Rare earth elements in metagabbros from the Mid-Atlantic Ridge and their possible implications for the genesis of alkali olivine basalts as well as the lizard peridotite

Two foliated metagabbros from the Mid-Atlantic Ridge near 30° N were analyzed for rare earth elements. The chondrite-normalized rare earth pattern for one of them is quite similar to those for abyssal tholeiites. The pattern for another sample, however, is somewhat different from the above one. A new set of bulk partition coefficients for rare earth elements has been estimated correspondingly. This set throws a new light on the interpretation that many alkali olivine basalts were produced by a zone melting or partial melting of primary-liquid-type material. Also the same partition coefficients lead us to an inference that the high-temperature peridotite intrusion in the Lizard area, Cornwall, England, is a secondary-solid-type material which was once in equilibrium with a primary-solid-type material, whereas the pyroxenite, Canyon Mountain, Oregon, is a primary-solid-type material.Both of the metagabbros studied show positive europium anomaly.     

Numerical study of the oxidation process of dimethylsulfide in the marine atmosphere

A box model, involving simple heterogeneous reaction processes associated with the production of non-sea-salt sulfate (nss-SO ₄ ^2– ) particles, is used to investigate the oxidation processes of dimethylsulfide (DMS or CH₃SCH₃) in the marine atmosphere. The model is applied to chemical reactions in the atmospheric surface mixing layer, at intervals of 15 degrees latitude between 60° N and 60° S. Given that the addition reaction of the hydroxyl radical (OH) to the sulfur atom in the DMS molecule is faster at lower temperature than at higher temperature and that it is the predominant pathway for the production of methanesulfonic acid (MSA or CH₃SO₃H), the results can well explain both the increasing tendency of the molar ratio of MSA to nss-SO ₄ ^2– toward higher latitudes and the uniform distribution with latitude of sulfur dioxide (SO₂). The predicted production rate of MSA increases with increasing latitude due to the elevated rate constant of the addition reaction at lower temperature. Since latitudinal distributions of OH concentration and DMS reaction rate with OH are opposite, a uniform production rate of SO₂ is realized over the globe. The primary sink of DMS in unpolluted air is caused by the reaction with OH. Reaction of DMS with the nitrate radical (NO₃) also reduces DMS concentration but it is less important compared with that of OH. Concentrations of SO₂, MSA, and nss-SO ₄ ^2– are almost independent of NO _x concentration and radiation field. If dimethylsulfoxide (DMSO or CH₃S(O)CH₃) is produced by the addition reaction and further converted to sulfuric acid (H₂SO₄) in an aqueous solution of cloud droplets, the oxidation process of DMSO might be important for the production of aerosol particles containing nss-SO ₄ ^2– at high latitudes.     

Influence of fine sediment on the fluidity of debris flows

Debris flows include a great diversity of grain sizes with inherent features such as inverse grading, particle size segregation, and liquefaction of fine sediment. The liquefaction of fine sediment affects the fluidity of debris flows, although the behavior and influence of fine sediment in debris flows have not been examined sufficiently. This study used flume tests to detect the effect of fine sediment on the fluidity of laboratory debris flows consisting of particles with various diameters. From the experiments, the greatest sediment concentration and flow depth were observed in the debris flows mixed with fine sediment indicating increased flow resistance. The experimental friction coefficient was then compared with the theoretical friction coefficient derived by substituting the experimental values into the constitutive equations for debris flow. The theoretical friction coefficient was obtained from two models with different fine-sediment treatments: assuming that all of the fine sediments were solid particles or that the particles consisted of a fluid phase involving pore water liquefaction. From the comparison of the friction coefficients, a fully liquefaction state was detected for the fine particle mixture. When the mixing ratio and particle size of the fine sediment were different, some other cases were considered to be in a partially liquefied transition state. These results imply that the liquefaction of fine sediment in debris flows was induced not only by the geometric conditions such as particle sizes, but also by the flow conditions.     

Japanese early-warning for debris flows and slope failures using rainfall indices with Radial Basis Function Network

Early-warning systems for natural disasters are important tools for disaster risk reduction and for achieving sustainable development and livelihoods. In 2005, the Japanese government initiated a new nationwide early-warning system for landslides disasters. The main methodology of the system is to set a criterion for occurrences of debris flows and slope failures based on several rainfall indices (60-min cumulative rainfall and soil–water index) in each 5-km grid mesh covering all of Japan. Because many of the records of mass movements are lacking in scientific precision on timing and location, the system applies Radial Basis Function Network methods to set the criterion based primarily on rainfall data recorded as not triggering disasters. Since the end of March 2007, under torrential rainfall conditions, early-warning information has been disseminated as part of weather news using TV, radio, and the Internet. Because of the increasing worldwide recognition of the importance of early-warning systems for natural disaster reduction, the aim of this article is to introduce the new Japanese early-warning system to the international landslide community. In this article, the method, the system, and the result of its application to landslide disasters in 2009 are presented.     

Structure and time variations of the Jovian ionosphere

The problem of the ionospheric formation in the Jovian upper atmosphere is examined. By adopting two plausible atmospheric models, we solve coupled time-dependent continuity equations for ions H₂⁺, H₅⁺, H⁺, H₃⁺ and H_eH⁺ simultaneously. It is shown that both radiative and three body association of H⁺ to H₂ are important for the determination of the structure of the Jovian ionosphere. The maximum electron density in the daytime is found to be about 10⁵ cm^?3. It is also shown that diurnal variation with large-amplitude can exist in the Jovian ionosphere.     

