Acheulean artifact accumulation and early hominin land use,Garden Route Casino Road,Pinnacle Point,South Africa

An Early Stone Age Acheulean lithic assemblage collected along a 1.5‐km transect at the Garden Route Casino near Pinnacle Point, Mossel Bay, South Africa, was examined in order to assess the relative degree to which assemblage variability is impacted by post‐occupational processes and/or terrain. It was found that post‐occupational variables do vary across the study area, and they affect the positions of artifacts to different degrees. Terrain structure was determined to have minimal effect on artifact movement. Three analysis sections were identified as having artifacts that were likely close to their original positions and compositions. Future interpretations of differential land use can now be tempered with considerations of the post‐occupational processes that formed the recovered assemblage. © 2009 Wiley Periodicals, Inc.     

Baroclinic instability in ocean currents

Abstract

Unstable waves in a western boundary current are investigated in a full three-dimensional, numerical model. A numerical integration is carried out which traces the evolution of a growing wave on an initially uniform current with vertical shear. As indicated in earlier analytic studies based on simpler 2-layer models (Orlanski, 1969) the current is baroclinically unstable for the observed parameter range of the Gulf Stream.

Large meanders of the jet in the western boundary current are noticeable within 10 days. Finite amplitude effects, which can be investigated by the numerical model, reduce the growth rate of the disturbance by nearly an order of magnitude compared to linear theory. Comparison with observations indicate that the meanders of the Florida Current between Miami and Hatteras are probably baroclinically unstable waves.     

Sulfide Oxidation across Diffuse Flow Zones of Hydrothermal Vents

The sulfide (H₂S/HS^?) that is emitted from hydrothermal vents begins to oxidize abiotically with oxygen upon contact with ambient bottom water, but the reaction kinetics are slow. Here, using in situ voltammetry, we report detection of the intermediate sulfur oxidation products polysulfides [ $ {\text{S}}_{\text{x}}^{2 - } $ ] and thiosulfate [ $ {\text{S}}_{ 2} {\text{O}}_{ 3}^{ 2- } $ ], along with contextual data on sulfide, oxygen, and temperature. At Lau Basin in 2006, thiosulfate was identified in less than one percent of approximately 10,500 scans and no polysulfides were detected. Only five percent of 11,000 voltammetric scans taken at four vent sites at Lau Basin in May 2009 show either thiosulfate or polysulfides. These in situ data indicate that abiotic sulfide oxidation does not readily occur as H₂S contacts oxic bottom waters. Calculated abiotic potential sulfide oxidation rates are <10^?3 ??M/min and are consistent with slow oxidation and the observed lack of sulfur oxidation intermediates. It is known that the thermodynamics for the first electron transfer step for sulfide and oxygen during sulfide oxidation in these systems are unfavorable, and that the kinetics for two electron transfers are not rapid. Here, we suggest that different metal catalyzed and/or biotic reaction pathways can readily produce sulfur oxidation intermediates. Via shipboard high-pressure incubation experiments, we show that snails with chemosynthetic endosymbionts do release polysulfides and may be responsible for our field observations of polysulfides.     

Rock avalanches and other landslides in the central Southern Alps of New Zealand: a regional study considering possible climate change impacts

Slope instabilities in the central Southern Alps, New Zealand, are assessed in relation to their geological and topographic distribution, with emphasis given to the spatial distribution of the most recent failures relative to zones of possible permafrost degradation and glacial recession. Five hundred nine mostly late-Pleistocene- to Holocene-aged landslides have been identified, affecting 2% of the study area. Rock avalanches were distinguished in the dataset, being the dominant failure type from Alpine slopes about and east of the Main Divide of the Alps, while other landslide types occur more frequently at lower elevations and from schist slopes closer to the Alpine Fault. The pre-1950 landslide record is incomplete, but mapped failures have prevailed from slopes facing west–northwest, suggesting a structural control on slope failure distribution. Twenty rock avalanches and large rockfalls are known to have fallen since 1950, predominating from extremely steep east–southeast facing slopes, mostly from the hanging wall of the Main Divide Fault Zone. Nineteen occurred within 300 vertical metres above or below glacial ice; 13 have source areas within 300 vertical metres of the estimated lower permafrost boundary, where degrading permafrost is expected. The prevalence of recent failures occurring from glacier-proximal slopes and from slopes near the lower permafrost limit is demonstrably higher than from other slopes about the Main Divide. Many recent failures have been smaller than those recorded pre-1950, and the influence of warming may be ephemeral and difficult to demonstrate relative to simultaneous effects of weather, erosion, seismicity, and uplift along an active plate margin.     

