Simulation of additive transport from the land surface on the basis of experimental data on heat transfer in the atmospheric surface layer

A method is proposed to study the transport of a passive additive in the atmospheric surface layer with the use of the atmospheric transfer function. This method makes it possible to estimate the spatial distribution of the concentration of a passive additive in the atmospheric surface layer from the additive’s surface source without experimentally determining the vertical profile of the transport coefficient or without resorting to various hypotheses for the character of its behavior. The transfer function, which contains the information on the wind-field structure, can be obtained from simple one-point measurements of surface-and air-temperature fluctuations and from subsequent spectral processing of the data. The effects of the wind-velocity profile and turbulence on the spatial distribution of additive concentration are assessed. This method allows one to simplify experiments during development and verification of the models of atmospheric diffusion. This method may also be useful in emergency situations to predict the propagation of hazardous additives.     

Numerical Simulation of Wind Currents and Propagation of Impurities in the Balaklava Bay

We present the results of numerical experiments aimed at the simulation of the circulation of waters and transport of impurities in the Balaklava Bay for typical wind conditions established on the basis of the analysis of the data of in-situ measurements. The currents are computed by using the nonlinear σ-coordinate model. The specific features of the integral circulation and three-dimensional structure of the current field are investigated. The statistical characteristics of currents are estimated on the basis of the in-situ data on winds and model calculations. Possible scenarios of propagation of impurities from the coastal sources are analyzed for various hydrodynamic conditions. It is shown that the localized eddy structures in the current fields (in combination with the zones of intense vertical motion) can result in a complex character of the transport of substances in the bay and lead to the formation of local regions of maximum concentrations of impurities on the boundary of the north and central parts of the bay. __________ Translated from Morskoi Gidrofizicheskii Zhurnal, No. 4, pp. 43–58, July–August, 2005.     

Simulation of Hydrophysical Processes in Coastal Regions of the Sea

In the present work, we generalize the results of our investigations in the field of simulation of hydrophysical and ecological processes in coastal regions of various seas and some closed basins. The developed and applied mathematical models and the results of numerical experiments are briefly analyzed.     

Probing molecular-level transformations of dissolved organic matter: insights on photochemical degradation and protozoan modification of DOM from electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry

Molecular-level characterization of natural organic matter (NOM) has been elusive due to the inherent complexity of natural organic mixtures and to the fact that individual components are often polar and macromolecular. Electrospray ionization (ESI) is a “soft” ionization technique that ionizes polar compounds from aqueous solution prior to injection into a mass spectrometer. The highest resolution and mass accuracy of compounds within NOM have been achieved when ESI is combined with an ultrahigh-resolution mass spectrometer such as the Fourier transform ion cyclotron resonance mass spectrometer (FT-ICR MS). With this technique, individual molecules within a variety of natural organic mixtures can be detected and their elemental composition can be determined. At low mass-to-charge (m/z) ratio, the resolution is high enough to assign exact molecular formulas allowing specific components of these mixtures to be identified. In addition to molecular identification, we can now use ESI FT-ICR MS to examine molecular-level changes in different organic mixtures as a function of relevant geo-processes, such as microbial alterations and photochemistry. Here we present the results from the application of ESI FT-ICR MS to two geochemical questions: (1) the effect of photoirradiation on the molecular composition of fulvic acids and (2) the role of protozoan grazers in the modification of DOM in aquatic systems.     

Phototoxicity of pyrene and benzo[a]pyrene to embryo-larval stages of the Pacific oyster Crassostrea gigas

There is a growing body of evidence to suggest that certain polycyclic aromatic hydrocarbons (PAHs) pose a greater hazard to aquatic organisms than previously demonstrated, due to their potential to cause photo-induced toxicity when exposed to ultraviolet (UV) radiation. The consequences of photo-induced toxicity are reported here for embryo-larval stages of the pacific oyster Crassostrea gigas, following exposure to pyrene and benzo[a]pyrene. During laboratory investigations, significant increases in toxicity were observed in the presence of environmentally attainable levels of UV-radiation, compared with embryos exposed to PAH alone, at levels previously deemed to have little acute biological effect. The phototoxicity of pyrene and benzo[a]pyrene completely inhibited the development to the D-shell larval stage when embryos were simultaneously exposed to 5 microg l(-1) PAH and ultraviolet light (UVB = 6.3 +/- 0.1 microW/cm2 and UVA = 456.2 +/- 55 microW/cm2). A linear relationship was also demonstrated for benzo[a]pyrene phototoxicity with decreasing UV light intensity.     

