Responses of the polar ionosphere to the Bastille Day solar event

Simultaneous observations at Zhongshan Station, Antarctica, are presented for the interval of 13–17 July 2000 to show responses of the polar ionosphere to the Bastille Day (14 July 2000) solar event. The polar ionosphere was highly disturbed, as shown by frequently large deviations of the geomagnetic H-component, large riometer absorption events and strong ULF waves. Associated with the huge solar proton event produced by the X5/3B flare, a polar cap absorption (PCA) was observed. It began at ∼ 10:40 UT on 14 July and ended at ∼ 19:40 UT on 17 July. Superposed on it, there was a large absorption event with a peak of 26 dB, starting at ∼ 03:00 UT and ending at ∼ 11:10 UT on 15 July. This kind of absorption was probably produced by an intense `cloud of energetic electrons' during an auroral substorm. The ULF waves were very intense during the main phase and the recovery phase of the severe magnetic storm on 15 and 16 July. The ionospheric absorption was so strong that the digisonde signal was blacked out most of the time. The ionosphere returned to normal in the afternoon on 17 July.     

Physical Meaning of Stress Difference for Fault-Slip Analysis

Recent stress tensor inversion methods for fault-slip analysis are used to distinguish between multiple stress states to elucidate spatiotemporal change of the earth’s crustal tectonics. An estimator named the stress difference has been a practicable tool to measure the difference between stress solutions of inversion analysis. This measure corresponds to the expected difference in shear stress direction on a randomly oriented fault plane, which is, however, an approximation including several degrees of deviation. This study investigated the formula of stress difference and found the exact physical meaning, specifically the expected difference in shear stress vector which carries information on magnitude as well as direction. The present discovery is based on the analytical proportionality between the second invariant of stress tensor and the root mean square magnitude of shear stress for all orientation of fault planes. The meaningless difference in non-dimensional shear stress magnitude was found to be incorporated into the value of stress difference. This fact is not convenient for fault-slip analysis dealing only with orientations.     

Effect of hydrostatic pressure on the lattice parameters of Fe2SiO4 olivine up to 70 kbar

The pressure dependence of the three lattice parameters and unit cell volume of fayalite (Fe₂SiO₄ olivine) was determined by X-ray diffraction under hydrostatic pressures up to 70 kbar. In order to eliminate stress inhomogeneity within a composite material consisting of a specimen mixed with an internal-pressure standard, a liquid (1 : 1 mixture of ethanol and methanol) was used as a pressure-transmitting medium. The isothermal bulk modulus calculated on the basis of the second-order Birch-Murnaghan equation of state gives the values K₀ = 1.19 ± 0.10 Mbar and K₀′ = 7 ± 4, and if we assume K₀′ = 5: K₀ = 1.24 ± 0.02 Mbar. Three axes of fayalite were found to be compressible in the following order, b >c >a. Comparisons with the results obtained under non-hydrostatic compression are made.     

Application of Convergence Confinement Analysis to the study of preceding displacement of a squeezing rock tunnel

Summary This paper deals with a study on the geomechanical behavior of the rock mass around the tunnel. The Convergence Confinement Analysis is one of the most appropriate way to estimate this behavior. Elasto-plastic models proposed by Hoek and Brown, Egger and Kastner were adopted in this study.Measurements of the preceding displacement were performed in a road tunnel in Japan, the geology of which is Neogene squeezing mudstone. The measured data was compared with the results of Convergence Confinement Analysis.The preceding displacement was about 40% against the upper bench face converged displacement and 17% against the final converged displacement. Meanwhile, it increased drastically in lower bench excavation step.Back analysis was also executed to calculate the extension of the plastic zone of the rock mass, which was half of that estimated by Convergence Confinement Analysis in upper bench excavation step. But, in lower bench excavation step, the results of the two analyses were very similar. The support pressure and support stiffness were also calculated.     

