Simulation of near source ground motion and its characteristics

It is fact that the severe ground motions of shear waves have a strong effect on the dynamic behavior of buildings and civil structures. We simulate near source strong motions of a pure shear wave and synthesize small motions, using the parameters based on the recorded accelerograms at the site that is regarded as a base rock in the Osaka basin, Japan. By making use of a stochastic technique, we can easily introduce higher frequency contents in the motions and apply the technique to the synthesis of small waves regarding as a green function. We also introduce to the analysis the useful relationships among the time duration T_d, the seismic moment M₀, the corner frequency f_c and the high cutoff frequency f_max which were regressed by a simple representation scheme. Considering two active faults that may affect severe damage on buildings and civil structures, we try to predict strong ground motions in Osaka basin and show the characteristics of them.     

沙虫干呈味及功能性成分研究

对沙虫干抽提物成分的组成进行的研究结果表明 :游离氨基酸含量 w为 10 .3% ,占抽提物含氮物质的 77.9%。抽提物组成中 ,呈甘味的 Gly(3.2 % )、Ala(2 .5% )和呈鲜味的 IMP(0 .2 7% )、Glu(0 .2 5% )、琥珀酸 (0 .35% )等成分同沙虫干独特的风味有关 ,Na 、Cl-等无机离子也同其呈味相关。此外 ,牛磺酸含量 w高达 3.2 % ,是富含牛磺酸的一种海洋生物 ;精氨酸的含量 w亦较高 ,为 1.2 %。     

Os, Pb, and Nd isotope geochemistry of the Permian Emeishan continental flood basalts: Insights into the source of a large igneous province

The nature of the source of continental flood basalts (CFB) is a highly debated topic. Proposed mantle sources for CFBs, including both high- and low-Ti basalts, include subcontinental lithospheric mantle (SCLM), asthenospheric mantle, and deep, plume-related mantle. Re-Os isotope systematics can offer important constraints on the sources of both ocean island basalts (OIB) and CFB, and may be applied to distinguish different possible melt sources. This paper reports the first Re-Os isotope data for the Late Permian Emeishan large igneous province (LIP) in Southwest China. Twenty one CFB samples including both low- and high-Ti basalts from five representative sites within the Emeishan LIP have been analyzed for Os, Nd, and Pb isotopic compositions. The obtained Os data demonstrate that crustal assimilation affected Os isotopic compositions of some Emeishan basalt samples with low Os concentrations but not all of the samples, and the Emeishan basalts with high Os contents likely experienced the least crustal contamination. The low and high-Ti basalts yield distinct Os signatures in terms of ¹⁸⁷Os/¹⁸⁸Os and Os content. The low-Ti basalt with the highest Os concentration (400 ppt) has a radiogenic Os isotopic composition (γOs(t), +6.5), similar to that of plume-derived OIB. Because the Os isotopic composition of basalts with relatively high Os concentrations (typically >50 ppt) likely represents that of their mantle source, this result implies a plume-derived origin for the low-Ti basalts. On the other hand, the high-Ti basalts with high Os concentration (over 50 ppt) have unradiogenic Os isotopic signatures (γOs(t) values range from −0.8 to −1.4), suggesting that a subcontinental lithosphere mantle (SCLM) component most likely contributed to the generation of these magmas. Combining Pb and Nd isotopic tracers with the Os data, we demonstrate that the low-Ti basaltic magmas in the Emeishan CFB were mainly sourced from a mantle plume reservoir, whereas the high-Ti basaltic magmas were most likely derived from a SCLM reservoir or were contaminated by a significant amount of lithospheric mantle material during plume-related magma ascent through the SCLM.     

