红树林遥感智能分类方法研究

利用ＧＩＳ信息中的红树林地域分布规律作向导，充分利用械树林区的光谱信息进行红树林植被信息提取。在对比研究常规的红树林图象自理方法的基础上，提出了适用于红树林植被信息遥感监测的智能分类方法。     

Numerical and simplified methods for the calculation of the total horizontal wave force on a perforated caisson with a top cover

The VOF method and the k–ε model, combined with the equation of state of air at constant temperature, have been used to calculate the total horizontal wave force caused by monochromatic waves acting on a perforated caisson with a top cover. From comparison of various parameters, such as the total horizontal force, the pressure difference on the front wall, the pressure on the back wall and the pressure on the top cover, between the numerical results and test data, it can be seen that the numerical results agree well with the test data. It is concluded that the method described in this paper can be utilized to calculate wave forces acting on perforated caissons with a top cover in the case of nonovertopping, nonbreaking waves. A simplified method to calculate the total horizontal force has been developed, based on test data, using a least-squares method. A comparison between the numerical results and the values calculated from the simplified equations shows good agreement. Therefore the simplified equations can be used in engineering applications to evaluate the total horizontal force on a perforated caisson with a top cover.     

Optimal Design for Main Dimensions of a 75000t Floating Production and Storage Vessel

The basis, process and results of the demonstration of the main dimensions of a 75000t floating production and storage vessel are discussed in this paper. A simple but reliable orthogonal design method is applied in the main dimension optimization. The ideas of gradual approximation and feedback from various aspects are put into effect. During the demonstration, in order to make the model tally with the actual situation, the draft design is closely related to the computational analysis, so that the demonstration model can be verified at any time; the handling of the overall system is closely related to the research of each item, which is beneficial not only to the mastery of various regularities, but also to the balance of decisions. Finally, according to the computational results and the regularities obtained from analysis, the main dimensions are determined.     

Computation of Viscous Uniform and Shear Flow over A Circular Cylinder by A Finite Element Method

The incompressible viscous uniform and shear flow past a circular cylinder is studied. The two-dimensional Navier-Stokes equations are solved by a finite element method. The governing equations are discretized by a weighted residual method in space. The stable three-step scheme is applied to the momentum equations in the time integration. The numerical model is firstly applied to the computation of the lid-driven cavity flow for its validation. The computed results agree well with the measured data and other numerical results. Then, it is used to simulate the viscous uniform and shear flow over a circular cylinder for Reynolds numbers from lO0 to lO00. The transient time interval before the vortex shedding occurs is shortened considerably by introduction of artificial perturbation. The computed Strouhal number, drag and lift coefficients agree well with the experimental data. The computation shows that the finite element model can be successfully applied to the viscous flow problem.     

Variation in Water Masses on Shelf of Northern Bering Sea in September 2016-2018

Abstract

Based on hydrological data obtained during the 7th to 9th Chinese National Arctic Research Expeditions in the summers of 2016–2018, the main water structure on the shelf of the northern Bering Sea and the volume and heat fluxes of the Bering Strait throughflow were analyzed. Distinct variability was identified in the three Pacific water masses feeding the strait - Anadyr Water (AW), Bering Shelf Water (BSW) and Alaskan coastal water (ACW). Overall, the temperature and salinity of the entire section increased each year, with 2018 showing significant anomalies, i.e., a temperature anomaly of up to 1?°C and a maximum salinity anomaly of 2. From 2016 to 2018, the extent of the ACW gradually narrowed in the eastern part of this section, while the AW expanded eastward each year. The net volume transport through each of the three sections increased poleward from 1.65?Sv to 2.76?Sv, with the AW increasing from 0?Sv to 1.03?Sv, the BSW varying between 0.52–1.65?Sv, and the ACW gradually decreasing from 1.04?Sv to disappearing completely. The net heat fluxes were also poleward, varying between 25.77 TW and 61.50 TW, and showing a significant increase. Significant variations in magnitude and extent were observed in each water mass of the Bering Strait throughflow, which could produce widespread effects in the Arctic Ocean and the global ocean beyond.     

Numerical simulation of solitary wave scattering by a circular cylinder array

The interaction of a solitary wave with an array of surface-piercing vertical circular cylinders is investigated numerically. The wave motion is modeled by a set of generalized Boussinesq equations. The governing equations are discretized using a finite element method. The numerical model is validated against the experimental data of solitary wave reflection from a vertical wall and solitary wave scattering by a vertical circular cylinder respectively. The predicted wave surface elevation and the wave forces on the cylinder agree well with the experimental data. The numerical model is then employed to study solitary wave scattering by arrays of two circular cylinders and four circular cylinders respectively. The effect of wave direction on the wave forces and the wave runup on the cylinders is quantified.     

Numerical simulation of the hydrodynamic behaviour of submerged plane nets in current

The aim of this paper is to investigate the shape and tension distribution of fishing nets in current. A numerical model is developed, based on lumped mass method to simplify the net. The motion equation is set up for each lumped mass. The Runge–Kutta–Verner fifth-order and sixth-order method is used to solve these simultaneous equations, and then the displacement and tension of each lumped mass are obtained. In order to verify the validity of the numerical method, model tests have been carried out. The results by the numerical simulation agree well with the experimental data.     

黄海、渤海底层温度数值预报方法的研究

根据文献［ｌ］建立的底层温度（ＴＨ）与其水柱垂向平均温度（）的经验关系，结合流体动力学方程和（垂向平均）热传导方程，发展了以水气温差和风速为已知量的底层温度二维数值预报模式。该模式避开了海面热量和动量输入在垂直水柱中分配的复杂物理过程而直接报出底层水温场，具有较好的实用性；此外，从试报结果看，效果令人满意。     

Resistant performance of perforation of multi-layered targets using an estimation procedure with marine application

Recently, multi-layered targets have become commonplace in both military and civilian applications, such as marine hulls, armored vehicle bodies, outside structures of bulletproof cars, and aerospace vessels. This paper studies the resistant performance of perforation in multi-layered targets. An estimation procedure is established based on the concepts of the conservation of momentum, impulse-momentum law, and conservation of energy. Experimental results of the test of Almohandes et al. are adopted to check the residual velocity of multi-layered targets. The results of the verification are good in terms of agreement for impact velocities ranging from 700 to 800 m/s, when the ratio of the projectile length to the projectile diameter (i.e. L/D) is 4.2, and the average residual velocity error of single, double- or triple-layered targets range approximately from 4.42 to 8.40%. The ballistic performance is best for the double target when the ratio of the first layer thickness to the total thickness (i.e. t₁/(t₁+t₂)) is about 0.75, and the worse performance occurs when the ratio t₁/(t₁+t₂) is 0.5. An air gap slightly influences the resistant performance of perforation in multi-layered targets. These results may serve as a useful reference for designers.