Estimation of infiltration rate,run-off and sediment yield under simulated rainfall experiments in upper Pravara Basin,India: Effect of slope angle and grass-cover

The main objective of this study is to measure the effect of slope and grass-cover on infiltration rate, run-off and sediment yield under simulated rainfall conditions in a badland area located in the upper Pravara Basin in western India. An automatic rainfall simulator was designed following Dunne et al (1980) and considering the local conditions. Experiments were conducted on six selected experimental fields of 2 × 2m within the catchment with distinct variations in surface characteristics — grass-covered area with gentle slope, recently ploughed gently sloping area, area covered by crop residue (moderate slope), bare badland with steep slope, gravelly surface with near flat slope and steep slope with grass-cover. The results indicate subtle to noteworthy variations amongst the plots depending on their slope angle and surface characteristics. An important finding that emerges from the study is that the grass-cover is the most effective measure in inducing infiltration and in turn minimizing run-off and sediment yield. Sediment yields are lowest in gently sloping grass-covered surfaces and highest in bare badland surfaces with steep slopes. These findings have enormous implication for this area, because over 2/3 area is characterized by bare and steep slopes.     

Late Permian non-marine–marine transitional profiles in the central Southern Permian Basin, northern Germany

The transition from Rotliegend to Zechstein within the Southern Permian Basin is one from continental desert to a marine environment. During the Upper Rotliegend II a huge playa lake existed there. This lake was temporarily influenced by precursors of the Zechstein transgression. Therefore the mega-playa evolved into a sabkha system. One of these early marine ingressions is known from an outcrop in Schleswig-Holstein. Laminated silt- and claystones, deposited within a standing water body, are intercalated in siltstones of a salt-flat environment. The lake sediments are characterised by high frequency cyclicity, shown by the sedimentary record and also by palaeontological data. The section contains fresh water as well as brackish-marine and marine fauna. Climatically forced cycles interact with marine incursions. After the Zechstein transgression had flooded the basin completely, sedimentation was controlled by sea-level fluctuations. Two sections, in the southern North Sea and in Schleswig-Holstein, are presented in this paper. Cyclicities with different frequencies controlled the sedimentation of the Kupferschiefer (T1) and the Werra Carbonate (Ca1). Sediments of the North Sea sequence were deposited within a shallow bay at the margin of an elevation. Therefore, the high frequency cyclicity became obvious within the sedimentary patterns and in the faunal content.     

Progress in the Gondwanan Carboniferous–Permian palynology and correlation of the Nilawahan Group of the Salt Range,Pakistan: A brief review

This paper comprises of two sections. The first section describes challenges in the Carboniferous–Permian Gondwanan stratigraphic palynology, and progress in techniques such as presence of the ‘rare-marine intervals’, and ‘radiometric dating’ in some Gondwanan successions, e.g., South Africa, Australia and South America, as tools to confidently calibrate these palynozones. The second section describes developments in the palynological work on the Carboniferous–Permian Nilawahan Group of the Salt Range, Pakistan, and summarises their correlation with the coeval succession of the Gondwana continents and with the Russian/International stages.     

City of Bingöl in May 2003: Assessment of strong ground motion records

The main shock of Bingöl earthquake (M _W = 6.4) recorded by six accelerometers in the area occurred at 03:27 local time on May 1, 2003. The largest acceleration value of north–south component was recorded as 545.5 cm/s² at the nearest station which it is 12 km away from the epicenter of earthquake. Especially, 0.15 s short period was observed when high spectral acceleration value occurred. An acceleration value greater than 50 gal was recorded at the BNG (Bingöl) station and structural damage occurred within 6.5 s was very important for the near source and strong ground motion seismology. The recorded peak acceleration values were greater than the estimated empirical acceleration values. However, the structural damage was not as high and widespread as expected. This occurrence was explained by considering the factors of earthquake source, frequency content, effective duration, effective acceleration value, local soil conditions, rupture direction and attenuation.     

Evaluation of RTK-GPS and Total Station for applications in land surveying

Accuracies of Real-Time Kinematic Global Positioning (RTK-GPS) system and Total Station (TS) were investigated in GIS environment. In geostatistical evaluations, Kriging method was used with spherical, exponential, and Gaussian models. The survey results demonstrated that an area of 3.5 ha or smaller can be best explained with Gaussian model, while the larger areas require a spherical model. A vertical error of 60 cm and a horizontal error of 30 cm can be observed when the survey points outside the construction area are eliminated. The optimum area per survey point was calculated to be 20×20 m² to increase the accuracy. This case study showed that an inaccurate survey can result cost over estimations up to 27%.     

