and are contained in detrital basins and karsts. The oxygen isotopic ratios (¹⁸O/¹⁶O) of ruby and sapphire from primary deposits are a good indicator of their geological origin and reveal a wide range of δ¹⁸O (Vienna Standard Mean Ocean Water) between 1.3 and 15.6‰. Metamorphic rubies are defined by two groups of δ¹⁸O values in the range of 1.7 to 2.9‰ (cordieritite) and 3.8 to 6.1‰ (amphibolite). “Magmatic” rubies from pyroxenitic xenoliths contained in the alkali basalt of Soamiakatra have δ¹⁸O values ranging between 1.3 and 4.7‰. Sapphires are classified into two main groups with δ¹⁸O in the range of 4.7 to 9.0‰ (pyroxenite and feldspathic gneiss) and 10.7 to 15.6‰ (skarn in marble from Andranondambo). The δ¹⁸O values for gem corundum from secondary deposits have a wide spread between −0.3 and 16.5‰. The ruby and sapphire found in placers linked to alkali basalt environments in the northern and central regions of Madagascar have consistent δ¹⁸O values between 3.5 and 6.9‰. Ruby from the placers of Vatomandry and Andilamena has δ¹⁸O values of 5.9‰, and between 0.5 and 4.0‰, respectively. The placers of the Ilakaka area are characterized by a huge variety of colored sapphires and rubies, with δ¹⁸O values between −0.3 and 16.5‰, and their origin is debated. A comparison with oxygen isotope data obtained on gem corundum from Eastern Africa, India, and Sri Lanka is presented. Giant placer deposits from Sri Lanka, Madagascar, and Tanzania have a large variety of colored sapphires and rubies with a large variation in δ¹⁸O due to mingling of corundum of different origin: mafic and ultramafic rocks for ruby, desilicated pegmatites for blue sapphire, syenite for yellow, green, and blue sapphire, and skarn in marbles for blue sapphire.     

Gem corundum deposits of Madagascar: A review

Madagascar is one of the most important gem-producing countries in the world, including ruby and sapphires. Gem corundum deposits formed at different stages in the geological evolution of the island and in contrasting environments. Four main settings are identified: (1) Gem corundum formed in the Precambrian basement within the Neoproterozoic terranes of southern Madagascar, and in the volcano-sedimentary series of Beforona, north of Antananarivo. In the south, high-temperature (700 to 800 °C) and low-pressure (4 to 5 kbar) granulites contain deposits formed during the Pan-African orogenesis between 565 and 490 Ma. They accompany mafic and ultramafic complexes (ruby deposits of the Vohibory group), skarns at the contact between Anosyan granites and the Proterozoic Tranomaro group (sapphire deposits of the Tranomaro–Andranondambo district), and shear-zone corridors cross-cutting feldspathic gneisses, cordieritites and clinopyroxenites in the Tranomaro, Vohimena and Androyan metamorphic series (biotite schist deposits of Sahambano and Zazafotsy, cordieritites of Iankaroka and Ambatomena). The circulation of fluids, especially along discontinuities, allowed in-situ alkaline metasomatism, forming corundum host rocks related to desilicified granites, biotitites, “sakenites” and “corundumites”. (2) Gem corundum also occurs in the Triassic detrital formations of the Isalo group, as giant palaeoplacers in the Ilakaka–Sakaraha area. Here, sapphires and rubies may come from the metamorphic granulitic terranes of southern Madagascar. (3) Gem corundum deposits occur within the Neogene-Quaternary alkali basalts from Ankaratra (Antsirabe–Antanifotsy area) and in the Ambohitra Province (Nosy Be, Ambato and Ambondromifehy districts). Primary deposits are rare, except at Soamiakatra where ruby in gabbroic and clinopyroxenite xenoliths within alkali-basalts probably derive from mantle garnet peridotites. The blue-green-yellow sapphires typical of basaltic fields are always recovered in palaeoplacer (in karst formed upon Jurassic limestones from the Montagne d'Ambre, Antsiranana Province) and alluvial and soil placers (Ankaratra volcanic massif). (4) Deposits occur within Quaternary eluvial, colluvial and alluvial concentrations, such as high-quality rubies from the Andilamena and Vatomandry deposits.     

Roman road pollution assessed by elemental and lead isotope geochemistry in East Belgium

The ability of inorganic geochemistry to record environmental change and especially human impact has been evidenced by several studies across Europe, especially in peat, where it is possible to record the impact of agriculture, mining and other industries. However, despite the numerous investigations on the impact of ancient human activities such as ore mining and smelting, little attention has been paid to geochemistry as a tool to solve problems of palaeopollution in the surroundings of archaeological sites. This paper presents geochemical evidence of the impact of a possible early Roman road built in SE Belgian peatland. Increased Zn and Pb concentrations suggest that Pb–Zn ores were transported on the road. Lead isotope analyses suggest that these ores are locally derived, being compatible with those found in the nearby Pb–Zn ore deposits from East Belgium. Present results provide direct evidence that East Belgian Pb–Zn ores were already being mined during Roman times, i.e. earlier than previously suspected (i.e. 14th century) and that Zn appears to be relatively immobile here. On a broader scale, it also demonstrates that such an early road already had an impact on the environment in terms of metal pollution. This paper enlarges on the range of possibilities offered by geochemistry in the field of geoarchaeology.     

The city,the (Member) state,and the European Union

This contribution to a Debate on “The Nation-State and the city” foregrounds the recently adopted Urban Agenda for the European Union. It discusses the new role of cities in the European policy making process and its relevance for relations between State and City in the light of EU membership.     

Deposition processes from echo-character mapping along the western Algerian margin (Oran–Tenes), Western Mediterranean

The westernmost Algerian margin (south Algero-Provençal basin) depicts a few offshore active faults, moderate to rare seismicity, and generally very steep slopes (>16°). We classified and mapped 12 echo types according to their sub-bottom acoustic facies observed on this margin on 2–5.2 kHz Chirp echo-sounder data (MARADJA 2003 cruise). The echo-character maps are interpreted in terms of sedimentary processes: the B1 echo type (parallel to subparallel high- to low-amplitude sub-bottom reflections), mainly in the deep basin, corresponds to hemipelagic sedimentation; R1 (prolonged single echo with no sub-bottoms) and R2 (small irregular overlapping hyperbolae) echo types, generally near or in canyon systems, are associated with turbidity currents or more rarely to contour currents or mass-transport deposits such as slumps, slides and debris flows; the transparent echo types (T1–T5) and R3 (chaotic lens of low-amplitude reflections on top of higher amplitude), often located at the foot of the slope or canyons walls, typically indicate mass-transport deposits (like slides) or turbidites. Large zones that display a large variety of echo types are evidenced in the study area and are generally associated with turbidity currents, but could also be associated with bottom currents. It appears that active tectonics plays a significant role in this part of the margin which presents a few active faults offshore but also a strong and relatively frequent seismicity onland. The general pattern of the distribution of mass-transport deposits is particular – i.e. many but small slides all along the margin – and suggests a probable triggering by recurrent earthquake shakings. However, active tectonics is not the only factor influencing the deposition pattern, as some zones seem characterized by predominant strong turbidity currents transporting sediments far away from the foot of the margin, whereas others depict retrogressive erosion features on the slope, i.e. small slides scarps in gullies rather than transport by turbidity currents. In particular, the rivers sediment discharge fluxes and the geomorphologic characteristics of the margin seem to be very important factors too.