A computational procedure for joining separate map sheets

Map sheets have been often used as a basic spatial unit for managing spatial data produced from paper maps. This often results in incompatibility between adjacent map sheets, because spatial objects do not cross the boundaries smoothly and even the boundaries themselves do not match their neighbors exactly. To solve the problem this paper proposes a computational procedure for joining separate map sheets to obtain seamless spatial data. Line objects digitized separately in different map sheets are considered, which are frequently used to represent road networks, gas pipelines, and boundaries of polygon objects. The procedure consists of three steps: (1) extraction of end nodes, (2) detection of matching nodes, and (3) transformation of the map sheet. Each step goes interactively so that unexpected errors can be avoided by human observation. To test the validity of the procedure, map sheets are combined containing the road network data of Tokyo 23-ku area, Japan. This revised version was published online in July 2006 with corrections to the Cover Date.     

Characteristics of Triassic epithermal Au mineralization at the Q prospect,Chatree mining area,Central Thailand

The Chatree deposit is located in the Loei‐Phetchabun‐Nakhon Nayok volcanic belt that extends from Laos in the north through central and eastern Thailand into Cambodia. Gold‐bearing quartz veins at the Q prospect of the Chatree deposit are hosted within polymictic andesitic breccia and volcanic sedimentary breccia. The orebodies of the Chatree deposit consist of veins, veinlets and stockwork. Gold‐bearing quartz veins are composed mainly of quartz, calcite and illite with small amounts of adularia, chlorite and sulfide minerals. The gold‐bearing quartz veins were divided into five stages based on the cross‐cutting relationship and mineral assemblage. Intense gold mineralization occurred in Stages I and IV. The mineral assemblage of Stages I and IV is characterized by quartz–calcite–illite–laumontite–adularia–chlorite–sulfide minerals and electrum. Quartz textures of Stages I and IV are also characterized by microcrystalline and flamboyant textures, respectively. Coexistence of laumontite, illite and chlorite in the gold‐bearing quartz vein of Stage IV suggests that the gold‐bearing quartz veins were formed at approximately 200°C. The flamboyant and brecciated textures of the gold‐bearing quartz vein of Stage IV suggest that gold precipitated with silica minerals from a hydrothermal solution that was supersaturated by boiling. The δ¹⁸O values of quartz in Stages I to V range from +10.4 to +11.6‰ except for the δ¹⁸O value of quartz in Stage IV (+15.0‰). The increase in δ¹⁸O values of quartz at Stage IV is explained by boiling. P_H2O is estimated to be 16 bars at 200°C. The f_CO2 value is estimated to be 1 bar based on the presence of calcite in the mineral assemblage of Stage IV. The total pressure of the hydrothermal solution is approximately 20 bars at 200°C, suggesting that the gold‐bearing quartz veins of the Q prospect formed about 200 m below the paleosurface.     

Internal Microanatomy and Zoological Affinity of the Early Cambrian Olivooides

The early Cambrian pentamerous microfossil Olivooides/Punctatus in South China, which is characterized by a diagnostic stellate tubular apex, has been well-known for its almost complete development sequence that can be confidently traced from embryos and hatched juveniles, to conical adults. However, its zoological affinity remains highly controversial. Here we describe the internal microanatomic structures of the soft-body inside the peridermal theca of Olivooides multisulcatus Qian, 1977, including interradial pairs of tentacles, adradial and perradial frenula, perradial oral marginal lappets and twins of perradial gastric saccule-like humps as well as a circular velarium with striated coronal muscles. Particularly, one specimen shows bifurcated velarial canals along the bell aperture. Both the components of the soft-body and the external theca (or cyst) are arranged in perfect pentaradial symmetry. These characteristics are more compatible with those of living cubomedusans and co-occurring Cambrian athecate embryonic cubozoans. Concerning the presence of peridermal theca, Olivooides most likely represents an extinct thecate stem-group cubomedusae but devoid of both perradial eyes and specialized pedalia. The well-grown soft body inside the peridermal tube displays a set of mixed features of both polyp and medusa.     

