Tectonic incorporation of the upper part of oceanic crust to overriding plate of a convergent margin: An example from the Cretaceous–early Tertiary Mugi Mélange, the Shimanto Belt, Japan

A tectonic mélange exposed on land is examined to reveal relationships between mélange formation, underplating, and deformation mechanisms, focusing on the deformation of basaltic rocks. The studied Mugi Mélange of the Shimanto Belt is composed of a shale matrix surrounding various blocks of sandstone, pelagic sediments, and basalts. The mélange was formed during Late Cretaceous to early Tertiary times in a subduction zone under P–T conditions of 150–200 °C and 6–7 km depth as estimated from vitrinite reflectance and quartz veins fluid inclusions. The mélange represents a range of deformation mechanisms; pressure solution with micro-scale cataclasis in the shale matrix, brittle tension cracking in the blocks, and ubiquitous strong cataclasis in the basal portion of basaltic layers. The cataclastic deformation in the basalts suggests a breakage of a topographic high in the seismogenic depth.     

Hahajima Seamount: An enigmatic tectonic block at the junction between the Izu–Bonin and Mariana Trenches

Abstract   The Hahajima Seamount, located at the junction between the Izu–Bonin and Mariana forearc slopes, is a notable rectangular shape and consists of various kinds of rocks. An elaborated bathymetric swath mapping with geophysical measurements and dredge hauls showed the Hahajima Seamount is cut by two predominating lineaments, northeast–southwest and northwest–southeast. These lineaments are of faults based on the topographic cross-sections and a 3-D view (whale's eye view). The former lineament is parallel to the transform faults of the Parece Vela Basin, whereas the latter is parallel to the nearby transform fault on the subducting Pacific Plate. The rocks constituting the seamount are ultramafic rocks (mostly harzburgite), boninite, basalt, andesite, gabbro, breccia and sedimentary rocks, which characterize an island arc and an ocean basin. Gravity measurement and seismic reflection survey offer neither a definite gravity anomaly at the seamount nor definite internal structures beneath the seamount. A northwest–southeast-trending fault and small-scale serpentine flows were observed during submersible dives at the Hahajima Seamount. The rectangular shape, size of the seamount, various kinds of rocks and geophysical measurements strongly suggest that the Hahajima Seamount is not a simple serpentine seamount controlled by various tectonic movements, as previously believed, but a tectonic block.     

Characteristics of alkenone distributions in suspended and sinking particles in the northwestern North Pacific

We investigated alkenones recorded in suspended particles and a settling particle time series collected at three stations, 40N (40°N, 165°E), KNOT (44°N, 155°E), and 50N (50°N, 165°E), in the northwestern North Pacific from December 1997 to May 1999. Emiliania huxleyi, the most abundant alkenone producer in this area, is present in surface to subsurface (to ∼50 m depth) waters. The alkenone concentrations recorded in the suspended particles indicated that the seasonal alkenone particle distribution differed significantly interannually. Alkenone export fluxes at the three sediment-trap stations ranged from 0.16 to 49.3 μg m⁻² day⁻¹, and the maximum export flux, which occurred in summer to fall (July-November), was associated with a high organic carbon export flux. The amount of alkenone produced during the maximum export season accounted for 60-80% of the total annual amount of alkenone, and the alkenones accumulated in the sediment below the traps had characteristics corresponding to subsurface waters during the summer-autumn season. Alkenone-derived temperatures recorded in suspended particles corresponded to the in situ temperature within ∼2 °C. Although alkenone-derived temperatures corresponded approximately to the temperatures observed in the stratified subsurface waters at the three trap stations during the high-export season, large differences were observed during the low-export (winter-spring) period. For example, the alkenone-derived temperatures observed at stations KNOT and 50N were much higher than the in situ subsurface temperatures reported in the World Ocean Atlas 2001. Relatively large differences between alkenone-derived temperatures and in situ temperatures in the subarctic might be due to (1) a low-light limitation or (2) contributions of allochthonous alkenones in particulate material transported from subtropical areas within a warm-core ring.     

Using VLBI fringe-phase information from geodetic experiments for short-period ionospheric studies

The usage of Very Long Baseline Interferometry (VLBI) fringe-phase information in geodetic VLBI is a new field of research, which can be used for the detection of short-period (i.e., several minutes) variations (scintillations) of the ionosphere. This paper presents a method for the extraction of such disturbances and discusses how dispersive influences can be separated from intra-scan delay variations. A proper functional and stochastic model for the separation of the different effects is presented and the algorithms are applied to real measurements. In an example, it is shown that a traveling ionospheric disturbance in Antarctica can be detected very precisely. A possible physical origin and the propagation properties of the disturbance are presented and the results are compared with GPS measurements. The benefit of this method for other applications is also discussed.     

