Wave-like aquatic propulsion of mono-hull marine vessels

The present paper describes results of the experimental investigation of a small-scale mono-hull model boat propelled by a localised flexural wave propagating along the plate of finite width forming the boat's keel. Forward propulsion of the boat was achieved through flexural wave propagation in the opposite direction, which is similar to the aquatic propulsion used in nature by stingrays. The model boat under consideration underwent a series of tests both in a Perspex water tank and in an experimental pool. In particular, the forward velocity of the boat has been measured for different frequencies and amplitudes of the flexural wave. The highest velocity achieved was 32 cm/s. The thrust and propulsive efficiency have been measured as well. The obtained value of the propulsive efficiency in the optimum regime was 51%. This indicates that the efficiency of this type of aquatic propulsion is comparable to that of dolphins and sharks (around 75%) and to that of a traditional propeller (around 70%). In contrast with a propeller though, the wave-like aquatic propulsion has the following advantages: it does not generate underwater noise and it is safe for people and marine animals.     

Control of Aptian palaeobathymetry on turbidite distribution in the Buchan Graben,Outer Moray Firth,Central North Sea

It is widely recognised that palaeobathymetry is a key control on the distribution of turbidite deposits. Thus, the utilisation of palaeobathymetric surfaces as an input for numerical turbidity current modelling offers a potentially powerful method to predict the distribution of deep marine sands in ancient (subsurface or outcrop) successions. Such an approach has been tested on an Aptian turbidite deposit from the Buchan Graben, UK Central North Sea, where modelled sand distributions could be quality controlled against available well data.     

Structurally controlled hydrothermal dolomites in Albian carbonates of the Asón valley,Basque Cantabrian Basin,Northern Spain

Shallow marine carbonate sedimentation dominated during the Albian in the western part of the Basque Cantabrian Basin in Northern Spain, forming the large Ramales Platform. This platform originated on a less subsiding tectonic block facing deeper and more subsiding areas to the south and east, which were created by tectonic activity in the Basin. Fracture-related hydrothermal dolomites hosted in these Albian carbonates are well exposed in the Asón valley area. Mapping in the studied area revealed several dolomite bodies related to main faults that cut the stratification almost at right angles. The bodies show a vertical development along fault-strike up to 900 m thick from which kilometre-scale branches expand following the stratification. Dolomitization is pervasive and independent of the limestone facies. Main dolomite facies are fine replacive, sucrosic and saddle. Petrography, C, O and Sr isotopes and fluid-inclusion analysis support a polyphase hydrothermal dolomitization at fluid temperatures between 75 °C and 240 °C and highly variable salinity of up to 22 wt.% NaCl. Fine dolomite replaced limestone first and then, sucrosic and saddle dolomites replaced part of the first dolomite and cemented newly created fracture porosity together with different calcite cements. Zebra dolomites and hydroclastic breccias are products of this later stage. Burial analysis of the host rock supports maximum burial temperatures of 80 °C and intense tectonic activity from the Albian to Turonian with a latest Albian peak subsidence. Albian stretching of the crust and subsequent ascent of the isotherms in the area is suggested to have produced sufficient heat to the dolomitizing fluids. The structural analysis indicates a strong transtensional tectonic activity in the studied area during Albian to Turonian time with the creation of an overstep between W–E trending and N–S trending faults. Fluids moved from subsiding areas to fractured uplifted parts of the Ramales Platform, enhanced by diapiric activity.     

Origin of transverse folds in an extensional growth-fault setting: Evidence from an extensive seismic volume in the western Gulf of Mexico

Growth faults in gravity-driven extensional provinces are dominated by coast-parallel trends, but coast-perpendicular (transverse) trends are far less documented. The Clemente–Tomas fault in the inner Texas shelf has corrugations that are transverse to the fault and that plunge downdip. A large (8500 km²), high-quality, 3D seismic survey allows a uniquely encompassing perspective into hanging-wall deformation above this corrugated fault surface. Synextensional strata in the hanging wall are folded into alternating transverse ridges and synclines, typically spaced 10 km apart. Forward modelling in dip profiles of an extensional fault having three ramps produces ramp basin-rollover pairs that compare with the seismically revealed ridges and synclines. As they translated down the undulose fault plane, ramp basins and rollovers were juxtaposed along strike, forming the hanging-wall ridges and synclines observed offshore Texas. Fault-surface corrugations correlate broadly with footwall structure. We infer that corrugations on the Clemente–Tomas fault formed by evacuation of an allochthonous salt canopy emplaced in the late Eocene to early Oligocene. Early salt evacuation (Oligocene) created an undulose topography that influenced incipient Clemente-Tomas fault segments as they merged to form an inherently undulose fault. Late salt evacuation (early Miocene) further deformed this fault surface.     

