Ability of indigenous Bacillus licheniformis and Bacillus subtilis in microbial enhanced oil recovery

Microbially produced lipopeptide have been isolated and studied for microbial enhanced oil recovery. About 60 gram positive bacteria isolated from soil contaminated with crude oil, near the crude oil storage tank in Tehran Refinery, Tehran, Iran. However, most of these studies have produced lipopeptide by one of the pure-culture microbes isolated in a laboratory. Among the isolates, heamolytic tests revealed two biosurfactant producers. The isolated strains were designated as C2, E1. By using morphological, biochemical and molecular biology tests (16 SrRNA), the strains identified as Bacillus licheniformis and Bacillus subtitlis, respectively. Emulsification activity and measurement of surface tension indicated that, the isolates were high producers of biosurfactant. The product of C2 and E1 is mainly lipopeptide. This product reduce surface tension from 65 to 30 mN/m. Emulsified activity of crude oil was 92% for C2 and 90 % in case of E1. This is the first report of indigenous Bacillus licheniformis and Bacillus subtilis from a soil contaminated with oil in an Iranian refinery with ability to produce biosurfactant.     

Influence of biotic-abiotic factors on the degradation of novaluron in tropical soil

In this study, the degradation of novaluron (benzoylphenyl urea insect growth regulator) was investigated under controlled laboratory conditions in clay loam alluvial and coastal saline soils of West Bengal, India. The application rates were field rate (FR); 2FR and 10FR. The incubation study was carried out at 30 °C and 60% of maximum water holding capacity of both the soils. Degradation of novaluron in both the soils followed first order reaction kinetics at all application rates under non-sterile and sterile conditions. The half-lives of novaluron in non-sterilized soils ranged from 17.0–17.8 days (alluvial soil) and 11.4–12.7 days (coastal saline soil), while the values in case of the sterilized soils were 53.7–59.0 days (alluvial soil) and 28.9–29.8 days (coastal saline soil) respectively. The novaluron degradation patterns were found to be highly influenced by soil types, application rates, and biotic abiotic factors. Abiotic factors strongly influenced novaluron degradation in both the soils. Biotic degradation was higher in alluvial soil compared to the coastal saline soil.     

A combined mathematical geophysical model for prediction of pyrite oxidation and pollutant leaching associated with a coal washing waste dump

The waste produced by coal washing process produces many environmental problems. In this study, the pollution problems associated with the waste produced by Alborz Sharghi Coal Washing Plant was investigated by mathematical modeling. The study area is located at 11 km. to Razmjah coal region and 45 km. to Tehran-Mashhad road in the north part od Iran. To achieve the goal, a few samples were taken from different depths at three points on the waste dump in order to investigate pyrite oxidation and pollution generation. The samples were then analysed, using an AA-670 Shimadzu atomic absorption to determine the fraction of pyrite remained within the waste particles. A numerical finite volume model using Phoenics package has been developed to simulate pyrite oxidation and pollution generation from the Alborz Sharghi coal washing waste dump. The pyrite oxidation reaction is described by the shrinking-core model. Gaseous diffusion is the main mechanism for the transport of oxygen through the waste. The results of numerical modelling were compared with the field observations and close agreement was achieved. A simple mathematical model incorporating advection and hydrodynamic dispersion processes was also presented in order to verify the results of geophysical time-laps method showing transportation of the pollutants through the downstream of the waste dump. Both mathematical model and geophysical time-laps method are agreed in the identification of pollutant transport emanated from the waste dump. The results of such investigations can be used for designing an effective environmental management program.     

First finds of Late Tithonian and middle-late Albian radiolarian assemblages in volcanogenic-siliceous rocks of the Amur River right lower reaches and their tectonic significance

The lithological-stratigraphic study of volcanogenic-siliceous rocks developed on the left side of the Machtovaya River, a right tributary of the Amur River, yielded the first radiolarian assemblages of the late Late Tithonian, the late Late Tithonian-early Valanginian, and the middle-late Albian age. It is established that the stratigraphic succession of volcanogenic-siliceous rocks in this area is composed of upper Tithonian-Valanginian dark red to red-brown cherts with basalts in the lower part of the section and Albian dark gray clayey cherts, olive-gray siliceous-tuffaceous argillites, and tufaceous siltstones in its upper part. The replacement of cherts by their clayey varieties likely occurred in the Aptian. The composition, structure, and age of these strata and the rocks constituting the Kiselevka-Manoma accretionary complex are different, which indicates their different tectonic origin.     