Temperature fluctuations in the atmospheric surface layer over the thermally inhomogeneous underlying surface

The influence of both spatial and temporal temperature inhomogeneities of the underlying surface on the temperature field in an unstably stratified atmospheric surface layer is considered. The methods of correlation and spectral analyses are proposed to estimate statistical characteristics of surface-air temperature fluctuations caused by both turbulent mixing and inhomogeneities in the temperature of the underlying surface. Analysis of experimental data obtained from measurements in the atmospheric surface layer yields estimates for the contribution made by the time-dependent thermal properties of the underlying surface to the total variance of air-temperature fluctuations. It is shown that the additional air-temperature fluctuations generated by surface-temperature inhomogeneities and unrelated to shear flow may reach 70% and 30% of the total variance of measured fluctuations under variable cloudiness and clear skies, respectively. For the height z = 2 m within the wave-number range 2 × 10^?3 rad m^?1 < k < 0.1 rad m^?1, the contribution made by a spatial surface-temperature inhomogeneity to the variance of air-temperature fluctuations does not exceed 10% of the total variance. Correlation and spectral analyses of experimental data make it possible to isolate the spectra of properly turbulent fluctuations from the measured fluctuations and thus to obtain more accurate values of the universal function of similarity theory for temperature in the range of small wave numbers beyond the inertial range.     

Experimental investigation of forces and geometry of a net cage in uniform flow

A scale model of a flexible circular net with different weights attached to the bottom was tested in a flume tank. Global forces and net deformation were measured for different steady current velocities. Three different sizes of bottom weights were used in the tests. The results from these tests are presented and discussed with the emphasis on the dependency between the forces and the geometry. Comparison is also made to empirical based formulas for calculation of drag and lift forces on net structures. Findings show that i) the forces on, and deformation of a flexible net structure are mutually highly dependent on each other; ii) estimates of global forces on a flexible net structure calculated using simple drag formulas derived from stiff net panel experiments give large errors when compared to experimental measurements; iii) numerical models taking into account the dependency between force and deformation should be used to obtain accurate estimates of forces on flexible net structures; and iv) the forces on a flexible net structure are dependent on Reynolds number, and their dependency are similar to that of a regular cylinder.     

The dynamic behaviour of a river-dominated tidal inlet, River Murray, Australia

Australia's largest river, the River Murray, discharges to the southern ocean through a coastal lagoon and river-dominated tidal inlet. Increased water extractions upstream for irrigation have led to significantly reduced flows at the mouth and, as a result, the area is undergoing rapid change, particularly with regard to the rate at which sediment is being transported into the lagoon. Based on detailed and accurate bathymetric surveys it has been possible to estimate that the rate of lagoon in-filling is of the order of 100,000 m³ per year for the period June 2000 to May 2003, although the actual rate shows significant year to year variability. Dredging of the lagoon commenced in 2000 in an attempt to reverse the trend.In an effort to understand the behaviour of the inlet a one-dimensional numerical model of the inlet has been developed. The model extends the original of van de Kreeke by including a dynamic inlet throat area based on predicted river flows and a sediment transport module to predict the resulting net sediment transport. Comparisons with water level data collected on both the ocean and lagoon sides of the mouth have shown that the model is able to predict the attenuation and lag of the tidal signal reasonably well. The sediment transport model was based on predicted sediment concentrations in the surf zone and was found to predict the rate of sediment in-filling to an acceptable level of accuracy. It is envisaged that the model will be a useful management tool, especially since it is possible to manipulate river discharges to the mouth.     

Impact of urban stormwater runoff on estuarine environmental quality

Urban stormwater runoff could contribute to the deterioration of water quality of a receiving water body. In this research, field studies and laboratory experiments were conducted to assess the microbial contamination resulting from urban stormwater runoff into the Lake Pontchartrain estuary. Fecal coliform, Escherichia coli and enterococci were used as indicator organisms. The specific objectives of the research were to examine the distribution of the indicator organisms in different environmental elements (water column, suspended particles and sediment) and to further investigate the mechanisms related to their fate. Results of the research indicated satisfactory water quality at the study sites during dry weather periods. However, a significant increase was observed in the concentrations of the indicator organisms in the water columns and sediment at specific study sites following a given stormwater event. Three to seven days were needed for the elevated indicator organisms to return back to their background levels in the water column and sediment, respectively. The mechanism of sedimentation contributed to a reduction in the microbial concentration in the water column, as the indicator organisms were found to attach to the suspended particles in the stormwater. The percentage of fecal coliform, E. coli and enterococci attached to the suspended particles was found to be within the range of 9.8–27.5%, 21.8–30.4%, and 8.4–11.5% of the total indicator organisms in the stormwater loaded into the estuary, respectively. About 75–80% of the total indicator organisms remained free-floating for some distance in the water column before dying off.