Mineralogical and geochemical investigations of silicate-rich mine waste from a kyanite mine in central Virginia: implications for mine waste recycling

A kyanite mine in central Virginia produces a silicate-rich waste stream which accumulates at a rate of 450,000–600,000 tons per year. An estimated 27 million tons of this waste stream has accumulated over the past 60 years. Grain size distribution varies between 1.000 and 0.053 mm, and is commonly bimodal with modes typically being 0.425 and 0.250 mm and uniformity coefficients vary from 2.000 to 2.333. Hydraulic conductivity values vary from 0.017 to 0.047 cm/s. Mineralogy of the waste stream consists of quartz, muscovite, kyanite and hematite. Muscovite grains have distinct chemical compositions with significant Na₂O content (1.12–2.66 wt%), TiO₂ content (0.63–1.68 wt% TiO₂) and Fe content, expressed as Fe₂O₃ (up to 1.37 wt%). Major element compositions of samples were dominated by SiO₂ (87.894–90.997 wt%), Al₂O₃ (6.759–7.741 wt%), Fe₂O₃ (1.136–1.283 wt%), and K₂O (0.369–0.606 wt%) with other components being <1.000 wt%. Elements of environmental concern (V, Cr, Ni, Cu, Zn, As, Ag, Sn, Sb, Ba, Hg, Tl, and Pb) were detected; however, the concentrations of all elements except Ni were below that of the kyanite quartzites in the region from which the waste is derived. Both major and trace element compositions indicate minimal variation in composition. The waste stream has potential for recycling. Muscovite is suitable for recycling as a paint pigment or other industrial applications. Muscovite and hematite are commonly intergrown and are interpreted to be material where much of the elements of environmental concern are concentrated. Reprocessing of the waste stream to separate muscovite from other components may enable the waste stream to be used as constructed wetland media for Virginia and nearby states. Recycling of this mine waste may have a positive impact on the local economy of Buckingham County and aid in mitigation of wetland loss.     

Simulation of the subsurface mobility of carbon nanoparticles at the field scale

The production and use of nanomaterials will inevitably lead to their disposal in the natural environment. To assess the risk that these materials pose to human and ecosystem health an understanding of their mobility and ultimate fate is essential. To date, however, relatively little research has been conducted on the fate of nanoparticles in subsurface systems. In this study the subsurface mobility of two carbon nanoparticles: nano-fullerenes (nC₆₀) and multi-walled carbon nanotubes (MWCNTs) is assessed. A two-dimensional finite element model was used to simulate the movement of these nanoparticles under a range of hydrologic and geological conditions, including a heterogeneous permeability field. The numerical model is based on colloid filtration theory (CFT) with a maximum retention capacity term. For the conditions evaluated the carbon nanotubes are much more mobile than nC₆₀ due to the smaller collector efficiency associated with carbon nanotubes. However, the mobility of nC₆₀ increased significantly when a maximum retention capacity term was included in the model. Model results also demonstrate that, for the systems examined, nanoparticles were predicted to be less mobile in heterogeneous systems compared to the homogeneous systems with the same average hydraulic properties.     

Genetic structure of the tall sea pen Funiculina quadrangularis in NW Scottish sea lochs

The tall sea pen Funiculina quadrangularis has a patchy distribution around the UK, being found in sheltered waters below 20 m depth on the northwest coast of Scotland and Ireland. The limited distribution and sensitivity to bottom fishing activities make F. quadrangularis vulnerable to reduction in population numbers that may lead to genetic isolation and reduced diversity. Because of this vulnerability and low resilience to physical disturbance, the tall sea pen is recognised as a Species of Principle Importance under the Natural Environment and Rural Communities Act, 2006, UK. ( http://www.legislation.gov.uk/ukpga/2006/16/contents ) and is also on the Biodiversity Action Plan list of Priority Species for the UK. In the Mediterranean it is recognised as a sensitive and essential fish habitat because it forms habitat for several commercially important crustaceans. The aim of this study was to understand the current state of the genetic structure and gene flow of F. quadrangularis in areas of NW Scotland. We developed 10 microsatellite markers and used them to genotype 176 samples from four populations. Overall, our results suggest that there is high genetic diversity and high gene flow between colonies of F. quadrangularis in and among locations in Loch Linnhe and Loch Duich. As a result of the high rates of gene flow, genetic differentiation between sites was low. This may provide resilience to human impacts if distant populations have a high connectivity. However, care must be taken, as small but significant isolation by distance was found between the most geographically distant sites and only a small part of the species range was examined in this study. The genetic tools developed here will provide a foundation for wider studies of this vulnerable species.     

ISO Far-IR spectroscopy of IR-bright galaxies and ULIRGs

Based on far-infrared spectroscopy of a small sample of nearbyinfrared-bright and ultraluminous infrared galaxies (ULIRGs) with theISO Long Wavelength Spectrometer we find adramatic progression in ionic/atomic fine-structure emission line andmolecular/atomic absorption line characteristics in these galaxiesextending from strong [O III]52,88 m and [N III]57 m lineemission to detection of only faint [C II]158 m line emissionfrom gas in photodissociation regions in the ULIRGs. The molecularabsorption spectra show varying excitation as well, extending fromgalaxies in which the molecular population mainly occupies the groundstate to galaxies in which there is significant population in higherlevels. In the case of the prototypical ULIRG, the merger galaxy Arp220, the spectrum is dominated by absorption lines of OH, H₂O, CH,and [O I]. Low [O III]88 m line flux relative to the integratedfar-infrared flux correlates with low excitation and does not appear tobe due to far-infrared extinction or to density effects. A progressiontoward soft radiation fields or very dusty H II regions may explainthese effects.     

