Validation of a Crop Yield and CO<Subscript>2</Subscript> Fixation Model over Southeast Asia by Carbon Partitioning in Grain Plants

A photosynthetic-sterility model for grain production monitoring has been developed and validated under the background of climate change and Asian economic growth in developing countries. This paper presents an application of the model to evaluate carbon-fixation rates in yields of paddy rice, winter wheat, and maize in Asia. The validation of the model is based on carbon partitioning in grain plants. The carbon hydrate in grains has the same chemical formula as that of cellulose in grain vegetation. The partitioning of carbon in plants can validate fixation amounts of computed carbon using a satellite-based photosynthesis model. The model estimates the photosynthesis fixation of rice reasonably in Japan and China. Results were validated through examination of carbon in grains, but the model tends to underestimate results for winter wheat and maize. This study also provides daily distributions of the PSN, which is the CO₂ fixation in Asian areas combined with a land-cover distribution classified from MODIS data, NDVI from SPOT VEGETATION, and meteorological re-analysis data by European Centre for Medium-Range Forecasts (ECMWF). The mean CO₂ and carbon fixation rates in paddy areas were 25.92 (t CO₂/ha) and 5.28 (t C/ha) in Japan, respectively. Comparisons between the model’s values and MODIS seasonal PSNs show similar trends. The writers are preparing to compare computed photosynthesis rates with observed AsiaFlux data for the validation of this model at field sites of paddy, grassland and forests in Japan and Asian countries.     

Ground motion spatial variability effects on seismic response control of cable-stayed bridges

The spatial variability of input ground motion at supporting foundations plays a key role in the structural response of cable-stayed bridges (CSBs); therefore, spatial variation effects should be included in the analysis and design of effective vibration control systems. The control of CSBs represents a challenging and unique problem, with many complexities in modeling, control design and implementation, since the control system should be designed not only to mitigate the dynamic component of the structural response but also to counteract the effects of the pseudo-static component of the response. The spatial variability effects on the feasibility and efficiency of seismic control systems for the vibration control of CSBs are investigated in this paper. The assumption of uniform earthquake motion along the entire bridge may result in quantitative and qualitative differences in seismic response as compared with those produced by uniform motion at all supports. A systematic comparison of passive and active system performance in reducing the structural responses is performed, focusing on the effect of the spatially varying earthquake ground motion on the seismic response of a benchmark CSB model with different control strategies, and demonstrates the importance of accounting for the spatial variability of excitations.     

Cagniard de-Hoop method for a Haskell type vertical fault

Summary. There are two ways to apply the Cagniard de-Hoop method when generating synthetic seismograms due to a source in a three-dimensional medium. One is the Hankel transform method (hereafter called 'the cylindrical wave representation method'), which utilizes the property of the modified Bessel function. The other is 'the plane wave representation method', which replaces the Bessel function by a superposition of plane waves. In extending a point source to a finite dimensional source, the latter method is extremely useful, because it enables the integrations on the fault surface to be performed analytically.
Using the latter method, expressions for displacements due to a Haskell type vertical fault in a uniform half-space are obtained. A solution is given as a sum of four quadrantal source contributions, which is similar to Madariaga's solution for a source in the whole space. Each contribution consists of a single finite range integration or a single integration plus a pole contribution, depending on the location of the observation point with respect to the source. The procedure can be extended to other fault types.     

Distribution of gold and silver and its relation with hypogene ore minerals in the Esperanza porphyry deposit,Antofagasta Region,Chile

Modes of occurrence of Au‐ and Ag‐bearing phases and their relation with associated hypogene ore minerals were examined with the objective to elucidate Au‐Ag distribution at the Esperanza porphyry deposit in the Eocene Centinela copper belt, using ore‐microscope modal analysis, semi‐quantitative analyses by automated mineralogy, electron probe microanalysis, and secondary ion mass spectrometer. The Esperanza hypogene mineralization is characterized by early‐stage chalcopyrite‐rich veinlets in the potassic alteration zone and later polymetallic stage with tennantite and galena in the chlorite‐sericitic alteration zone. Only the early‐stage chalcopyrite contains fine‐grained electrum (Au₆₈Ag₃₂ ‐ Au₈₁Ag₁₉) and hessite (Ag₂Te), and thus yields positive correlations in Cu vs. Au and Cu vs. Ag grades that are clearly recognized in the hypogene sulfide zone. The early‐stage chalcopyrite grains frequently exhibit polysynthetic twinning suggestive of inversion from intermediate solid solution. These features suggest that the fine‐grained electrum and hessite are products exsolved in the cooling process with the intermediate solid solution to chalcopyrite inversion. In contrast, tennantite and galena of the later‐stage mineralization contain no detectable Ag, and it is thus proposed that the early‐stage inverted chalcopyrite is the principal storage of economically important precious metals.     

Petrogenesis of the Kaikomagatake granitoid pluton in the Izu Collision Zone, central Japan: implications for transformation of juvenile oceanic arc into mature continental crust

