Geochemical modeling of coal mine drainage, Summit County, Ohio

 Geochemical modeling was used to investigate downstream changes in coal mine drainage at Silver Creek Metro-park, Summit County, Ohio. A simple mixing model identified the components that are undergoing conservative transport (Cl^–, PO₄ ^3–, Ca²⁺, K⁺, Mg²⁺ and Na⁺) and those undergoing reactive transport (DO, HCO₃ ^–, SO₄ ^2–, Fe²⁺, Mn²⁺ and Si). Fe²⁺ is removed by precipitation of amorphous iron-hydroxide. Mn²⁺ are removed along with Fe²⁺ by adsorption onto surfaces of iron-hydroxides. DO increases downstream due to absorption from the atmosphere. The HCO₃ ^– concentration increases downstream as a result of oxidation of organic material. The rate of Fe²⁺ removal from the mine drainage was estimated from the linear relationship between Fe⁺² concentration and downstream distance to be 0.126 mg/s. Results of this study can be used to improve the design of aerobic wetlands used to treat acid mine drainage. Received: 4 June 1996 · Accepted: 17 September 1996     

Ore lead and sulphur isotope pattern from the low-temperature veins of the Catalonian Coastal Ranges (NE Spain)

The lead isotopic composition of galenas from low-temperature veins of the Catalonian Coastal Ranges (NE Spain) displays a small but distinct range of values: 18.318 ≤²⁰⁶Pb/²⁰⁴Pb ≤ 18.678; 15.678 ≤²⁰⁷Pb/²⁰⁴Pb ≤ 15.767 and 38.534 ≤ ²⁰⁸Pb/²⁰⁴Pb ≤ 39.189. The data define a linear trend in the ²⁰⁸Pb/²⁰⁴Pb versus ²⁰⁶Pb/²⁰⁴Pb diagram that can be interpreted in terms of mixing of lead from different reservoirs. The lead appears to be derived from a solution that preferentially leached granites of Late-Hercynian age. Sulphur isotopic compositions of the galenas range from −8.5 to + 7.3‰ but variations in a single deposit are small (1–2‰), pointing to different sources of sulphur. In a δ³⁴S versus ²⁰⁶Pb/²⁰⁴Pb plot no clear correlation trends appear. Lead isotope data from deposits of similar characteristics situated within the Hercynian orogenic belt as the Linares-La Carolina district (S Spain) and the Inglesiente-Sulcis area (Sardinia) show slight differences indicating a source area of similar lead isotopic composition. In the CCR and Linares-La Carolina districts, the main source of lead is related to the Hercynian granites of each area, although small contributions from metasediments cannot be ruled out. The contribution of lead from metasedimentary rocks is particularly seen in the Sardinian (Hercynian vein-type) ores. Received: 8 August 1996 / Accepted: 5 December 1996     

Assessing rapid environmental change using geoindicators

 Geoindicators are high-resolution measures of short-term (<100 years) surface or near-surface changes in earth processes, and phenomena that are significant for environmental monitoring and assessment. They are based on standard concepts and procedures and can be used to track changes in fluvial, coastal, desert, mountain, permafrost and other terrestrial areas. Geoindicators assess both catastrophic events and those that are more gradual, but evident within a human lifespan. Most deal with changes on the landscape (0.1–10 km) and meso-scales (10–100 km), but some, such as relative sea level and volcanic unrest, have regional and global dimensions. Some are complex and costly to measure, others are relatively simple and easy to apply. Geoindicators can also be used to unravel trends over the past few centuries and longer through paleoenvironmental research, thus providing the important baselines against which human-induced and natural stresses can be better understood. Geoindicators have been designed by the International Union of Geological Sciences as an aid to state-of-the-environment reporting and long-term ecological monitoring. Received: 26 July 1996 / Accepted: 1 November 1996     

Texture and mineralogy of sediments from the Ganges-Brahmaputra-Meghna river system in the Bengal Basin, Bangladesh and their environmental implications