Paragenesis and geochemistry of ore minerals in the epizonal gold deposits of the Yangshan gold belt,West Qinling,China

Six epizonal gold deposits in the 30-km-long Yangshan gold belt, Gansu Province are estimated to contain more than 300 t of gold at an average grade of 4.76 g/t and thus define one of China's largest gold resources. Detailed paragenetic studies have recognized five stages of sulfide mineral precipitation in the deposits of the belt. Syngenetic/diagenetic pyrite (Py₀) has a framboidal or colloform texture and is disseminated in the metasedimentary host rocks. Early hydrothermal pyrite (Py₁) in quartz veins is disseminated in metasedimentary rocks and dikes and also occurs as semi-massive pyrite aggregates or bedding-parallel pyrite bands in phyllite. The main ore stage pyrite (Py₂) commonly overgrows Py₁ and is typically associated with main ore stage arsenopyrite (Apy₂). Late ore stage pyrite (Py₃), arsenopyrite (Apy₃), and stibnite occur in quartz ± calcite veins or are disseminated in country rocks. Post-ore stage pyrite (Py₄) occurs in quartz ± calcite veins that cut all earlier formed mineralization. Electron probe microanalyses and laser ablation-inductively coupled plasma mass spectrometry analyses reveal that different generations of sulfides have characteristic of major and trace element patterns, which can be used as a proxy for the distinct hydrothermal events. Syngenetic/diagenetic pyrite has high concentrations of As, Au, Bi, Co, Cu, Mn, Ni, Pb, Sb, and Zn. The Py₀ also retains a sedimentary Co/Ni ratio, which is distinct from hydrothermal ore-related pyrite. Early hydrothermal Py₁ has high contents of Ag, As, Au, Bi, Cu, Fe, Sb, and V, and it reflects elevated levels of these elements in the earliest mineralizing metamorphic fluids. The main ore stage Py₂ has a very high content of As (median value of 2.96 wt%) and Au (median value of 47.5 ppm) and slightly elevated Cu, but relatively low values for other trace elements. Arsenic in the main ore stage Py₂ occurs in solid solution. Late ore stage Py₃, formed coevally with stibnite, contains relatively high As (median value of 1.44 wt%), Au, Fe, Mn, Mo, Sb, and Zn and low Bi, Co, Ni, and Pb. The main ore stage Apy₂, compared to late ore stage arsenopyrite, is relatively enriched in As, whereas the later Apy₃ has high concentrations of S, Fe, and Sb, which is consistent with element patterns in associated main and late ore stage pyrite generations. Compared with pyrite from other stages, the post-ore stage Py₄ has relatively low concentrations of Fe and S, whereas As remains elevated (2.05～3.20 wt%), which could be interpreted by the substitution of As^? for S in the pyrite structure. These results suggest that syngenetic/diagenetic pyrite is the main metal source for the Yangshan gold deposits where such pyrite was metamorphosed at depth below presently exposed levels. The ore-forming elements were concentrated into the hydrothermal fluids during metamorphic devolatilization, and subsequently, during extensive fluid–rock interaction at shallower levels, these elements were precipitated via widespread sulfidation during the main ore stage.     

Evaluating post-wildfire logging-slash cover treatment to reduce hillslope erosion after salvage logging using ground measurements and remote sensing

Continuing long and extensive wildfire seasons in the Western US emphasize the need for better understanding of wildfire impacts including post-fire management scenarios. Advancements in our understanding of post-fire hillslope erosion and watershed response such as flooding, sediment yield, and debris flows have recently received considerable attention. The potential impacts of removing dead trees, called salvage logging, has been studied, however the use of remotely sensed imagery after salvage logging to evaluate spatial patterns and recovery is novel. The 2015 North Star Fire provided an opportunity to evaluate hillslope erosion reduction using two field experiments and coincidental remotely sensed imagery over 3 years. Simulated rill experiments with four flow rates were used to quantify hillslope erosion on skidder trails with and without added logging slash compared with a burned-only control. Seven replicated hillslope silt fence plots with the same treatments were also evaluated for natural rainfall events. WorldView-2 satellite imagery was used to relate ground cover and erodible bare soil between the two experiments using multi-temporal Normalized Differenced Vegetation Index (NDVI) values. Results indicate that the skid trails produced significantly more sediment (0.70 g s⁻¹) than either the slash treated skid trail (0.34 g s⁻¹) or controls (0.04 g s⁻¹) with the simulated rill experiment. Similarly, under natural rainfall conditions sediment yield from hillslope silt fence plots was significantly greater for the skid trail (3.42 Mg ha⁻¹) than either the slash treated skid trail (0.18 Mg ha⁻¹) or controls (0 Mg ha⁻¹). An NDVI value of 0.32 on all plots over all years corresponded to a ground cover of about 60% which is an established threshold for erosion reduction. Significant relationships between NDVI, ground cover, and sediment values suggest that NDVI may help managers evaluate ground cover and erosion potential remotely after disturbances such as a wildfire or salvage logging.