Discrete‐like crack simulation by smeared crack‐based FEM for reinforced concrete

A numerical process that simulates crack propagation in reinforced concrete through post‐crack stress redistribution is presented. This process is developed within the context of the smeared crack approach. Continuity and orientation of the reinforcing bar components are automatically recognized in the pre‐processing stage. The process explicitly outputs crack widths by computing the bond slips along reinforcement, without imposing any additional nodes between the reinforcement and concrete. The process is incorporated with a finite element algorithm, and the validation is investigated through sample 3D static analyses of nine concrete specimens subjected to monotonic shear and flexure loads. These specimens contain relatively well‐distributed steel bars and fiber reinforced polymer (FRP) sheets of reinforcement ratio from 0.11 to 0.57%. The analyses predict the crack patterns and crack widths well, although some disagreements are found between the test and the analysis results. The proposed process outputs discrete, continuous in crack directions, and element boundary‐free crack patterns. Copyright © 2007 John Wiley & Sons, Ltd.     

Viscosity measurements of subliquidus magmas: Alkali olivine basalt from the Higashi-Matsuura district, Southwest Japan

We carried out viscosity measurements and sampling of a crystal suspension derived from alkali olivine basalt from the Matsuura district, SW Japan, at subliquidus temperatures from 1230 °C to 1140 °C under 1 atm with NNO oxygen buffered conditions. Viscosity increased from 31 to 1235 Pa s with a decrease in temperature from 1230 to 1140 °C. On cooling, olivine first appeared at 1210 °C, followed by plagioclase at 1170 °C. The crystal content of the sample attained 31 vol.% at 1140 °C (plagioclase 22%, olivine 9%). Non-Newtonian behaviors, including thixotropy and shear thinning, were pronounced in the presence of tabular plagioclase crystals. The cause of such behavior is discussed in relation to shear-induced changes in melt–crystal textures. Relative viscosities, η_r (= η_s / η_m, where η_s and η_m are the viscosities of the suspension and the melt, respectively), were obtained by calculating melt viscosities from the melt composition and temperature at 1 atm using the equation proposed by Giordano and Dingwell [Giordano, D., Dingwell, D.B., 2003. Non-Arrhenian multicomponent melt viscosity: a model. Earth and Planetary Science Letters, 208, 337–349.]. The obtained relative viscosities are generally consistent with the Einstein–Roscoe relation, which represents η_r for suspensions that contain equant and equigranular crystals, even though the crystal suspension analyzed in the present experiments contained tabular plagioclase and granular olivine of various grain sizes. This consistency is attributed to the fact that the effect of crystal shape was counterbalanced by the effect of the dispersion of crystal size. The applicability of the Einstein–Roscoe equation with respect to crystal shape is discussed on the basis of the present experimental results. Our experiments and those of Sato [Sato, H., 2005. Viscosity measurement of subliquidus magmas: 1707 basalt of Fuji volcano. Journal of Mineralogical and Petrological Sciences, 100, 133–142.] show that the relationship between relative viscosity and crystal fraction is consistent with the Einstein–Roscoe relationship for axial ratios that are smaller than the critical value of 4–6.5, but discrepancies occur for higher ratios.     

Dynamic behaviour and identification of non-uniform ground by the discrete wave number method

Powell's method for minimizing a function of several variables without calculating derivatives is applied to recorded earthquake motion on the ground surface to identify ground characteristics that have irregular profiles. The identifications are made by designating the shear wave velocity depth and width of the irregularity of surface ground as unknown parameters and are based on the least square fit between the amplitude of the transfer function determined from accelerograms recorded at two observation sites and the corresponding transfer function calculated from the response analysis of a ground model. The discrete wave number method is used to analyze the response of ground with a non-uniform profile for the incidence of SH waves. The effect of the initial assumed values on the convergence is studied by evaluating the square error between the theoretical transfer function and that calculated from the parameters identified. The dispersive trend found for the accelerograms is explained by the calculated response of a ground model with a non-uniform profile.     

Separation and sliding between soil and structure during strong ground motion

This paper presents an approach to the problem of separation and sliding between soil and structure in the finite element analysis of dynamic soil-structure interaction problems. Joint elements are arranged along the contact surface between soil and structure and they have a property such that tensile forces are not transmitted between the planes representing structure and soil in the finite element analysis. The dynamic properties governing the sliding are determined by the Mohr-Coulomb failure law determined from the cohesion and the friction angle between soil and structure. The proposed method is applied to (i) a model of a reactor building resting on the free surface of layered ground and (ii) a buried foundation structure. The numerical computations reveal the following results: that the translation is dominant in the motion of the structure when sliding is taking place between soil and structure, and that the rocking is dominant in the rest of the response. The amplitude of the response during sliding is increased on any one point of the structure and decreased on any one point of the ground compared with that of the fixed condition at the interface. In the case of the buried structure, it is observed in the computed results that the structure and soil move in the opposite direction along the vertical contact surface and are separated from each other in the near surface region during the strong phase of the excitation.     

