Giant Mineral Deposits and Their Geodynamic Setting in the Lanping Basin, Yunnan, China

There are giant mineral deposits, including the Jinding Zn-Pb and Baiyangping Ag-Co-Cu, and otherimportant mineral deposits (e.g., Baiyangchang Ag-Cu, Jinman Cu deposits, etc.) in the Lanping Mesozoic-Cenozoic Basin, Yunnan Province, China. The tabular ore-bodies and some veins hosted in terrestrial clastic rocks of the Mesozoic-Cenozoic age and no outcropping of igneous rocks in the giant deposits lead to the proposal of syngenetic origin, but the giant mineral deposits are not stratabound (e.g. MVT, sandstone- and Sedex-type). They formed in a continental red basin with intense crust movement. The mineralization is controlled by structures and lithology and occurs in different strata, and no sedimentary nature and no exhalative sediments are identified in the deposits. The deposits show some relations with organic matter (now asphalt and petroleum) and evaporates (gypsum). The middle-low-temperature (mainly 110℃ to 280℃) mineralization took place at a depth of about 0.9 km to 3.1 km during the early     

A Simple Monte Carlo Method for Locating the Three-dimensional Critical Slip Surface of a Slope

Based on the assumption of the plain-strain problem, various optimization or random search methods have been developed for locating the critical slip surfaces in slope-stability analysis, but none of such methods is applicable to the 3D case. In this paper, a simple Monte Carlo random simulation method is proposed to identify the 3D critical slip surface. Assuming the initial slip to be the lower part of a slip ellipsoid, the 3D critical slip surface is located by means of a minimized 3D safety factor. A column-based 3D slope stability analysis model is used to calculate this factor. In this study, some practical cases of known minimum safety factors and critical slip surfaces in 2D analysis are extended to 3D slope problems to locate the critical slip surfaces. Compared with the 2D result, the resulting 3D critical slip surface has no apparent difference in terms of only cross section, but the associated 3D safety factor is definitely higher.     

塔里木盆地库车坳陷白垩纪层序地层格架及古地理演化

白垩纪的库车坳陷是一个干旱气候条件下的内陆坳陷,其中只发育下白垩统,为一套干旱红层地层,进一步划分为亚格列木组、舒善河组、巴西盖组和巴什基奇克组。该套干旱红层,包括洪积扇砾岩、间歇性河流砂砾岩、风成砂岩和沙漠湖紫红色泥岩等沉积。这些沉积在地层记录中常以一种特别的旋回性形式产出,在不整合面及其相关面之上首先沉积的是洪积扇砾岩和间歇性河流砂砾岩所构成的冲积沉积物,向上逐渐演变为沙漠湖红色泥岩,在成湖初期或湖退期发育了滨湖相风成砂岩,它们构成了一个较为典型的沙漠沉积体系。从冲积沉积到湖泊沉积构成总体向上变细的沉积相序组合。按照地层记录的旋回性进行三级沉积层序划分,将库车坳陷下白垩统划分为5个三级沉积层序即SQ1至SQ5。下白垩统的顶和底界面均为间断时间很长的区域不整合面,由它们所限定的下白垩统本身则构成一个二级构造层序,在二级构造层序内三级沉积层序常常形成有规律的叠加形式,下部的SQ1和上部的SQ5发育较多的冲积粗碎屑物,中部SQ2至SQ4则以湖泊相沉积为主。与海相地层不同,库车坳陷白垩系中由三级层序和二级层序所代表的地层记录中的中周期和长周期旋回的主要控制因素是幕式构造沉降,沉降初期由于地形高差大而以发育冲积粗碎屑物为主,均衡沉降期则与成湖期相对应从而发育较多的细粒沙漠湖沉积。以沉积物的时间演化序列和沉积相的空间展布形式所代表的规律性入手,建立库车坳陷下白垩统的层序地层格架,在层序地层框架内,系列层序地层格架栅状图和相应的古地理图较为清晰地反映出早白垩世库车坳陷的古地理面貌,以及相应的沉积岩相古地理演变过程。     

滇西兰坪盆地五茂林剖面下白垩统景星组沉积相

实测了云南西部兰坪盆地东部下白垩统下部景星组的五茂林剖面,建立了曲流河、三角洲和湖泊3种沉积序列,其中三角洲序列在云南下白垩统中属首次建立。分析了粗碎屑岩的组成,将该剖面上出露的砾岩分成4类。早白垩世时兰坪盆地属丹那沙林-高黎贡弧的弧后盆地,景星组自下而上为曲流河沉积、三角洲沉积和湖泊沉积,且随湖侵发生,湖泊向西扩大。     

