The metahyaloclastitic matrix of a unique metavolcanic block reveals subduction in the Somozas Mélange (Cabo Ortegal Complex,NW Iberia): tectonic implications for the assembly of Pangea

The allochthonous Cabo Ortegal Complex (NW Iberian Massif) contains a ~500 m thick serpentinite‐matrix mélange located in the lowest structural position, the Somozas Mélange. The mélange occurs at the leading edge of a thick nappe pile constituted by a variety of terranes transported to the East (present‐day coordinates; NW Iberian allochthonous complexes), with continental and oceanic affinities, and represents a Variscan suture. Among other types of metaigneous (calcalkaline suite dated at 527–499 Ma) and metasedimentary blocks, it contains close‐packed pillow‐lavas and broken pillow‐breccias with a metahyaloclastitic matrix formed by muscovite–paragonite–margarite–garnet–chlorite–kyanite–hematite–epidote–quartz–rutile. Pseudosection modelling in the MnCNTKFMASHO system indicates metamorphic peak conditions of ~17.5–18 kbar and ~550 °C followed by near‐isothermal decompression. This P–T evolution indicates subduction/accretion of an arc‐derived section of peri‐Gondwanan transitional crust. Subduction below the Variscan orogenic wedge evolved to continental collision with important dextral component. Closure of the remaining oceanic peri‐Gondwanan domain and associated release of fluid led to hydration of the overlying mantle wedge and the formation of a low‐viscosity subduction channel, where return flow formed the mélange. The submarine metavolcanic rocks were deformed and detached from the subducting transitional crust and eventually incorporated into the subduction channel, where they experienced fast exhumation. Due to the cryptic nature of the high‐P metamorphism preserved in its tectonic blocks, the significance of the Somozas Mélange had remained elusive, but it is made clear here for the first time as an important tectonic boundary within the Variscan Orogen formed during the late stages of the continental convergence leading to the assembly of Pangea.     

High-resolution sea wind hindcasts over the Mediterranean area

The goal of this study is to develop a high-resolution atmospheric hindcast over the Mediterranean area using the WRF-ARW model, focusing on offshore surface wind fields. In order to choose the most adequate model configuration, the study provides details on the calibration of the experimental saet-up through a sensitivity test considering the October–December 2001 period (the 2001 super-storm event in the West Mediterranean). A daily forecast outperforms the spectral technique of previous products and the boundary data from ERA-Interim reanalysis produces the most accurate estimates in terms of wind variability and hour-to-hour correspondence. According to the sensitivity test, two data sets of wind hindcast are produced: the SeaWind I (30-km horizontal resolution for a period of 60 years) and the SeaWind II (15-km horizontal resolution for 20 years). The validation of the resulting surface winds is undertaken considering two offshore observational datasets. On the one hand, hourly surface buoy stations are used to validate wind time series at specific locations; on the other hand, wind altimeter satellite observations are considered for spatial validation in the whole Mediterranean Sea. The results obtained from this validation process show a very good agreement with observations for the southern Europe region. Finally, SeaWind I and II are used to characterize offshore wind fields in the Mediterranean Sea. The statistical structure of sea surface wind is analyzed and the agreement with Weibull probability distribution is discussed. In addition, wind persistence and extreme wind speed (50 year return period) are characterized and relevant areas of wind power generation are described by estimating wind energy quantities.     

On the Construction of Bootstrap Confidence Intervals for Estimating the Correlation Between Two Time Series Not Sampled on Identical Time Points

Mathematical Geosciences - Two important issues characterize the design of bootstrap methods to construct confidence intervals for the correlation between two time series sampled (unevenly or...     

Ancient Forests in European drylands: Holocene palaeoecological record of Mazarrón,south-eastern Spain

This paper presents a new Holocene palaeoecological record from coastal south-eastern Spain, a region characterised by high plant species diversity, varied physiography, high risk of desertification, and a history of human pressure on the landscape that stretches to antiquity. The pollen sequence shows four main vegetation phases: the first characterised by mixed forests of Pinus and evergreen Quercus accompanied by broad-leaved mesophilous trees, and a diversity of Mediterranean scrub; the second phase is characterised by mesophytic decline and expansion of Artemisia; a third, mid-Holocene phase of thermo-mesophytic maxima with prevalence of forested landscapes; and, finally, the progressive opening of the landscape with sparse pines, halo-xerophytic grasslands and sclerophyllous brushwood. The current treeless situation of south-eastern Spain is a relatively recent feature resulting from a dramatic change in the ecological structure of the regional landscapes. This paper stresses the continued vulnerability of these arid systems in the face of a changing climate. This sequence adds to previous palaeobotanical records (pollen and charcoal) and archaeological reports to suggest that deforestation started earlier in low-elevation areas and river basins than in the inland mountains and platforms, a factor that appears in connection to human exploitation of the natural environment.     

