Chemical characteristics of chromian spinel in plutonic rocks: Implications for deep magma processes and discrimination of tectonic setting

We summarize chemical characteristics of chromian spinels from ultramafic to mafic plutonic rocks (lherzolites, harzburgites, dunites, wehrlites, troctolites, olivine gabbros) with regard to three tectonic settings (mid‐ocean ridge, arc, oceanic hotspot). The chemical range of spinels is distinguishable between the three settings in terms of Cr# (= Cr/(Cr + Al) atomic ratio) and Ti content. The relationships are almost parallel with those of chromian spinels in volcanic rocks, but the Ti content is slightly lower in plutonics than in volcanics at a given tectonic environment. The Cr# of spinels in plutonic rocks is highly diverse; its ranges overlap between the three settings, but extend to higher values (up to 0.8) in arc and oceanic hotspot environments. The Ti content of spinels in plutonics increases, for a given lithology, from the arc to oceanic hotspot settings by mid‐ocean ridge on average. This chemical diversity is consistent with that of erupted magmas from the three settings. If we systematically know the chemistry of chromian spinels from a series of plutonic rocks, we can estimate their tectonic environments of formation. The spinel chemistry is especially useful in dunitic rocks, in which chromian spinel is the only discriminating mineral. Applying this, discordant dunites cutting mantle peridotites were possibly precipitated from arc‐related magmas in the Oman ophiolite, and from an intraplate tholeiite in the Lizard ophiolite, Cornwall.     

Pressure and temperature dependence of the viscosity of a NaAlSi<Subscript>2</Subscript>O<Subscript>6</Subscript> melt

The viscosity of a silicate melt of composition NaAlSi₂O₆ was measured at pressures from 1.6 to 5.5 GPa and at temperatures from 1,350 to 1,880°C. We employed in situ falling sphere viscometry using X-ray radiography. We found that the viscosity of the NaAlSi₂O₆ melt decreased with increasing pressure up to 2 GPa. The pressure dependence of viscosity is diminished above 2 GPa. By using the relationship between the logarithm of viscosity and the reciprocal temperature, the activation energies for viscous flow were calculated to be 3.7 ± 0.4 × 10² and 3.7 ± 0.5 × 10² kJ/mol at 2.2 and 2.9 GPa, respectively.     

3-D internal architecture of methane hydrate-bearing turbidite channels in the eastern Nankai Trough, Japan

The reservoir architecture of methane hydrate (MH) bearing turbidite channels in the eastern Nankai Trough, offshore Japan is evaluated using a combination of 3-D seismic and well data. On the 3-D seismic section, the MH-bearing turbidite channels correspond to complex patterns of strong seismic reflectors, which show the 3-D internal architecture of the channel complex. A seismic-sequence stratigraphic analysis reveals that the channel complex can be roughly classified into three different stages of depositional sequence (upper, middle, and lower). Each depositional sequence results in a different depositional system that primarily controls the reservoir architecture of the turbidite channels. To construct a 3-D facies model, the stacking patterns of the turbidite channels are interpreted, and the reservoir heterogeneities of MH-bearing sediments are discussed. The identified channels at the upper sequence around the β1 well exhibit low-sinuosity channels consisting of various channel widths that range from tens to several hundreds of meters. Paleo-current flow directions of the turbidite channels are typically oriented along the north-northeast-to-south-southwest direction. High-amplitude patterns were identified above the channels along the north-to-south and north-northeast-to-south-southeast directions. These roughly coincide with the paleo-current flow of the turbidite channels. An interval velocity using high-density velocity analysis shows that velocity anomalies (>2000 m/s) are found on the northeastern side of the turbidite channels. The depositional stage of the northeastern side of the turbidite channels exhibits slightly older sediment stages than the depositional stages of the remaining channels. Hence, the velocity anomalies of the northeastern side of the channels are related to the different stages of sediment supply, and this may lead to the different reservoir architectures of the turbidite channels.     

Uptake mechanism of anthropogenic CO<Subscript>2</Subscript> in the Kuroshio Extension region in an ocean general circulation model

The uptake mechanism of anthropogenic CO₂ in the Kuroshio Extension is examined by a Lagrangian approach using a biogeochemical model embedded in an ocean general circulation model. It is found that the uptake of anthropogenic CO₂ is caused mainly by the increase of pCO₂ dependency of seawater on temperature, which is caused by greater dissolved inorganic carbon concentration in the modern state than in the pre-industrial state. In contrast with the view of previous studies, the effect of the vertical entrainment, which brings waters that last contacted the atmosphere with the past lower CO₂ concentration, is comparatively small. Winter uptake of anthropogenic CO₂ increases with the rise of the atmospheric CO₂ level, while summer uptake is relatively stable, resulting in a larger seasonal cycle of the uptake. This increase is significant, especially in the Kuroshio Extension region. It is newly suggested that this increase in the Kuroshio Extension region is largely caused by the combined effects of the increased pCO₂ dependency of the sea water on the temperature and the seasonal difference in cooling.     

