Growth, annealing and recrystallization of zircon and preservation of monazite in high-grade metamorphism: conventional and in-situ U-Pb isotope, cathodoluminescence and microchemical evidence

Zircon and monazite from granulite- to amphibolite-facies rocks of the Vosges mountains (central Variscan Belt, eastern France) were dated by ion-microprobe and conventional U-Pb techniques. Different granulites of igneous (so-called leptynites) and sedimentary origin (kinzigites) and their leucosomes were dated at 334.9 ± 3.6, 335.4 ± 3.6 and 336.7 ± 3.5 Ma (conventional age 335.4 ± 0.6 Ma). Subsequent growth stages of zircon were distinguished by secondary electron (SEM) and cathodoluminescence (CL) imaging: (1) subsolidus growth producing round anhedral morphologies and sector zoning; (2) appearance of an intergranular fluid or melt phase at incipient dehydration melting that first resulted in resorption of pre-existing zircons, followed by growth of acicular zircons or overgrowths on round zircons consisting of planar growth zoning; (3) advanced melting producing euhedral prismatic zircons with oscillatory zoning overgrowing the sector zones. Two further lithologies, the Kaysersberg granite and the Trois-Epis units, were both formerly considered as migmatites. The intrusion of the Kaysersberg granite was dated at 325.8 ± 4.8 Ma. The Trois-Epis unit was found to be the product of volume recrystallization of a former granulite, which occurred under amphibolite-facies conditions 327.9 ± 4.4 Ma ago. The amphibolite-facies overprint of the Trois-Epis zircons led to the complete rejuvenation of most of the zircon domains by annealing and replacement/recrystallization processes. Annealing is assumed to occur in strained lattice domains, which are possibly disturbed by high trace element contents and/or large differences in decay damage between adjacent growth zones. Investigation of cathodoluminescence structures reveals that the replacement occurs along curved chemical reaction fronts that proceed from the surface towards the interior of the zircon. The monazite U-Pb system still records the age of high-grade metamorphism at around 335 Ma. The chemical reagent responsible for the rejuvenation of zircon obviously left the monazite unaffected. Received: 19 February 1998 / Accepted: 19 October 1998     

Potential of marble dust to stabilise red tropical soils for road construction

The potential of marble dust as a stabilizing additive to red tropical soils was evaluated. The evaluation involved the determination of the geotechnical properties of three different red tropical soils in their natural state as well as when mixed with varying proportions of marble dust. The parameters tested included the particle size distribution, specific gravity, Atterberg limits, the standard compaction characteristics, the compressive strength and the California bearing ratio (CBR). The strength tests were repeated after normal 28 day curing of the treated samples and also after accelerated 24 h curing at temperatures of 40°C, 60°C and 80°C.

Results showed that the geotechnical parameters of red tropical soils are improved substantially by the addition of marble dust; plasticity was reduced by 20 to 33% and strength and CBR increased by 30 to 46% and 27 to 55% respectively. The highest strength and CBR values were achieved at 8% marble dust. Results also showed that normal 28 day curing improved the strength of the marble dust-treated soil with over 80% strength gain achieved after 7 to 10 days of normal curing. Higher strength development was realised following accelerated 24 h curing at 60°C.

Although these results imply marked improvement in the geotechnical parameters of red tropical soils, the higher strength developed is not enough for the improved soil to be used as a base material in the construction of heavily trafficked flexible pavements. The improved material may, however, be successfully used as base material for lightly trafficked roads and as a sub-base material for heavily trafficked roads.     

An infrared spectroscopic and single-crystal X-ray study of malayaite, CaSnSiO5

Powder infrared spectroscopy and X-ray diffraction techniques on single crystals were used to study the thermal behaviour of malayaite, CaSnSiO₅. Infrared spectra show a discontinuity in the temperature evolution of phonon frequencies and absorbance near 500 K. However, crystal structure data collected at 300, 450, 550, 670, and 750 K show no evidence of a symmetry-breaking phase transition and no split positions. The most obvious change with heating is a tumbling motion of the SnO₆ octahedra and an increase of the anisotropic displacement factors of Ca. The thermal evolution of the mean-square vibrational amplitude of the Ca atom shows a pronounced change in slope near 500 K. The evidence suggests that the 500 K anomaly in malayaite is more similar in character to the 825 K (β-γ) transition as opposed to the 496 K (α-β) transition in synthetic titanite. Received: 26 March 1998 / Revised, accepted: 23 December 1998     