Validating a regional climate model’s downscaling ability for East Asian summer monsoonal interannual variability

Performance of a regional climate model (RCM), WRF, for downscaling East Asian summer season climate is investigated based on 11-summer integrations associated with different climate conditions with reanalysis data as the lateral boundary conditions. It is found that while the RCM is essentially unable to improve large-scale circulation patterns in the upper troposphere for most years, it is able to simulate better lower-level meridional moisture transport in the East Asian summer monsoon. For precipitation downscaling, the RCM produces more realistic magnitude of the interannual variation in most areas of East Asia than that in the reanalysis. Furthermore, the RCM significantly improves the spatial pattern of summer rainfall over dry inland areas and mountainous areas, such as Mongolia and the Tibetan Plateau. Meanwhile, it reduces the wet bias over southeast China. Over Mongolia, however, the performance of precipitation downscaling strongly depends on the year: the WRF is skillful for normal and wet years, but not for dry years, which suggests that land surface processes play an important role in downscaling ability. Over the dry area of North China, the WRF shows the worst performance. Additional sensitivity experiments testing land effects in downscaling suggest the initial soil moisture condition and representation of land surface processes with different schemes are sources of uncertainty for precipitation downscaling. Correction of initial soil moisture using the climatology dataset from GSWP-2 is a useful approach to robustly reducing wet bias in inland areas as well as to improve spatial distribution of precipitation. Despite the improvement on RCM downscaling, regional analyses reveal that accurate simulation of precipitation over East China, where the precipitation pattern is strongly influenced by the activity of the Meiyu/Baiu rainfall band, is difficult. Since the location of the rainfall band is closely associated with both lower-level meridional moisture transport and upper-level circulation structures, it is necessary to have realistic upper-air circulation patterns in the RCM as well as lower-level moisture transport in order to improve the circulation-associated convective rainfall band in East Asia.     

A composite analysis of diurnal cycle of GPS precipitable water vapor in central Japan during Calm Summer Days

Summary The diurnal variations of water vapor in central Japan were investigated with GPS-derived precipitable water (PWV) and surface meteorological data as classified to three kinds of locations. Twenty-five clear days in central Japan in August 2000 were investigated to clarify the role of water vapor in the nocturnal maximum in the diurnal cycle of convective rainfall. The diurnal variations of PWV and some meteorological factors were composite during the selected days at 6 stations. The PWV shows a clear diurnal cycle with the amplitude of 3.4 mm to 8.8 mm and changes little during the period from the morning to noon. The daily amplitude of PWV is the largest in basin and smallest in plain although mean of PWV keeps high value in plain. A typical feature of the diurnal variation in central Japan is a maximum appearing in the evening. The time of maximum is from 1800 LST to 2000 LST, and minima appears at noon nearly in mountainous area and basin, while in early morning in plain. The diurnal maximum of PWV appears earlier in mountainous region than in plain. A diurnal cycle of specific humidity can be observed in all locations, and the amplitude in mountainous region is especially large compared with that in basin and plain. It is important to notice that there are remarkable differences in specific humidity among the six stations. The results suggest that the diurnal variation of PWV seems to be strongly affected by the local thermal circulations generated by the topography around these stations. The moisture transport causes the differences in phase of the diurnal cycle of PWV between different locations as well as the phase difference in precipitation. A very clear diurnal variation in surface air temperature is similar to that of solar radiation, with a minimum in the morning and a maximum in early afternoon. Maximum of surface wind speed are corresponded to peak of precipitation very well. It can be concluded that the amplitude of solar radiation increases with altitude as opposed to the situation of PWV generally. The precipitation observed frequently in the evening also shows a similar diurnal variation to that of the PWV, indicating the peak of precipitation appearing in late afternoon or in the evening over central Japan. Meanwhile the PWV reaches its nocturnal maximum. There is a good relationship between the diurnal cycle of observed precipitation and that of the PWV. Authors’ addressess: Guoping Li, Department of Atmospheric Sciences, Chengdu University of Information Technology, #3 Section 3, Ren Min Nan Road, Chengdu, Sichuan 610041, P.R. China; Dingfa Huang, Department of Surveying Engineering, Southwest Jiaotong University, Chengdu, China; Fujio Kimura, Tomonori Sato, Institute of Geoscience, University of Tsukuba, Tsukuba, Japan.