Respiration rates of copepod larvae and a ciliate from a tropical sea

The respiration rates of copepod larvae and a ciliate (Placus sp.) from a tropical sea were measured with an oxygen electrode method. The general range of body size of these animals was 40–161m (diameter equivalent to a sphere), and the respiration rate measured was 0.00076–0.00176l O₂ (animal)^–1h^–1 (or 2.02–9.05l O₂ (mg wet weight)^–1h^–1) at 25.5–29.2C. There was no marked difference observed between the respiration rates of copepod larvae and the ciliate. The respiration rates obtained here are relatively higher than the rates of other similar sized protozoans found in the literature, but lower than the rate extrapolated from larger planktonic copepods in tropical seas.The present results and other information available on microzooplankton biomass suggest that microzooplankton respiration is of near equal importance to that of net zooplankton in the study of energy flow through tropical, pelagic ecosystems.     

Cyclic shear behaviour of steel box girders: experiment and analysis

An experimental investigation of the cyclic shear behaviour of steel box girders was conducted on one‐quarter scale models, comprising of two specimens with longitudinally unstiffened webs and one specimen with longitudinally stiffened webs. All the specimens exhibited ductile behaviour. The tests evidenced significant increases in the shear strength and energy dissipation capacity regarding the use of thicker webs and the provision of longitudinal web stiffeners. The web stiffeners also enhanced the stable hysteresis behaviour without substantial degradation in the energy dissipation due to pinching. The test results are compared with the shear behaviour simulated by inelastic large deformation analysis incorporated with a sophisticated constitutive model. The hysteresis behaviour, peak cyclic shear stresses, energy dissipation, and deformation shapes of the three specimens are satisfactorily predicted by the analysis. It is verified that the presented analytical method can be used precisely for further investigations of box girders in shear. Copyright © 2002 John Wiley & Sons, Ltd.     

Polarization effect on radiative transfer in planetary composite atmospheres with interacting interface

A procedure of computing the radiance and the polarization parameters of radiation diffusely reflected and transmitted by an inhomogeneous, plane-parallel terrestrial atmosphere bounded by a ruffled ocean surface is discussed with the aid of the adding method. If the atmosphere and the ocean are simulated by a number of homogeneous sublayers, the matrices of radiation reflected and transmitted diffusely by the atmosphere-ocean system can be expressed in terms of these matrices of sublayers by using only a couple of iterative equations in which the polarity effect of radiation is included. Furthermore, the upwelling radiance and the polarization degree of radiation at the top of the atmosphere can be calculated by using a single iterative equation without requiring the equation for the diffuse transmission matrix of radiation. The ruffled ocean surface can be treated as an interacting interface, where the transmitted radiation from beneath the ocean surface into the atmosphere is also taken into account into the derivation of equations. Finally, sample computations of the upwelling radiance and the polarization degree of radiation from the top of the atmosphere are carried out at the wavelength of 0.60 micron.     

Short geomagnetic episodes in the Matuyama epoch

Two short geomagnetic episodes in the middle Matuyama epoch have been identified within thin (4.3-mm) sections of two deep-sea calcareous sediment cores taken in the western equatorial Pacific. Both cores are correlated by magnetostratigraphic and micropaleontological methods. Magnetic stability and paleomagnetic reliability are tested by alternating field demagnetization of natural remanent magnetization as well as by the ratios of intensities of anhysteretic remanent magnetization to those of saturation isothermal remanent magnetization. One episode is dated to be 1.06 m.y. BP. The other is identified to be about 1.94 m.y. BP, which is presumably in agreement with the Reunion event. Both episodes seem to be accompanied by conspicuous drops in field intensity. Possible correlation of field intensity with biological productivity in the ocean is also postulated from the present paleomagnetic results.     