Radiative forcing by contrails

A parametric study of the instantaneous radiative impact of contrails is presented using three different radiative transfer models for a series of model atmospheres and cloud parameters. Contrails are treated as geometrically and optically thin plane parallel homogeneous cirrus layers in a static atmosphere. The ice water content is varied as a function of ambient temperature. The model atmospheres include tropical, mid-latitude, and subarctic summer and winter atmospheres. Optically thin contrails cause a positive net forcing at top of the atmosphere. At the surface the radiative forcing is negative during daytime. The forcing increases with the optical depth and the amount of contrail cover. At the top of the atmosphere, a mean contrail cover of 0.1% with average optical depth of 0.2 to 0.5 causes about 0.01 to 0.03 Wm⁻² daily mean instantaneous radiative forcing. Contrails cool the surface during the day and heat the surface during the night, and hence reduce the daily temperature amplitude. The net effect depends strongly on the daily variation of contrail cloud cover. The indirect radiative forcing due to particle changes in natural cirrus clouds may be of the same magnitude as the direct one due to additional cover.     

Pc3 pulsations during variable IMF conditions

Pc3 geomagnetic field fluctuations detected at low latitude (L’Aquila, Italy) during the passage of a high velocity solar wind stream, characterized by variable interplanetary magnetic field conditions, are analyzed. Higher frequency resonant fluctuations and lower frequency phenomena are simultaneously observed; the intermittent appearance and the variable frequency of the longer period modes can be well interpreted in terms of the variable IMF elements; moreover their polarization characteristics are consistent with an origin related to external waves propagating in antisunward direction. A comparison with simultaneous observations performed at Terra Nova Bay (Antarctica) provides additional evidence for a clear relationship between the IMF and Pc3 pulsations also at very high latitudes.     

Lead isotopes of the carbonate-hosted Kabwe, Tsumeb, and Kipushi Pb-Zn-Cu sulphide deposits in relation to Pan African orogenesis in the Damaran-Lufilian Fold Belt of Central Africa

Lead isotope ratios of galena from the carbonate-hosted massive sulphide deposits of Kabwe (Pb-Zn) and Tsumeb (Pb-Zn-Cu) in Zambia and Namibia, respectively, have been measured and found to be homogeneous and characteristic of upper crustal source rocks. Kabwe galena has average isotope ratios of ^206/204Pb = 17.997 ± 0.007, ^207/204Pb = 15.713 ± 0.010 and ^208/204Pb = 38.410 ± 0.033. Tsumeb galena has slightly higher ^206/204Pb (18.112 ± 0.035) and slightly lower ^207/204Pb (15.674 ± 0.016) and ^208/204Pb (38.276 ± 0.073) ratios than Kabwe galena. The isotopic differences are attributed to local differences in the age and composition of the respective source rocks for Kabwe and Tsumeb. The homogeneity of the ore lead in the two epigenetic deposits suggests lead sources of uniform isotopic composition or, alternatively, thorough mixing of lead derived from sources with relatively similar isotopic compositions. Both deposits have relatively high ²³⁸U/²⁰⁴Pb ratios of 10.31 and 10.09 for Kabwe and Tsumeb galenas, respectively. These isotope ratios are considered to be typical of the upper continental crust in the Damaran-Lufilian orogenic belt, as also indicated by basement rocks and Cu-Co sulphides in stratiform Katangan metasediments which have a mean μ-value of 10.25 ± 0.12 in the Copperbelt region of Zambia and the Democratic Republic of Congo (formerly Zaire). The ²³²Th/²⁰⁴Pb isotope ratios of 43.08 and 40.42 for Kabwe and Tsumeb suggest Th-enriched source regions with ²³²Th/²³⁵U (κ-values) of 4.18 and 4.01, respectively. Model isotopic ages determined for the Kabwe (680 Ma) and Tsumeb (530 Ma) deposits indicate that the timing of the mineralisation was probably related to phases of orogenic activity associated with the Pan-African Lufilian and Damaran orogenies, respectively. Galena from the carbonate-hosted Kipushi Cu-Pb-Zn massive sulphide deposit in the Congo also has homogeneous lead isotope ratios, but its isotopic composition is comparable to that of the average global lead evolution curve for conformable massive sulphide deposits. The μ (9.84) and κ (3.69) values indicate a significant mantle component, and the isotopic age of the Kipushi deposit (456 Ma) suggests that the emplacement of the mineralisation was related to a post-tectonic phase of igneous activity in the Lufilian belt. The isotope ratios (^206/204Pb, ^207/204Pb, ^208/204Pb) of the three deposits are markedly different from the heterogeneous lead ratios of the Katangan Cu-Co stratiform mineralisation of the Copperbelt as well as those of the volcanogenic Nampundwe massive pyrite deposit in the Zambezi belt which typically define radiogenic linear trends on lead-lead plots. The host-rock dolomite of the Kabwe deposit also has homogeneous lead isotope ratios identical to the ore galena. This observation indicates contamination of the Kabwe Dolomite Formation with ore lead during mineralisation. Received: 8 September 1997 / Accepted: 21 August 1998     

