Measurement of stress effects (scope for growth) and contaminant levels in mussels (Mytilus edulis) collected from the Irish Sea

The objective of this research was to quantify the impact of pollution along the coastlines of the Irish Sea. Pollution assessment was based on the combined measurement of scope for growth (SFG), and chemical contaminants in the tissues of mussels (Mytilus edulis) collected from 38 coastal sites around the Irish Sea during June-July in 1996 and 1997. On the UK mainland coast, the SFG showed a general trend with a significant decline in water quality in the Liverpool and Morecambe Bay region. High water quality was recorded along the west coast of Wales, as well as southwest England and northwest Scotland (clean reference sites outside the Irish Sea). Along the coast of Ireland there was a similar trend with reduced SFG within the Irish Sea region. SFG was generally low north of Duncannon and then improved north of Belfast. The poor water quality on both sides of the Irish Sea is consistent with the prevailing hydrodynamics and the spatial distribution of contaminants associated with urban/ industrial development. The decline in SFG of mussels on both sides of the Irish Sea was associated with a general increase in contaminant levels in the mussels. Certain contaminants, including PAHs, TBT, sigmaDDT, Dieldrin, gamma-HCH, PCBs, and a few of the metals (Cd, Se, Ag, Pb), showed elevated concentrations. Many of these contaminants were particularly elevated in the coastal margins of Liverpool Bay, Morecambe Bay and Dublin Bay. A quantitative toxicological interpretation (QTI) of the combined tissue residue chemistry and SFG measurements indicated that at the majority of coastal sites, c. 50 to > 80% of the observed decline in SFG was due to PAHs as a result of fossil fuel combustion and oil spills. TBT levels were highest at major ports and harbours, but these concentrations only made a minor contribution to the overall reduction in SFG. At no sites were individual metals accumulated to concentrations that could cause a significant effect on SFG. The study identified many sites where the observed reduction in SFG was far greater than predicted from the limited number of chemical contaminants analysed, thus indicating the presence of additional 'unknown toxicants'. Sewage (containing domestic, agricultural and industrial components) appears to be an important contributor to reduced SFG and linear alkylbenzenes (LABs) and As may provide suitable 'sewage markers'. There was a highly significant positive correlation between SFG and As (P < 0.001). This relationship may be due to reduced As uptake by algal food material and mussels at sites with elevated P04 concentrations (e.g. at sites with sewage inputs). Phosphate is a known competitive inhibitor of As accumulation, at least in algae. The results highlight that further research is required on 'sewage markers' in mussels. The SFG approach therefore provides a rapid, cost-effective and quantitative measure of pollution impact, as well as a means of identifying the causes through a QTI of tissue contaminants levels. It also serves to identify the presence of unidentified toxicants and areas that require further study.     

Anthropogenic trace metals in sediment and settling particulate matter on a high-energy continental shelf (Sydney,Australia)

The anthropogenic contribution of trace metals to settling particulate matter (SPM) and surficial sediments was determined on the high-energy continental shelf adjacent to Sydney, Australia. Settling particulate matter and surficial sediment was collected in the vicinity of a major sewage outfall and at five control sites on the middle shelf (80-100 m water depth). Sediment traps were deployed on 10 occasions for up to 2 weeks during the summer and winter of 1995 and SPM was analyzed for Ag, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn. Cobalt, Fe, Mn and Ni act conservatively in SPM and in sediments regionally and are used as normalizing elements to determine anthropogenic enrichment. Surficial sediments and SPM are enriched in Ag, Cr, Cu, Pb and Zn near a major ocean outfall and at four of the five control sites, although sewage particles contribute < 5% of trace metals in the total sample. Silver is the most sensitive trace metal tracer for establishing the presence of sewage particulate matter. Sewage particulate matter flux near the outfall was estimated using a two end-member mixing model and is below 0.5 g m(-2) day(-1) during all deployment periods. The mean sewage particulate matter flux at sampling locations 30 km and 60 km north of the outfall are <0.13 g m(-2) day(-1) and <0.01 g m(-2) day(-1), respectively, indicating an efficient dispersal of anthropogenic material on this high energy continental shelf.     

Modelling of the ecosystem of the Black-Sea shelf zone near the estuary of the Danube

We analyze the results of numerical calculations performed according to the three-dimensional interdisciplinary model of an ecological system of the Black-Sea shelf zone near the estuary of the Danube. The complete system of equations of hydrothermodynamics is solved together with transport equations of the advection-diffusion-reaction type used to describe the transformation of a substance (nitrogen) between the components of the characteristic vectors of the ecosystem: plankton, detritus, and biogenic elements (nitrates). We describe the distinctive features of the circumcontinental distribution of components obtained as a result of numerical experiments and present arguments for the conclusion that the ecosystem of the Danube estuary water area plays the role of a buffer zone between the press of the Danubian biogenic pollutions and the neighbouring areas of the shelf zone and open sea. Translated by Peter V. Malyshev and Dmitry V. Malyshev     