Pore‐scale modeling of surface erosion in a particle bed

A fully coupled transient two‐dimensional model was employed to study fundamentals of flood‐induced surface erosion in a particle bed. The interaction of the liquid and solid phases is the key mechanism related to surface erosion. The solid phase was idealized at a particle scale by using the discrete element method. The fluid phase was modeled at a mesoscale level and solved using the lattice Boltzmann method. The fluid forces applied on the particles were calculated on the basis of the momentum the fluid exchanges with the particle. The proposed approach was used to model both single particles and particle beds subjected to Couette flow conditions. The behavior of both the single particle and the particle bed depended on particle diameter and surface shear fluid velocity. The conducted simulations show that the fluid flow profile penetrates the bed for a small distance. This penetration initiates sheet‐flow and surface erosion as the fluid interacts with particles. The effect of suppressing particle rotation on the fluid‐induced forces on the particle was also examined. Suppressing particle spinning may lead to underestimated erosion rate. Results of fluid and particle velocities were compared against experimental results and appeared to agree with the observed trends.Copyright © 2013 John Wiley & Sons, Ltd.     

Petrogenesis of metatexite and diatexite migmatites determined using zircon U–Pb age,trace element and Hf isotope data,Higo metamorphic terrane,central Kyushu,Japan

Metatexite and diatexite migmatites are widely distributed within the upper amphibolite and granulite facies zones of the Higo low‐P/high‐T metamorphic terrane. Here, we report data from an outcrop in the highest grade part of the granulite facies zone, in which diatexite occurs as a 3 m thick layer between 2 m thick layers of stromatic‐structured metatexite within pelitic gneiss. The migmatites and gneiss contain the same peak mineral assemblage of biotite + plagioclase + quartz + garnet + K‐feldspar with retrograde chlorite ± muscovite and some accessory minerals of ilmenite ± rutile ± titanite + apatite + zircon + monazite ± pyrite ± zinc sulphide ± calcite. Calculated metamorphic P–T conditions are 800–900 °C and 9–12 kbar. Zircon in the diatexite forms elongate euhedral crystals with oscillatory zoning, but no core–rim structure. Zircon from the gneiss and metatexite forms euhedral–subhedral grains comprising inherited cores overgrown by thin rims. The overgrowth rims in the metatexite have lower Th/U ratios than zircon in the diatexite and yield a ²⁰⁶Pb/²³⁸U age of 116.0 ± 1.6 Ma, which is older than the 110.1 ± 0.6 Ma ²⁰⁶Pb/²³⁸U age derived from zircon in the diatexite. Zircon from the diatexite has variable REE contents with convex upward patterns and flat normalized HREE, whereas the overgrowth rims in the metatexite and gneiss have steep HREE‐enriched patterns; however, both types have similar positive Ce and negative Eu anomalies. ¹⁷⁶Hf/¹⁷⁷Hf ratios in the overgrowth rims from the metatexite are more variable and generally lower than values from zircon in the diatexite. Based on U–Pb ages, trace element and Hf isotope data, the zircon rims in the metatexite are interpreted to have crystallized from a locally derived melt, following partial dissolution of inherited protolith zircon during anatexis, whereas the zircon in the diatexite is interpreted to have crystallized from a melt that included an externally derived component. By integrating zircon and petrographic data for the migmatites and pelitic gneiss, the metatexite migmatite is interpreted to have formed by in situ partial melting in which the melt did not migrate from the source, whereas the diatexite migmatite included an externally derived juvenile component. The Cretaceous high‐temperature metamorphism of the Higo metamorphic terrane is interpreted to reflect emplacement of mantle‐derived basalts under a volcanic arc along the eastern margin of the Eurasian continent and advection of heat via hybrid silicic melts from the lower crust. Post‐peak crystallization of anatectic melts in a high‐T region at mid‐crustal depths occurred in the interval c. 116–110 Ma, as indicated by the difference in zircon ages from the metatexite and diatexite migmatites.     