Geochemical fractionation and ecological risks assessment of benthic sediment-bound heavy metals from coastal ecosystems off the Equatorial Atlantic Ocean

This study determines the pollution, fractionation, and ecological risks of sediment-bound heavy metals from coastal ecosystems off the Equatorial Atlantic Ocean. Contamination Factor(CF), pollution load index(PLI), and geoaccumulation index(Igeo) were used to assess the extent of the heavy metal pollution, while the potential ecological risk was evaluated using the risks assessment code(RAC) and Hkanson potential ecological risk. The analysis revealed concentrations(mg/g, dw) of the cadmium(Cd),chromium(Cr), copper(Cu), nickel(Ni), and lead(Pb) in sediments for wet and dry seasons vary from 4.40-5.08, 14.80-21.09. 35.03-44.8, 2.14-2.28, and 172.24-196.39, respectively. The results also showed that the metal fractionation percentages in the residual, oxidizable, and reducible fractions are the most significant, while the exchangeable and carbonate bound trace metals are relatively low. The RAC values indicate no risk for Cd and Ni and low risk for other metals at all the studied sites during both seasons.Potential ecological risk analysis of the heavy metal concentrations indicates that Cd had high individual potential ecological risk, while the other metals have low risk at all investigated sites. The multi-elemental potential ecological risk indices(R_1) indicate high ecological risk in all the ecosystems.     

Spatial models for probabilistic prediction of wind power with application to annual-average and high temporal resolution data

Producing accurate spatial predictions for wind power generation together with a quantification of uncertainties is required to plan and design optimal networks of wind farms. Toward this aim, we propose spatial models for predicting wind power generation at two different time scales: for annual average wind power generation, and for a high temporal resolution (typically wind power averages over 15-min time steps). In both cases, we use a spatial hierarchical statistical model in which spatial correlation is captured by a latent Gaussian field. We explore how such models can be handled with stochastic partial differential approximations of Matérn Gaussian fields together with Integrated Nested Laplace Approximations. We demonstrate the proposed methods on wind farm data from Western Denmark, and compare the results to those obtained with standard geostatistical methods. The results show that our method makes it possible to obtain fast and accurate predictions from posterior marginals for wind power generation. The proposed method is applicable in scientific areas as diverse as climatology, environmental sciences, earth sciences and epidemiology.     

Quantification of the environmental structural risk with spoiling ties: is randomization worthwhile?

Many recent works show that copulas turn out to be useful in a variety of different applications, especially in environmental sciences. Here the variables of interest are usually continuous, being times, lengths, weights, and so on. Unfortunately, the corresponding observations may suffer from (instrumental) adjustments and truncations, and eventually may show several repeated values (i.e., ties). In turn, on the one hand, a tricky issue of identifiability of the model arises, and, on the other hand, the assessment of the risk may be adversely affected. A possible remedy is to adopt suitable randomization procedures: here three different strategies are outlined. The goal of the work is to carry out a simulation study in order to evaluate the effects of the randomization of multivariate observations when ties are present. In particular, it is investigated whether, how, and to what extent, the randomization may change the estimation of the structural risk: for this purpose, a coastal engineering example will be used, as archetypical of a broad class of models and problems in engineering applications. Practical advices and warnings about the use of randomization techniques are hence given.