Importance of intracellular Fe pools on growth of marine diatoms by using unialgal cultures and on the Oyashio region phytoplankton community during spring

We report on the ability for luxury Fe uptake and the potential for growth utilizing intracellular Fe pools for 4 coastal centric diatom isolates and in situ phytoplankton assemblages, mainly composed of diatoms. Iron uptake of the diatom isolates and natural phytoplankton assemblages in the Oyashio region during spring blooms were prevented by adding hydroxamate siderophore desferrioxamine B (DFB). After the addition of DFB, intracellular Fe in the diatom isolates supported 2.4–4.2 cell divisions with 1.2–2.6 Chl a doublings. The intracellular Fe was primarily used for cell generation rather than Chl a production, leading to a reduction in the Chl a cell quota in the Fe-starved cells with time. The metabolic properties of the Fe-starved cells with their cell morphologies were different among species or genera. An on-deck incubation experiment also exhibited 1.9 cell divisions and 0.81 Chl a doublings of phytoplankton after the addition of DFB, also indicating the preference of cell generation over Chl a production. A decrease in the level of cellular Chl a, a main light-harvesting pigment in Fe-starved diatoms, may become a superior survival strategy to protect the cells from high irradiance that can cause photo-oxidative damages through photosynthesis. Such relatively low-Fe with high-light conditions could often occur in surface waters of the Oyashio region from spring to summer.     

Formation process of pyrite polyframboid based on the heavy-metal analysis by micro-PIXE

Pyrite framboid in sedimentary rocks could be concerned with arsenic contamination in groundwater of acidic environment and has been studied for the formation process of its unique morphology. However, not much has been discussed about the formation process based on the heavy-metal distribution in pyrite framboids and their aggregates. To reveal the formation process of pyrite framboids and their aggregates, mudstone from the Late Cretaceous Hakobuchi Group, central Hokkaido, Japan, are investigated for mode, petrographical, mineralogical, and micro-PIXE (particle-induced X-ray emission) analysis in this study. Spherical and sub-spherical pyrite framboids observed in polyframboids can be divided into two types based on the diameter of framboids (D) and the average diameter of microcrystals (d) within framboids: type 1, ranging from 2 to 9 μm and from 0.4 to 0.9 μm, respectively, and type 2, ranging from 8 to 50 μm and from 0.5 to 1.8 μm, respectively. Based on the quantitative traverse analyses and 2-D elemental mapping results by micro-PIXE, heterogeneities in the concentrations of heavy metals within the analyzed aggregations of pyrite are exhibited. On the basis of the As and Pb zoning patterns, the time range and chronological stages of pyrite-aggregation growth are revealed.     

Strong motion uncertainty determined from observed records by dense network in Japan

The variation of ground motions at specific stations from events in six narrow areas was inspected by using K-NET and KiK-net records. A source-area factor for individual observation stations was calculated by averaging ratios between observed values for horizontal peak acceleration and velocity, as well as acceleration response spectra for 5% damping, and predicted values using a ground-motion model (usually known as an attenuation relation) by Kanno et al. (Bull Seismol Soc Am, 96:879–897, 2006). Standard deviations between observed and predicted amplitudes after the correction factor are less than 0.2 on the logarithmic scale and decrease down to around 0.15 in the short-period range. Intra-event standard deviation clearly increases with decreasing distance due to differing paths around near source area. Standard deviations may increase with amplitude or decrease with magnitude; however, both amplitude and magnitude of the data are strongly correlated with distance. The standard deviation calculated in this study is obviously much smaller than that of the original ground-motion model, as epistemic uncertainties are minimized by grouping ground motions at specific stations. This result indicates that the accuracy of strong ground motion prediction could be improved if ground-motion models for specified region are determined individually. For this to be possible, it is necessary to have dense strong-motion networks in high-seismicity regions, such as K-NET and KiK-net.     

A study of the morphology of winter sprites in the Hokuriku area of Japan in relation to cloud charge height

Continuous observations of sprites in the Hokuriku area of Japan were performed from two optical sites during the three winter periods. The purpose of this observation is to study the major effect in the appearance of sprites and in determining the morphology of sprites (columns or carrots). Detailed analysis is performed based on the estimation of the height of ?10 °C at the time of sprite occurrence. When the height of ?10 °C is lower than 1800 m, the occurrence of sprites is infrequent, and the dominant shape is column. Then when it is increased (1800–3000 m), a new situation takes place, namely the occurrence of sprites is very enhanced and more spectacular shapes like carrots tend to be frequently observed in addition to column sprites. These sprite characteristics are first compared with those of parent lightning in the Hokuriku area and with our latest computer simulations on sprite initiation.     

Three-dimensional EM computer simulation on sprite initiation above a horizontal lightning discharge

The purpose of this paper is to study the three-dimensional (3D) effects of the source current and the electromagnetic (EM) pulse on the distribution of upper atmospheric electric field and ionization created. A new lightning model has been employed; i.e., we have included a horizontal channel in addition to the conventional vertical channel. The effects of the horizontal lightning channel are summarized as follows: (1) the effect of a vertical channel plays a fundamental role in the whole view of sprite initiation; (2) the position of a sprite is shifted from the position of its parent vertical channel in response to the length of a horizontal channel; and (3) we observe very fine structures with local maxima and minima in the “reduced” electric field (the electric field divided by the neutral gas density). These theoretical inferences are discussed and compared with the observational facts so far reported (such as lateral shift of sprites, morphological difference of sprites, etc.).