Active spreading and hydrothermalism in North Fiji Basin (SW Pacific). Results of Japanese French Cruise Kaiyo 87

The aim of the Japanese-French Kaiyo 87 cruise was the study of the spreading axis in the North Fiji Basin (SW Pacific). A Seabeam and geophysical survey allowed us to define the detailed structure of the active NS spreading axis between 16° and 22° S and its relationships with the left lateral motion of the North Fiji Fracture Zone. Between 21° S and 18°10′ S, the spreading axis trends NS. From 18°10 S to 16°40 S the orientation of the spreading axis changes from NS to 015°. North of 16°40′ S the spreading axis trends 160°. These two 015° and 160° branches converge with the left lateral North Fiji fracture zone around 16°40′ S to define an RRFZ triple junction. Water sampling, dredging and photo TV deep towing give new information concerning the hydrothermal activity along the spreading axis. The discovery of hydrothermal deposits associated with living communities confirms this activity.     

利用场地观测计算地表通量

高原地表的感热和潜热通量在亚洲季风系统中有很重要的作用。由于高原地域辽阔，且自然环境较严酷，不利于建立完善的地面观测系统。因此，卫星遥感观测就成为测算高原整体感热和潜热通量的有效工具。地面场地的观测结果作为地表通量的真实值，对于卫星遥感测算是非常重要的。它也为构建陆面—大气模型提供了科学依据，是卫星资料的资料同化系统中的重要组成部分。 计算场地热量通量有几种不同的处理方法。最简单的方法利用有效的观测和试验的参数，可以给出稳定连续的估计。愈精确的Bowen比或者廓线的观测能给出愈精确的信息。综合了湍流测量及辐射测量、土壤热通量的观测结果的估计对陆面—大气相互作用进行了详细的描述，以适应模式的发展。从1998年开始，这些方法联合应用到青藏高原；场地通量观测方面的成果以及目前对其理解将在本文中做一概述。     

The nature of scattered and concretion pyrite in the Upper Abalak Formation of the Salym oil field (Western Siberia)

Dispersed and concretionary pyrite in chert–clay–carbonate and carbonate rocks of the Abalak Formation (Salym oil field) have been studied. The study was conducted using Scanning Electron Microscopy (SEM), Electron Probe Microanalysis (EPMA), and high spatial resolution Secondary Ion Mass Spectrometry (Nano-SIMS). As a result, three morphological groups of pyrite have been distinguished: large cubic crystals, framboidal pyrite, and fine-crystal aggregates that replace organic remnants. The sulphur isotope ratio allows one to distinguish two genetic types of pyrite. The source of the sulphur for the first genetic group was H₂S produced by bacterial sulphate reduction, while the second group pyrite was formed with sulphur as a product of thermochemical sulphate reduction.     

High-P metamorphism, pattern of induced flow in the mantle wedge, and the link with plutonism in paired metamorphic belts

The convex form of subduction-stage pressure–temperature ( P–T ) paths up to c. 2.0 GPa implies the Sambagawa high- P metamorphic belt, Japan, formed a few million years before ridge subduction. Additional compilation of P–T conditions for higher- P Sambagawa rocks ( c. 2.0–2.5 GPa) reveals that the thermal profile along the slab surface shows a remarkable high- T -ward warping at c. 2.0 GPa ( c. 65 km). Previous thermal models indicate that this warping corresponds to the onset of induced mantle flow towards the subducting slab. If a normal thickness continental crust of c. 30 km was present, this implies the hangingwall region between 30 and 65 km depth was occupied by serpentinized wedge mantle isolated from large-scale mantle flow. Subsequent arrival of the spreading ridge, reheating and dehydration of the serpentinized wedge probably supplied the water necessary for causing granitic magmatism in the Ryoke high- T metamorphic belt, which is paired with the Sambagawa belt.     

Optical properties of the red tide in Isahaya Bay,southwestern Japan: Influence of chlorophyll a concentration

Remote sensing reflectance [R _rs(λ)] and absorption coefficients of red tides were measured in Isahaya Bay, southwestern Japan, to investigate differences in the optical properties of red tide and non-red tide waters. We defined colored areas of the sea surface, visualized from shipboard, as “red tides”. Peaks of the R _rs(λ) spectra of non-red tide waters were at 565 nm, while those of red tides shifted to longer wavelengths (589 nm). The spectral shape of R _rs(λ) was close to that of the reciprocal of the total absorption coefficient [1/a(λ)], implying that the R _rs(λ) peak is determined by absorption. Absorption coefficients of phytoplankton [a _ph(λ)], non-pigment particles and colored dissolved organic matter increased with increasing chlorophyll a concentration (Chl a), and those coefficients were correlated with Chl a for both red tide and non-red tide waters. Using these relationships between absorption coefficients and Chl a, variation in the spectrum of 1/a(λ) as a function of Chl a was calculated. The peak of 1/a(λ) shifted to longer wavelengths with increasing Chl a. Furthermore, the relative contribution of a _ph(λ) to the total absorption in red tide water was significantly higher than in non-red tide water in the wavelength range 550–600 nm, including the peak. Our results show that the variation of a _ph(λ) with Chl a dominates the behavior of the R _rs(λ) peak, and utilization of R _rs(λ) peaks at 589 and 565 nm may be useful to discriminate between red tide and non-red tide waters by remote sensing.