Paleomagnetic studies of the Late Mesozoic deformation stage in the southern Primorye region

The analysis of paleomagnetic data available for the southern Primiorye region revealed that the studied objects were magnetized under regional remagnetization presumably during the Late Mesozoic folding and this magnetization can be interpreted as being synfolding. The interpretation is based on the parameter that characterizes the folding completion degree immediately before regional remagnetization. It is shown that the relaxation of Late Mesozoic horizontal stresses was irregular. The obtained estimates of the degree of folding completion are consistent with the available geological data and Talitskii’s model for tectonic deformations.     

Automated Kerogen Classification in Microscope Images of Dispersed Kerogen Preparation

We develop the classification part of a system that analyses transmitted light microscope images of dispersed kerogen preparation. The system automatically extracts kerogen pieces from the image and labels each piece as either inertinite or vitrinite. The image pre-processing analysis consists of background removal, identification of kerogen material, object segmentation, object extraction (individual images of pieces of kerogen) and feature calculation for each object. An expert palynologist was asked to label the objects into categories inertinite and vitrinite, which provided the ground truth for the classification experiment. Ten state-of-the-art classifiers and classifier ensembles were compared: Naïve Bayes, decision tree, nearest neighbour, the logistic classifier, multilayered perceptron (MLP), support vector machines (SVM), AdaBoost, Bagging, LogitBoost and Random Forest. The logistic classifier was singled out as the most accurate classifier, with an accuracy greater than 90. Using a 10 times 10-fold cross-validation provided within the Weka software, we found that the logistic classifier was significantly better than five classifiers (p<0.05) and indistinguishable from the other four classifiers. The initial set of 32 features was subsequently reduced to 6 features without compromising the classification accuracy. A further evaluation of the system alerted us to the possible sensitivity of the classification to the ground truth that might vary from one human expert to another. The analysis also revealed that the logistic classifier made most of the correct classifications with a high certainty.     

Influence of initial plastic anisotropy of overconsolidated clays on ground behaviour during tunneling

In order to evaluate the influence of the initial plastic anisotropy in the excavation of a tunnel, a “bubble” bounding surface model for structured soils, formulated by Kavvadas and Belokas (Proc. 10th IACMAG Conf., 2001), was implemented in the explicit finite difference code FLAC. Two different initial stress (K ₀) conditions were considered. The size and shape of the initial bounding surfaces were specified to be consistent with the initial stress field. The distorted and rotated shape of the bounding surface, supported by experimental results, defines the anisotropy of shear strength, which is shown to have a significant influence on the displacements. There is also considerable sensitivity of the soil model to the initial stress field.     

On the use of gravity and magnetic anomalies for locating probable areas of metallic mineralization in South Sinai, Egypt

The present study deals with processing and interpreting the potential gravity and magnetic data in order to locate promising sites for metallic mineral occurrences in the basement rocks of South Sinai. Two promising sites were anticipated by combining the geophysical results and the available geological information. Each site was profiled and interpreted to the nearly approximated subsurface feature model, and the geometrical parameters of the expected subsurface structures may form mineralized bodies such as depth, thickness, width, dipping, density contrast, and magnetic susceptibility contrast could be delineated. Detailed ground Very Low Frequency (VLF) and Vertical Magnetic Gradient (VMG) methods were carried out in the site A2, eight VLF and VMG anomalies were determined, and their depths were calculated.     

Microlites and "nanolites" in rhyolitic glass: microstructural and chemical characterization

 We used transmission electron microscopy (TEM) and scanning electron microscopy (SEM) to study magmatic crystals in the Ben Lomond rhyolite lava dome, Taupo Volcanic Center, New Zealand. Using TEM and SEM to investigate the size distributions of these crystals, we identified three size populations: microphenocrysts (>1.2 μm wide), microlites (>0.6 μm wide), and smaller crystals (<0.6 μm wide) which we term "nanolites". The predominant mineral phases of the microlites and nanolites are augites, pigeonites, and hypersthenes. The compositions and microstructures within these pyroxenes indicate disequilibrium crystallization at approximately 850–900  °C and undercoolings as high as 300  °C from equilibrium crystallization temperatures. Complex microstructures resulting from subsolidus reactions in augite and pigeonite are consistent with moderate cooling rates within the upper obsidian layer of the Ben Lomond rhyolite dome. This study demonstrates the existence of sub-micron magmatic crystals in a rhyolite and illustrates the potential of TEM to provide unique information about the crystallization and cooling histories of glassy volcanic rocks. Received: May 8, 1995 / Accepted: November 27, 1995     