Generation of internal waves in the sea by local perturbations of wind and density flows on the surface

On the basis of a nonlinear model taking into account viscosity, density diffusion, and currents, we perform the numerical analysis of propagation of perturbations formed in the abyssal part of the Black Sea as a result of the action of tangential wind stresses or density flows in the form of a strip on the sea surface. It is shown that, in the course of time, in the region of the bottom slope, these perturbations generate a train of waves in the sea, which causes oscillations of the fields of density and currents. There are some differences between the generation of internal waves by the flows of density and the wind. Unlike the wind action, in the presence of flows of density in the upper layer in the region of the strip, the initial period of generation is characterized by the formation of intense perturbations without train structure. Translated by Peter V. Malyshev and Dmitry V. Malyshev     

Seasonally Hypersaline Estuaries in Mediterranean-climate Regions

Data collected in three Californian estuaries indicate that hypersaline conditions exist during the dry summers typical of a Mediterranean climate. The generalised seasonal and longitudinal hydrographic structures are described and explained. It is argued that this seasonal hypersalinity is common and that it represents a major class of estuaries. The observed accumulation of salt indicates surprisingly long residence times in small basins which have free exchange with the ocean. This semi-isolation of the inner basin leads to a large build-up or severe depletion of nutrients, pollutants and plankton in these systems. Of concern are the trends to increase pollutant loading in the same systems that are experiencing an increase in residence times owing to freshwater extraction in the watershed.     

Dynamics of a moored barge under regular and random waves

Developments in the study of wave forces and construction techniques in deep water by the offshore oil industry have increased the use of marine terminals at deep water locations. A thorough understanding of moored ship dynamics when subjected to waves, wind and current combined with the use of flexible mooring lines would help to design berthing terminals for exposed areas. In this paper, the three dimensional problem of wave interactions with a barge moored to a single point is dealt with, based on the finite element method. The effect of flexibility of the mooring line and the point of mooring on the response of the barge as well as the mooring line tension is investigated. The paper compares the numerical results with model tests carried out on a barge moored to a fixed support under regular and random waves in head sea. The effect of stiffness of the mooring line on the barge response for different mooring points is discussed, which would be useful for the designers. The effect of viscous damping is also considered. The analytical results are in good agreement with the experimental results in both regular and random waves.     

A unified, polynomial approach for the approximate solution of thermoelastic problems in rectangular plates

The present paper, of a tutorial nature, solves two different thermoelastic problems using a unified approach: (a) thermoelastic stresses and deflections in thin, rectangular plates with edges elastically restrained against rotation when small-deflection theory is used and stress resultants in the middle plane of the plates are neglected; and (b) thermoelastic plane stress situations in rectangular plates with stress-free edges subjected to a two-dimensional temperature distribution.The first problem is attacked using polynomial coordinate functions which identically satisfy the governing boundary conditions, and the Ritz method is used to determine the plate response. When the flexibility coefficients approach zero (clamped edge conditions) the calculated results practically coincide with the exact solution for the test case treated in this paper. On the other hand this degenerate solution turns out to be a very convenient approximation for obtaining a solution to Airy's problem described in the second place and which is also solved in a straightforward manner using a variational approach.     

About the relationship between acoustic fields and hydrological fields in the area of a mesoscale eddy in the Black Sea

This paper discusses the application of acoustic sounding with the purpose of identifying vortical features in the sea. Analysis of the results of a multidisciplinary acoustic/hydrological experiment conducted in the Black Sea has revealed a stable recurrent correlation between the amplitudinal variance of echo signals, on the one hand, and the peculiarities of water temperature fields, on the other. Given these characteristics, the peripheral and the central areas of a mesoscale eddy essentially differed. This allows us to apply acoustic sounding to identify mesoscale eddies in the sea. Translated by Vladimir A. Puchkin.     

Spatial and temporal variability of crustal magnetization of a slowly spreading ridge: Mid-Atlantic Ridge (20°–24° N)

The results of the two- and three-dimensional magnetic inversions performed on data located between 20°–24° N on the Mid-Atlantic Ridge indicate the crustal magnetization has decayed exponentially for the last 10 Ma, and that this decay has been fairly symmetric about the ridge axis. After removal of the mean temporal decay, the residual field is characterized by more positive magnetizations at the second-order discontinuities, regardless of initial magnetization direction. A model that involves the preferential emplacement of serpentinized lithologies near the discontinuities is proposed to explain this correlation. The temporal detrending method also indicates that several ridge-parallel depressions located on the flanks of the ridge axis are regions of more positive magnetizations. These bathymetric depressions may mark the locations of detachment faulting that occurred during amagmatic periods of extension. The general symmetry of the crustal magnetization about the ridge axis does not support the occurrence of continuous detachment faulting proposed to correspond to the inner and outer corners of ridge axis discontinuities.