The Miocene Kaikomagatake pluton is one of the Neogene granitoid plutons exposed in the Izu Collision Zone, which is where the juvenile Izu-Bonin oceanic arc is colliding against the mature Honshu arc. The pluton intrudes into the Cretaceous to Paleogene Shimanto accretionary complex of the Honshu arc along the Itoigawa-Shizuoka Tectonic Line, which is the collisional boundary between the two arcs. The pluton consists of hornblende–biotite granodiorite and biotite monzogranite, and has SiO₂ contents of 68–75 wt%. It has high-K series compositions, and its incompatible element abundances are comparable to the average upper continental crust. Major and trace element compositions of the pluton show well-defined chemical trends. The trends can be interpreted with a crystal fractionation model involving the removal of plagioclase, biotite, hornblende, quartz, apatite, and zircon from a potential parent magma with a composition of ~68 wt% SiO₂. The Sr isotopic compositions, together with the partial melting modeling results, suggest that the parent magma is derived by ~53% melting of a hybrid lower crustal source comprising ~30% Shimanto metasedimentary rocks of the Honshu arc and ~70% K-enriched basaltic rocks of the Izu-Bonin rear-arc region. Together with previous studies on the Izu Collision Zone granitoid plutons, the results of this study suggest that the chemical diversity within the parental magmas of the granitoid plutons reflects the chemical variation of basaltic sources (i.e., across-arc chemical variation in the Izu-Bonin arc), as well as a variable contribution of the metasedimentary component in the lower crustal source regions. In addition, the petrogenetic models of the Izu Collision Zone granitoid plutons collectively suggest that the contribution of the metasedimentary component is required to produce granitoid magma with compositions comparable to the average upper continental crust. The Izu Collision Zone plutons provide an exceptional example of the transformation of a juvenile oceanic arc into mature continental crust.     

ICT-Based Remediation with Knowledge Information Management for Contaminated Groundwater

ICT-based remediation with knowledge information management is presented for the pump-and-treat method of contaminated groundwater. The usefulness of ICT is discussed for monitoring contaminants and groundwater level, transferring data between the remediation well and the remote remediation center, and decision support analysis for controlling the remediation well. A prototype system was developed and applied to field measurement. The prototype system performed reliably for ~600 days. As a decision support analysis, a fuzzy inference model is discussed. The membership functions were determined based on simple reliability theory. The effectiveness of the proposed method was assessed by numerical simulations. The simulation results suggest that the proposed method is likely to reduce the pumped quantity compared to PID control or an engineer’s empirical knowledge. Analysis results are also shown for cancer risks from contaminants and ground settlement risks due to excess pumping up of groundwater.     

Prediction and mitigation analysis of ground vibration caused by running high-speed trains on rigid-frame viaducts

In this study a 3D numerical analysis approach is developed to predict the ground vibration around rigid-frame viaducts induced by running high-speed trains. The train-bridge-ground interaction system is divided into two subsystems: the train-bridge interaction and the soil-structure interaction. First, the analytical program to simulate bridge vibration with consideration of train-bridge interaction is developed to obtain the vibration reaction forces at the pier bottoms. The highspeed train is described by a multi-DOFs vibration system and the rigid-frame viaduct is modeled with 3D beam elements. Second, applying these vibration reaction forces as input external excitations, the ground vibration is simulated by using a general-purpose program that includes soil-structure interaction effects. The validity of the analytical procedure is confirmed by comparing analytical and experimental results. The characteristics of high-speed train-induced vibrations, including the location of predominant vibration, are clarified. Based on this information a proposed vibration countermeasure using steel strut and new barrier is found effective in reducing train-induced vibrations and it satisfies environmental vibration requirements. The vibration screening efficiency is evaluated by reduction VAL based on 1/3 octave band spectral analysis.     

Ecological variations in diatom assemblages in the Paleo-Kathmandu Lake linked with global and Indian monsoon climate changes for the last 600,000 years

Variations in fossil diatom assemblages and their relationship with global and Indian monsoon climate changes for the last 600,000 yr were investigated using a core of ancient lake (Paleo-Kathmandu Lake) sediments drilled at the Kathmandu Basin, Nepal Himalaya. Chronological scales of the core were constructed by tuning pollen wet and dry index records to the SPECMAP δ¹⁸O stack record. Examinations of biogenic silica contents and fossil diatom assemblages revealed that variations in productivity and compositions of diatom assemblages were closely linked with global and Indian monsoon climate changes on glacial and interglacial time scales. When summer monsoonal rainfall increased during interglacials (interstadials), diatom productivity increased because of increased inputs of terrestrial nutrients into the lake. When summer monsoonal rainfall reduced and/or winter monsoonal aridification enhanced during glacials (stadials), productivity of the diatoms decreased and lake-level falling brought about changes in compositions of diatom assemblages. Monospecific assemblages by unique Cyclotella kathmanduensis and Puncticulata versiformis appeared during about 590 to 390 ka. This might be attributed to evolutionary fine-tuning of diatom assemblages to specific lake environmental conditions. Additionally, low-amplitude precessional variations in monsoon climate and less lake-level changes may have also allowed both species to dominate over the long periods.     

High-resolution terrestrial carbon isotope and planktic foraminiferal records of the Upper Cenomanian to the Lower Campanian in the Northwest Pacific

Making Upper Cretaceous biostratigraphic correlations between the Northwest Pacific and Tethyan–Atlantic sections have been difficult because of rare frequencies of age-diagnostic macro- and microfossils in the sequences in the Northwest Pacific region. In order to correlate these sections precisely, an integrated planktic foraminiferal and bulk wood carbon-isotope stratigraphy from the upper Cenomanian to the lower Campanian succession (the middle–upper part of the Yezo Group) of Hokkaido, northern Japan is established with an average resolution of 50 k.y. The δ¹³C curves from bulk wood of the Yezo Group and from bulk carbonate of English Chalk show remarkably similar patterns of isotopic fluctuation, allowing the correlation of 22 carbon isotopic events between these sections. This high-resolution correlation greatly improves the previous micro- and macrofossil biostratigraphic schemes in the Northwest Pacific region, and reveals that global events, such as the oxygen depletion at the OAE 2 horizon, the constant decrease in pCO₂ during the Late Cretaceous, and the eustatic sea-level falls in the late middle Turonian, Santonian/Campanian Boundary and early Campanian, are recorded in the Upper Cretaceous sequence of the Northwest Pacific.