S-type granite generation and emplacement during a regional switch from extensional to contractional deformation (Central Iberian Zone,Iberian autochthonous domain,Variscan Orogeny)

International Journal of Earth Sciences - Zircon grains extracted from S-type granites of the Mêda-Escalhão-Penedono Massif (Central Iberian Zone, Variscan Orogen) constrain the timing of...     

Moho depth determination beneath the Zagros Mountains from 3D inversion of gravity data

Due to its geological and economic importance, the Zagros Mountains have been investigated by many researchers during the last decades. Nevertheless, in spite of all the studies conducted on the region, there are still some controversial problems concerning the structure of the Zagros Mountains, including crustal depths, demanding more insights into understanding the crustal constraints of the region. Accordingly, we have conducted a gravity study to determine Moho depth map of the Zagros Mountains region, including its major structural domains from the coastal plain of the Persian Gulf to central Iran. The employed data are the densest and most accurate terrestrial gravity data set observed until now with the precision of 5 μGal and resolution of 5 arc-minute by 5 arc-minute. To image Moho depth variations, gravity inversion software GROWTH2.0 is used, proposing the possibility to model stratified structures by means of a semi-objective exploratory 3D inversion approach. The obtained results reveal the crustal thickness of ~?30–35 km underneath the southwestern most Zagros Fold-Thrust Belt increasing northeastward to 48 km. The maximum Moho depth is estimated ~?62 km below the Zagros Mountains belt along the Main Zagros Thrust. Northeast of the study area, an average crustal thickness of 46 km is computed beneath Urumieh–Dokhtar magmatic arc and central Iran.     

Development of a methodological approach for the accurate measurement of slope changes due to landslides,using digital photogrammetry

This paper presents a method for studying recent landscape evolution due to mass movements. The method presented employs digital photogrammetric techniques, combined with global positioning system (GPS) measurements, to analyse landslide features depicted in aerial images taken by ad hoc and historical flights. The method was applied and validated in a 7 -km² area, located on a south-facing slope of a tributary of the Pas River (Cantabrian Range, Spain). In this area many landslide deposits and features are present, dated from 120,000  years BP to the present. The method starts with the design and carrying out of an ad hoc flight to take 1:5,000 photographs to be used as a reference, using different aircraft devices to control the position and geometry of the photograms. Different ground control points (GCPs) were measured using GPS techniques to support the geomorphological and photogrammetric work. Reference and historical photograms were digitised in a photogrammetric scanner and the digital images and GCPs were incorporated into a digital photogrammetric workstation to generate the reference digital stereo models by aerotriangulation. The models generated have a precision of 21 cm for the reference images and 33 cm for the historical images. The obtained landslide maps were compared with traditional geomorphological maps and an increased precision in the volume and area measurements was confirmed. Backward crown displacements show rates for the last 15 years of 15 mm year^?1. Mass involved in landslide mobility rates in recent landslides are 440  tons.     

2D viscoplastic finite element modelling of slow landslides: the Portalet case study (Spain)

This paper proposes a hydro-geomechanical finite element model to reproduce the kinematic behaviour of large slow landslides. The interaction between solid skeleton and pore fluids is modelled with a time dependent u–p _w formulation and a groundwater model that takes into account recorded daily rainfall intensity. A viscoplastic constitutive model based on Perzyna’s theory is applied to reproduce soil viscous behaviour and the delayed creep deformation. The proposed model is applied to Portalet landslide (Central Spanish Pyrenees). This is an active paleo-landslide that has been reactivated by the construction of a parking area at the toe of the slope. The stability analysis reveals that, after the constructive solutions were undertaken, the slope is in a limit equilibrium situation. Nevertheless, time-dependent analysis reproduces the nearly constant strain rate (secondary creep) and the acceleration/deceleration of the moving mass due to hydrological changes. Overall, the model reproduces a 2-m displacement in the past 8  years that coincides with in situ monitoring data. The proposed model is useful for short- and mid-term predictions of secondary creep. However, long-time predictions remain uncertain, stability depends strongly on the position of the water table depth and new failures during tertiary creep due to soil temporal microstructural degradation are difficult to calibrate.     

Pilocarpus microphyllus seedling growth threatened by climate change: an ecophysiological approach

Theoretical and Applied Climatology - The climate change endangers many species of the Amazon Forest. An example, in the endangered medicinal species Pilocarpus microphyllus (popularly known as...