河南西峡盆地上白垩统河流及湖泊沉积中的遗迹组构

河南西峡盆地上白垩统马家村组沉积厚度巨大,达1 960 m,由辫状河沉积、曲流河沉积和湖泊沉积组成。在河流与湖泊沉积中,发育丰富的遗迹化石,共6种类型,分别为Skolithos linearis、Cylindricumichnosp、Palaeophycus tubularis“J”形潜穴、垂直分枝潜穴和垂直螺旋潜穴。从形态分析,大多数为居住迹,按照遗迹化石产出岩层的岩性、扰动特征和残留遗迹等总体特征,将所发现的遗迹化石层划分为两类遗迹组构,即软底组构和僵底组构。前者主要发育在纹层状极细砂岩和粉砂岩中,潜穴密度大,属种单一,包括Skolithos组构和Palaeophycus组构;后者主要发育在厚层泥岩中,潜穴密度较大,类型稍多,包括由Cylindricum ichnosp、垂直分枝潜穴J形潜穴和垂直螺旋潜穴所组成的遗迹组构。与报道过的其他地区陆相遗迹化石的对比表明,随着时间的推移,河流沉积中的组构特征在白垩纪有明显变化,而浅湖沉积中的遗迹组构表明造迹生物的扰动能力显著加强。     

Tectonics and Mechanisms of Uplift in the Central Uplift Belt of the Huimin Depression

The Huimin (惠民) depression is a third-level tectonic element of the Bohai (渤海) Bay basin in eastern China. The central uplift belt is the most important oil and gas accumulation zone in the depression, but the lack of adequate geological studies in the area has greatly hindered exploration and development. In this article, using seismic data, fracture mechanics, and a combination of data on fault growth indices and fault throws, we present an analysis of tectonic activity in the central uplift belt and adja...     

Deposition Process of Dust Microparticles from Aerosol to Snow-Firn Pack on Glacier No. 1 in Eastern Tianshan Mountains, China

Samples were continuously collected from aerosol, fresh snow, and snow pits on Glacier No. 1 at Urumqi River source in eastern Tianshan (天山) Mountains. The deposition processes and the characteristics of mineral dust microparticles from aerosol to fresh snow, and then evolution to the snow pit were determined. Total dust microparticle concentration in the surface snow and aerosol showed a similar temporal variation trend, which was strongly associated with regional and local at-mospheric circulation in the ...     

秦南地区天然气成因与油气勘探潜力分析

为了评价和认识秦南地区有重大勘探突破的陡坡带和该区的勘探潜力,利用该地区天然气组分和碳同位素等分析资料、伴生原油的油源对比以及油气运移模拟,定量刻画与定性评价相结合,对秦南地区天然气成因和油气勘探潜力进行了系统研究.研究表明:凸起带天然气为新近系溶解气且以干气为主,陡坡带天然气为古近系凝析气且为湿气;陡坡带天然气主要为...     

内蒙古固阳盆地东北缘更新统洪积物地层的发现及研究意义

关于内蒙古高原的隆升,长期以来研究较少,从更新世的冲、洪积物分布在现今1600～1700m海拔高程的山顶上出发,发现固阳盆地东北缘更新统的洪积物的沉积类型、沉积特点和粗碎屑岩系的组分以及孢粉的资料,无不与内蒙古高原隆升紧密相关.内蒙古高原隆升不是孤立的,而是受青藏高原隆升的控制,它们几乎是同步的或者说紧密相连的.     

雪峰山基底隆升带及其邻区印支期陆内构造特征与成因

狭义的华南陆块东部包括扬子地块和华夏地块,而雪峰山陆内构造系统是扬子地块的重要组成部分。通过对雪峰山地区印支期地层角度不整合时空分布规律的分析表明,高角度不整合—微角度不整合—平行不整合—整合的空间分布区域依次由东往西递变渐新。根据褶皱变形分析得出,雪峰山地区在印支期发育了北东东向和北北东向2个轴迹方向的褶皱,后期叠加了南北向弧形逆冲推覆构造。区域构造背景和动力学分析表明,扬子地块内部印支期总体北东向的变形形迹与东西轴向的秦岭—大别造山带和扬子地块南部东西轴向的构造线相垂直;其原因是:扬子地块与华夏地块最终陆内收缩变形的时间比扬子与华北沿秦岭—大别造山带的陆间碰撞拼合的时间早,印支早期的先存北北东向构造线在印支晚期由于扬子地块顺时针旋转变位为北东东向,从而决定了印支早期现今北东东向的构造线,随后的第二幕北北东向构造线的形成是在与早期第一幕变形的应力场相同的同一构造应力场作用下形成的。但是,秦岭—大别造山带近东西向的构造线取决于主动大陆边缘,即总体近东西向的华北陆块南缘边界,其原始方位为总体近东西向。这些复杂边界条件和旋转决定了先形成彼此近于垂直的构造线,然后拼接形成现今构造线垂直的格局。