Seabed morphology and gas venting features in the continental slope region of Krishna–Godavari basin,Bay of Bengal: Implications in gas-hydrate exploration

Increased oil and gas exploration activity has led to a detailed investigation of the continental shelf and adjacent slope regions of Mahanadi, Krishna–Godavari (KG) and Cauvery basins, which are promising petroliferous basins along the eastern continental margin of India. In this paper, we analyze the high resolution sparker, subbottom profiler and multibeam data in KG offshore basin to understand the shallow structures and shallow deposits for gas hydrate exploration. We identified and mapped prominent positive topographic features in the bathymetry data. These mounds show fluid/gas migration features such as acoustic voids, acoustic chimneys, and acoustic turbid layers. It is interesting to note that drilling/coring onboard JOIDES in the vicinity of the mounds show the presence of thick accumulation of subsurface gas hydrate. Further, geological and geochemical study of long sediment cores collected onboard Marion Dufresne in the vicinity of the mounds and sedimentary ridges shows the imprints of paleo-expulsion of methane and sulfidic fluid from the seafloor.     

Nitrogen inputs to seventy-four southern New England estuaries: Application of a watershed nitrogen loading model

Excess nitrogen inputs to estuaries have been linked to deteriorating water quality and habitat conditions which in turn have direct and indirect impacts on aquatic organisms. This paper describes the application of a previously verified watershed loading model to estimate total nitrogen loading rates and relative source contributions to 74 small-medium sized embayment-type estuaries in southern New England. The study estuaries exhibited a gradient in nitrogen inputs of a factor of over 7000. On an areal basis, the range represented a gradient of approximately a factor of 140. Therefore, all other factors being equal, the study design is sufficient to evaluate ecological effects conceptually tied to excess nitrogen along a nitrogen gradient. In addition to providing total loading inputs rates to the study estuaries, the model provides an estimate of the relative contribution of the nitrogen sources from each watershed to each associated estuary. Cumulative results of this analysis reveal the following source ranking (means): direct atmospheric deposition (37%), ≈wastewater (36%), >indirect atmospheric deposition (16%) > fertilizer (12%). However, for any particular estuary the relative magnitudes of these source types vary dramatically. Together with scientific evidence on symptoms of eutrophication, the results of this paper can be used to develop empirical pressure-state models to determine critical nitrogen loading limits for the protection of estuarine water quality.     

Physical characterisation and a biologically focused classification of “seamounts” in the New Zealand region

The physical, biological, and oceano‐graphic characteristics of seamounts of the New Zealand region of the South Pacific Ocean are poorly known. The aim of this study was to present a synopsis of the physical characteristics of seamounts within the region, and to present a preliminary classification using biologically meaningful variables. Data for up to 16 environmental variables were collated and used to describe the distribution and characteristics of the c. 800 known seamounts in the New Zealand region. Seamounts span a wide range of sizes, depths, elevation, geological associations and origins, and occur over the latitudinal range of the region, lying in different water masses of varying productivity, and both near shore and off shore. As such, it was difficult to generally describe New Zealand seamounts, as there is no “typical” feature. Thirteen environmental variables were included in a multivariate cluster analysis to identify 12 seamount similarity groupings, for a subset of over half the known seamounts. The groupings generally displayed an appreciable geographic distribution throughout the region, and were largely characterised by a combination of four variables (depth at peak, depth at base, elevation, and distance from continental shelf). In the future, the findings of the present study can be tested to determine the validity and usefulness of the approach for directing future biodiversity research and informing management of seamount habitat.     

Sea Levels and Coastal Inundation Due to Tropical Cyclones in Indian Coastal Regions of Andhra and Orissa

Coastal inundation associated with extreme sea levels is the main factor which leads to the loss of life and property whenever a severe tropical cyclonic storm hits the Indian coasts. The Andhra and Orissa coasts are most vulnerable for coastal inundation due to extreme rise in sea levels associated with tropical cyclones. Loss of life may be minimized if extreme sea levels and associated coastal flooding is predicted well in advance. Keeping this in view, location specific coastal inundation models are developed and applied for the Andhra and Orissa coasts of India. Several numerical experiments are carried out using the data of past severe cyclones that struck these regions. The simulated inland inundation distances are found to be in general agreement with the reported flooding.     

Vulnerability Assessment at Village Level Due to Tides,Surges and Wave Setup

An assessment of cyclone risk and vulnerability at the village level has evolved, which is an important component of the information system for local level development action plans for preparedness and mitigation. Here, a case study for the Nellore district along the east coast of India is considered. Using maximum probable surges along the coast, total water level (TWL) due to the combined effect of surge, tide, and wind wave is computed for the most vulnerable coastal villages of the Nellore district due to any tropical cyclones. The computations suggest that the TWL along the Nellore coast varies from 2 m in the south to 4 m in the north.     

Role of Vertical Resolution in Numerical Models Towards the Intensification,Structure and Track of Tropical Cyclones

The impact of vertical resolution on the evolution and movement of tropical cyclones was studied using NCAR MM5 model with a horizontal resolution of 9 km. Four numerical experiments were performed with different vertical resolutions, that is, with 23 vertical levels as control experiment, and 36 vertical levels with high resolution in the lower troposphere, 33 vertical levels with high resolution in the upper troposphere and 46 vertical levels with increased vertical resolution throughout the troposphere as relative to base experiment. The results indicate that increased vertical resolution in the lower troposphere produces efficient intensification and better structure in terms of eye and eyewall. Increased vertical resolution at lower levels improves the prediction of vertical shear of horizontal wind. Experiments with high resolution in the lower troposphere and high resolution throughout the troposphere simulate better track up to 72 hours.