Ground subsidence in Semarang-Indonesia investigated by ALOS–PALSAR satellite SAR interferometry

The focus of this study is investigation of land subsidence in Semarang city Indonesia with the use of Interferometry Synthetic Aperture Radar (InSAR) of ALOS–PALSAR satellite. We processed 22 ascending SAR images during January 2007 to January 2009 plus two descending SAR images acquired on 6 June 2006 and 17 June 2007. The time series analysis of interferometry was performed by using 12 pairs of interferogram relative to 21 January 2007 and 8 pairs of interferogram relative 24 January 2008. The topographic phase contribution was removed using the 3-arcsec (90 m) Shuttle Radar Topography Mission (SRTM), Digital Elevation Model (DEM). We performed precision baseline estimation to vanish the fringes from baseline effect between master and slave data. In order to investigate the contribution of horizontal movement in our analysis, we constructed two interferograms of ascending orbit and descending orbit. The time series results exhibited that the area is subsiding continuously without a significant seasonal effect during January 2007 to January 2009. The land subsidence observed from InSAR data is approximately up to 8 cm/year. Three cross sections on image displacement show the extreme land subsidence occurred especially along the coastal area and lowland area where this area is considered as industrial with high-density settlements, consuming a lot of groundwater, and land is changed from agriculture and cultivation purposes to industrial estates and house. Our result also shows a consistency with historical pattern of subsidence measured by leveling data. The results highlight the potential use of InSAR measurements to provide better constraints for land subsidence in Semarang city Indonesia.     

Cation disorder in garnets along the Mg3Al2Si3O12-Mg4Si4O12 join: an infrared,Raman and NMR study

We have obtained infrared and Raman spectra for garnets synthesized at high (static) pressures and temperatures along the join Mg₃Al₂Si₃O₁₂ (pyrope) — Mg₄Si₄O₁₂ (magnesium majorite). The vibrational spectra of Mg-majorite show a large number of additional weak peaks compared with the spectra of cubic pyrope garnet, consistent with tetragonal symmetry for the MgSiO₃ garnet phase. The Raman bands for this phase show no evidence for line broadening, suggesting that Mg and Si are ordered on octahedral sites in the garnet. The bands for the intermediate garnet compositions are significantly broadened compared with the end-members pyrope and Mg-majorite, indicating cation disorder in the intermediate phases. Solid state ²⁷Al NMR spectroscopy for pyrope and two intermediate compositions show that Al is present only on octahedral sites, so the cation disorder is most likely confined to Mg-Al-Si mixing on the octahedral sites. We have also obtained a Raman spectrum for a natural, shock-produced (Fe,Mg) majorite garnet. The sharp Raman peaks suggest little or no cation disorder in this sample.     

Postglacial stratigraphic evolution of a current-influenced sandy shelf: offshore Kujukuri strandplain,central Japan

Sandy shelf sediments are important elements of clastic sedimentary systems because of their wide distribution in the geological record and their significance as hydrocarbon reservoirs. Although many studies have investigated shelf sediments influenced by waves or tidal currents, little is known about shelf sediments influenced by oceanic currents, particularly their lithofacies characteristics and stratigraphic evolution. This study investigated the stratigraphic evolution of shelf sediments off the Kujukuri strandplain facing the Pacific Ocean, which is influenced by the strong Kuroshio Current. Sediment cores were obtained from six locations on the Kujukuri shelf (34 to 124 m water depth) using a vibrocorer. The dominant lithofacies is mud-free sand with low-angle cross-lamination associated with alternating beds of finer and coarser sand with cross-lamination. These display depositional processes influenced by storm waves and the Kuroshio Current, respectively. This finding is consistent with the previously presented modern and historical observations of the Kuroshio Current and estimates of the storm-wave base. Radiocarbon dates show that the sediment succession formed during the last transgressive and highstand stages after 13·1 ka. The depositional processes during the stages represent a transition from storm waves with abundant sediment supply to both storm waves and the Kuroshio Current with sediment starvation mainly due to its trapping in the strandplain. Comparison to other Holocene–Modern shelf systems suggests that the sandy shelf successions are strongly influenced by oceanic currents under conditions of limited riverine input and open coastal geometry. The resultant sand-dominated succession is characterized by reversal of the proximal to distal grain-size trend compared to the fining for most other recognized wave/storm-dominated shelf successions. This is because of seaward increase in the influence of the Kuroshio Current. Thus, shelf deposits are naturally complex, and these may be further complicated by the additional influence of oceanic currents above the usual wave-dominated and tide-dominated end members.