LREE distribution in perovskite,apatite and titanite from South West Ugandan xenoliths and kamafugite lavas

Summary In-situ microprobe LREE analyses of perovskite and titanite (La, Ce, Nd), and apatite (La, Ce), from SW Ugandan clinopyroxenite xenoliths and kamafugite lavas indicate that LREE distribution in these minerals is determined by a number of factors related to their different parageneses: In particular LREE content is affected by whether the LREE-bearing minerals have crystallised from metasomatic carbonate or from silicate (i.e. metasomatic or magmatic) melts in the mantle. In this situation LREE partition favours carbonate over silicate melts. Distribution of LREE in perovskite and apatite crystallised from magmatic mantle melts or mantle-derived lavas is chiefly determined by preference of LREE for perovskite > apatite > titanite. LREE zoning in perovskite is influenced by changes in melt structure: increasing melt polymerisation enhancing mineral_LREE/melt_LREE partition into perovskite rims in magmatic xenoliths; decreasing melt polymerisation depleting LREE in lava perovskite rims. This zoning is reinforced by perovskite competition with apatite for LREE: perovskite (cores/rims) co-crystallising with apatite is reduced in LREE. There are 37 instances of perovskitewith Ce below detection while La and Nd levels are normal. These occur in both xenoliths and lavas; in grain zones or whole grains. Likewise Ce alone of the LREE is below detection in six out of ten titanite analyses. These observations are interpreted as evidence for increased f_{O 2}, Ce⁴ + being excluded from these mineral structures. Recognition of these various processes can elucidate the interpretation of bulk rock and bulk mineral LREE signatures in kamafugite volcanism.

---

LREE Verteilung in Perovskit, Apatit und Titanit aus Xenolithen und kamafugitischen Laven Südwest-Ugandas

Zusammenfassung In-situ LREE Analysen von Perovskit und Titanit (La, Ce, Nd) und Apatit (La, Ce) aus Klinopyroxenit-Xenolithen und kamafugitischen Laven Südwest-Ugandas zeigen, daß die LREE Verteilung in diesen Mineralen durch eine Vielzahl von Faktoren, die mit Unterschieden in den Paragenesen zusammenhängen, bestimmt wird: Der LREE-Gehalt wird im besonderen davon bestimmt, ob die LREE-führenden Minerale aus metasomatischen Karbonat- oder aus (metasomatischen oder magmatischen) Silikatschmelzen im Mantel auskristallisierten. Dabei erfolgt die LREE Fraktionierung zu Gunsten der Karbonatschmelzen. Die LREE-Verteilung von Perovskit und Apatit, die aus magmatischen Mantelschmelzen oder -laven kristallisierten, wird vorrangig durch den bevorzugten Einbau der LREE in Perovskit > Apatit > Titanit kontrolliert. Der LREE Zonarbau von Perovskit wird durch die Änderungen der Schmelzstruktur beinflußt: Verstärkte Schmelzpolymerisation führt zu verstärkter Mineral_LFEE/Schmelze_LREE Fraktionierung in den Perovskiträndern magmatischer Xenolithe, eine Abnahme der Schmelzpolymerisation hingegen resultiert in einer Abreicherung der LREE in den Perovskiträndern. Diese Art der Zonierung wird durch den Wettbewerb von Perovskit mit Apatit um die LREE verstärkt. Perovskit (Kerne/Ränder), der mit Apatit gemeinsam auskristallisierte, ist ärmer an LREE. 37 Fälle, in denenCe nicht nachweisbar war, La und Nd aber in normaler Konzentration auftreten, wurden sowohl in den Xenolithen als auch in den Laven gefunden; und zwar entweder in Kornbereichen oder in ganzen Körnern. Vergleichsweise liegt Ce nur in sechs von zehn Titanitproben unterhalb der Nachweisgrenze. Diese Beobachtungen werden als Hinweise auf erhöhte SauerstoffFugazitäten, bei denen Ce^4– aus der Mineralstruktur ausgeschlossen wird, angesehen.Ein Verständnis dieser verschiedenen Prozesse kann zur besseren Interpretation von LREE Gesamtgesteins- und Gesamtmineral-Signaturen in Kamafugiten beitragen.

---

---

With 3 Figures