 The Bengal basin, Bangladesh, represents one of the most densely populated recent floodplains of the world. The sediment flux through the basin is one of the highest on a global scale. A significant portion of this sediment load find its sink in the basin itself because of its lower elevation and frequent flooding. The textural, mineralogical and chemical nature of the sediments thus have an important bearing on the environmental quality of the basin as well as for the Bay of Bengal. The sediment load of the Ganges-Brahmaputra-Meghna (GBM) river system consists exclusively of fine sand, silt and clay at their lower reaches within the Bengal basin, Bangladesh, and is deposited under uniformly fluctuating, unidirectional energy conditions. The sediments have a close simitarity in grain size with the sediments of the surrounding floodplain. The mineral assemblage is dominated by quartz and feldspars. Illite and kaolinite are the major clay minerals, and occur in almost equal proportion in bed sediments. The heavy mineral assemblage is dominated by unstable minerals which are mostly derived from high-rank metamorphic rocks. The characteristic smaller grain-size, i.e. having large surface-to-mass ratios, and the mineralogy of sediments suggests that they are susceptible to large chemical adsorptive reactions and thus could serve as a potential trap for contaminants. However, the sediments of the GBM river system in the Bengal basin, Bangladesh, shows lower concentration of Pb, Hg and As, and a marginally higher value for Cd as compared to that of standard shale. Considering population density and extensive agricultural practice in the basin, the sediments can in the long run become contaminated. Received: 9 November 1994 · Accepted: 18 June 1996     

Effects of geology and human activity on the dynamics of salt-water intrusion in three coastal aquifers in southern Spain

 Mathematical modelling of salt-water intrusion processes in three aquifers on the southern coast of Spain (Río Verde, Río Vélez and Castell de Ferro) reveals that, although all three systems are subject to the same climate and seasonal over-exploitation, geological and human factors have very different effects on the dynamics of contamination. In the Río Verde aquifer, the most important influence is the high volume of extractions occurring during the dry season; in Río Vélez, the intrusion is strongly controlled by infiltration of water from the river to the aquifer, and, in the Castell de Ferro system, an intensely karstified carbonate massif lying in contact with both the sea water and the detrital aquifer represents the main entrance point for influx of sea water and subsequent washing of the aquifer. We have undertaken a mathematical simulation of various possible measures to counteract intrusion, according to the specific characteristics of the process in each aquifer. These measures include artificial recharge, use of natural recharge from the river as a hydraulic barrier, and the construction of a low-permeability barrier. Received: 5 December 1995 · Accepted: 12 April 1996     

The separation of the influence of nutrients and climate on the varve time-series of baldeggersee, Switzerland

The varve data-set from a freeze-core taken in the deepest part of Baldeggersee was subjected to different multivariate statistical analyses in order to estimate the amount of variance in the varve thickness measures explicable by past climate and by the trophic state of the lake. A comparison of two different time-periods (1902 to1992 versus 1920 to 1980) revealed that the lake restoration programme since 1982 has had a significant impact on the formation of the seasonal layers. Results of the partitioning of the variance in the varve thickness measures showed that about two thirds of the variance are unexplained by a climate and trophic state model and that trophic state explains 6%, whereas climate accounts for about 28% of the variance before the effect of lake restoration had a strong impact on the varves. Among the climate parameters the amount of annual precipitation is a strong predictor for explaining the thickness of both dark layer and total couplet thickness, whereas summer precipitation is important for the thickness of the light layer.     

Synthetic Seismograms for a Layered Earth Geological Model Using the Absorption and Dispersion Phenomena

—An algorithm has been developed to compute the dispersive and dissipative seismic response using FUTTERMAN’S (1962) third attenuation-dispersion relationship. In the computation, frequency-dependent velocity and quality factor Q have been used but in the case of the nondispersive synthetic seismogram, frequency-independent velocity has been used. The model’s parameters are density, phase velocity, quality factors and thicknesses of the layers. Dispersive and nondispersive synthetic seismograms have been computed with and without absorption for a layered earth geological model. Fast Fourier transform (FFT) technique has been adopted for converting the frequency domain response into the time domain. The frequency spacing, Δf = 0.976?Hz, has been considered to avoid the aliasing effect. The results have revealed changes in the reflected waveforms in the frequency domain as well as in the time domain for absorption and dispersion cases. It is also concluded that dispersion reduces the arrival time and this effect is increasing with the travel time. The effect of constant Q on the seismic response has also been studied.