Spatial distribution of organic matter in the Bells CM2 chondrite using near‐field infrared microspectroscopy

Abstract– Distributions of organic functional groups as well as inorganic features were analyzed in the Bells (CM2) carbonaceous chondrite using near‐field infrared (NFIR) spectroscopy. NFIR spectroscopy has recently been developed to enable infrared spectral mapping beyond the optical diffraction limit of conventional Fourier transform infrared microspectroscopy. NFIR spectral mapping of the Bells 300 nm thick sections on Al plates for 7.5 × 7.5 μm² areas showed some C‐H‐rich areas which were considered to represent the organic‐rich areas. Heterogeneous distributions of organic matter as well as those of inorganic phases such as silicates (Si‐O) were observed with 1 μm spatial resolution. The NFIR mappings of aliphatic C‐H (2960 and 2930 cm^?1) and structural OH (3650 cm^?1) confirm that organic matter is associated with phyllosilicates as previously suggested. The NFIR mapping method can provide 1 μm spatial distribution of organic functional groups and their association with minerals. High local sensitivity of NFIR enables us to find organic‐rich areas and to characterize them by their aliphatic CH₂/CH₃ ratios. The aliphatic CH₂/CH₃ ratio of Bells is slightly higher than Murchison, similar to Orgueil, and lower than literature values of IDPs and cometary dust particles.     

Elasto‐plastic model for cement‐treated sand

This paper presents an elasto‐plastic model for non‐linear analyses of cement‐treated sand. Various laboratory tests were systematically carried out to investigate the pre‐peak and post‐peak behaviours of a cement‐treated sand. On the basis of these experimental results, the new model was built within the framework of a relatively simple elasto‐plastic theory. Two failure criteria are employed to express tensile and shear failure characteristics observed in the experimental results of the cement‐treated sand. The proposed model can describe strain‐hardening and strain‐softening responses under both failure modes. In the strain‐softening rules, the smeared crack concept is used, and a characteristic length is considered to avoid the issue of mesh‐size dependency. Since the failure criterion and strain‐hardening/softening rules are based on the experimental evidences, the model is relatively easy to understand and the parameters used in the model have clear physical meaning. The proposed model was applied to simulate the behaviour of cement‐treated sand in various laboratory tests, allowing for a reasonable comprehensive evaluation. It was demonstrated that the proposed model is suitable for describing both the tensile and shear failure behaviours of cement‐treated sand. Copyright © 2006 John Wiley & Sons, Ltd.     

Structural changes of young kerogen during laboratory heating as revealed by alkaline potassium permanganate oxidation

Kerogen was isolated from a marine sediment from Tanner Basin, offshore California. Samples of the kerogen were heated under an inert atmosphere at various temperatures and times. The heated and unheated kerogens were subjected to alkaline potassium permanganate oxidation followed by GC/ MS analysis of the products. The kerogens yielded primarily aliphatic C₂–C₁₄ α,ω-dicarboxylic acids and benzene mono-to-pentacarboxylic acids. Yields of aliphatic dicarboxylic acids from kerogen decreased with increasing thermal alteration. Yields of benzenecarboxylic acids increased steadily with increasing thermal alteration. The data support the concept that thermal maturation during natural burial of this type of kerogen results in the generation of aliphatic hydrocarbons from an increasingly aromatic residue.     

Testing of the bandpass eddy covariance method for a long-term measurement of water vapour flux over a forest

The bandpass eddy covariance method has been used to measure the turbulent flux of scalar quantities using a slow-responsescalar sensor. The method issimilar in principle to the traditional eddy correlation method but includes the estimation of high-frequency components of the flux on the basis of cospectral similarity in the atmospheric surface layer. In order to investigate the performance of the method, measurements of the water vapour flux over a forest with the bandpass eddy covariance method and the direct eddy correlation method were compared. The flux obtained by the bandpass eddy covariance method agreed with that by the eddy correlation method within ±20% for most cases, in spite of a rather slow sensor-response of the adopted hygrometer. This result supports its relevance to a long-term continuous operation, since a stable, low-maintenance,general-purpose sensor canbe utilized for scalar quantities. Oneweak point of the method isits difficulty in principle to measure the correct flux when the magnitude of the sensible heat flux is very small, because the method uses the sensible heat flux as a standard reference for the prediction of undetectable high-frequency components of the scalar flux. An advanced method is then presented to increase its robustness. In the new method, output signals from a slow-response sensor are corrected using empirical frequency-responsefunctions for the sensor,thereby extending the width of the bandpass frequency region where components of the flux are directly measured (not predicted). The advanced method produced correct fluxes for all cases including the cases of small sensible heat flux. The advanced bandpass eddy covariance method is thus appropriate for along-term measurement of the scalar fluxes.