Thermal evolution of the Tseel terrane,SW Mongolia and its relation to granitoid intrusions in the Central Asian Orogenic Belt

The timing and thermal effects of granitoid intrusions into accreted sedimentary rocks are important for understanding the growth process of continental crust. In this study, the petrology and geochronology of pelitic gneisses in the Tseel area of the Tseel terrane, SW Mongolia, are examined to understand the relationship between igneous activity and metamorphism during crustal evolution in the Central Asian Orogenic Belt (CAOB). Four mineral zones are recognized on the basis of progressive changes in the mineral assemblages in the pelitic gneisses, namely: the garnet, staurolite, sillimanite and cordierite zones. The gneisses with high metamorphic grades (i.e. sillimanite and cordierite zones) occur in the central part of the Tseel area, where granitoids are abundant. To the north and south of these granitoids, the metamorphic grade shows a gradual decrease. The composition of garnet in the pelitic gneisses varies systematically across the mineral zones, from grossular‐rich garnet in the garnet zone to zoned garnet with grossular‐rich cores and pyrope‐rich rims in the staurolite zone, and pyrope‐rich garnet in the sillimanite and cordierite zones. Thermobarometric analyses of individual garnet crystals reveal two main stages of metamorphism: (i) a high‐P and low‐T stage (as recorded by garnet in the garnet zone and garnet cores in the staurolite zone) at 520–580 °C and 4.5–7 kbar in the kyanite stability field and (ii) a low‐P and high‐T stage (garnet rims in the staurolite zone and garnet in the sillimanite and cordierite zones) at 570–680 °C and 3.0–6.0 kbar in the sillimanite stability field. The earlier high‐P metamorphism resulted in the growth of kyanite in quartz veins within the staurolite and sillimanite zones. The U–Pb zircon ages of pelitic gneisses and granitoids reveal that (i) the protolith (igneous) age of the pelitic gneisses is c. 510 Ma; (ii) the low‐P and high‐T metamorphism occurred at 377 ± 30 Ma; and (iii) this metamorphic stage was coeval with granitoid intrusion at 385 ± 7 Ma. The age of the earlier low‐T and high‐P metamorphism is not clearly recorded in the zircon, but probably corresponds to small age peaks at 450–400 Ma. The low‐P and high‐T metamorphism continued for c. 100 Ma, which is longer than the active period of a single granitoid body. These findings indicate that an elevation of geotherm and a transition from high‐P and low‐T to low‐P and high‐T metamorphism occurred, associated with continuous emplacement of several granitoids, during the crustal evolution in the Devonian CAOB.     

Petroleum inclusions and residual oils: constraints for deciphering petroleum migration

The analysis of petroleum inclusions (PI) in parallel to residual oils (=bitumens) provided specific constraints for petroleum migration processes in the Prague Basin. Whereas organic geochemical information from bitumens is limited due to alteration, additional high quality information was obtained from C_1–14-range compounds inside crystals. This was obtained by the application of a closed system for the decrepitation and thermal extraction of PI with subsequent gas chromatography (GC) and gas chromatography–mass spectrometry (GC–MS). The resulting data not only show pristine live oils, gases, residual and precipitated bitumens and a broad variation of mixtures of the groups above, but also show that gas migration and fractionation processes played a major role in the Prague Basin.     

Anomalous fluid emission of a deep borehole in a seismically active area of Northern Apennines (Italy)

The Miano borehole, 1047 m deep, is located close to the river Parma in the Northern Apennines, Italy. A measuring station has been installed to observe the discharge of fluids continuously since November 2004. The upwelling fluid of this artesian well is a mixture of thermal water and CH₄ as main components. In non-seismogenic areas, a relatively constant fluid emission would be expected, perhaps overlaid with long term variations from that kind of deep reservoir over time. However, the continuous record of the fluid emission, in particular the water discharge, the gas flow rate and the water temperature, show periods of stable values interrupted by anomalous periods of fluctuations in the recorded parameters. The anomalous variations of these parameters are of low amplitude in comparison to the total values but significant in their long-term trend. Meteorological effects due to rain and barometric pressure were not detected in recorded data probably due to reservoir depth and relatively high reservoir overpressure. Influences due to the ambient temperature after the discharge were evaluated by statistical analysis. Our results suggest that recorded changes in fluid emission parameters can be interpreted as a mixing process of different fluid components at depth by variations in pore pressure as a result of seismogenic stress variation. Local seismicity was analyzed in comparison to the fluid physico-chemical data. The analysis supports the idea that an influence on fluid transport conditions due to geodynamic processes exists. Water temperature data show frequent anomalies probably connected with possible precursory phenomena of local seismic events.