Relationship between radar reflectivity and the time scale of warm rain formation in a global cloud-resolving model

The connections between radar reflectivity and the time scale of warm rain formation are examined within a global cloud-resolving model. The parameterizations formulae of auto-conversion and accretion processes in the model reveal specific relationships between the time scale for auto-conversion and radar reflectivity of cloud water as well as between the time scale for accretion and radar reflectivity of rain water. The overall time scale for warm rain formation, determined by combined contributions from these processes, is found to relate with total radar reflectivity in the manner that varies with cloud-rain composition between auto-conversion and accretion limits. The global statistics from the model output reveals that the time scale is closely related with the total radar reflectivity, thus suggesting that the radar reflectivity is a gross measure of the warm rain time scale. The relationship developed is applied to both model-simulated and CloudSat-observed radar reflectivities to compare the time scales of warm rain formation between observation and the model. Comparison of the time scale so derived reveals significant differences between the model and CloudSat observations. These differences suggest that the simulated cloud-rain composition in the model is biased toward larger rain water contents and smaller content of cloud water compared to reality due to an accelerated cloud-to-rain water conversion in the model.     

Laboratory detection of a new interstellar free radical CH2CN(2B1)

An asymmetric-top free radical CH2CN, which as a 2B1 ground state, was detected for the first time by laboratory microwave spectroscopy. The radical was produced in a free-space absorption cell by a DC glow discharge in pure CH3CN gas. About 60 fine-structure components were observed for the N = 11-10 to 14-13 a-type rotational transitions in the frequency region of 220-260 GHz, and many hyperfine resolved components for the N = 4-3 and 5-4 transitions in the 80 and 100 GHz regions, respectively. The molecular constants, including the rotational constants, centrifugal distortion constants, and spin-rotation coupling constants with centrifugal distortion correction terms were determined from the fine-structure resolved transitions, and the hyperfine coupling constants due to the hydrogen and nitrogen nuclei were obtained from the low-N transitions. As a result we assigned U100602 and U80484 from Sgr B2, and U40240 and U20120 from TMC-1, to the N = 5-4, 4-3, 2-1, and 1-0 transitions with K-1 = 0 of the CH2CN radical.     

Diverse Range of Mineralization Induced by Phase Separation of Hydrothermal Fluid: Case Study of the Yonaguni Knoll IV Hydrothermal Field in the Okinawa Trough Back-Arc Basin

The Yonaguni Knoll IV hydrothermal vent field (24°51′N, 122°42′E) is located at water depths of 1370–1385 m near the western edge of the southern Okinawa Trough. During the YK03–05 and YK04–05 expeditions using the submersible Shinkai 6500, both hydrothermal precipitates (sulfide/sulfate/carbonate) and high temperature fluids (Tmax = 328°C) presently venting from chimney‐mound structures were extensively sampled. The collected venting fluids had a wide range of chemistry (Cl concentration 376–635 mmol kg^?1), which is considered as evidence for sub‐seafloor phase separation. While the Cl‐enriched smoky black fluids were venting from two adjacent chimney‐mound structures in the hydrothermal center, the clear transparent fluids sometimes containing CO₂ droplet were found in the peripheral area of the field. This distribution pattern could be explained by migration of the vapor‐rich hydrothermal fluid within a porous sediment layer after the sub‐seafloor phase separation. The collected hydrothermal precipitates demonstrated a diverse range of mineralization, which can be classified into five groups: (i) anhydrite‐rich chimneys, immature precipitates including sulfide disseminations in anhydrite; (ii) massive Zn‐Pb‐Cu sulfides, consisting of sphalerite, wurtzite, galena, chalcopyrite, pyrite, and marcasite; (iii) Ba‐As chimneys, composed of barite with sulfide disseminations, sometimes associated with realgar and orpiment overgrowth; (iv) Mn‐rich chimneys, consisting of carbonates (calcite and magnesite) and sulfides (sphalerite, galena, chalcopyrite, alabandite, and minor amount of tennantite and enargite); and (v) pavement, silicified sediment including abundant native sulfur or barite. Sulfide/sulfate mineralization (groups i–iii) was found in the chimney–mound structure associated with vapor‐loss (Cl‐enriched) fluid venting. In contrast, the sulfide/carbonate mineralization (group iv) was specifically found in the chimneys where vapor‐rich (Cl‐depleted) fluid venting is expected, and the pavement (group v) was associated with diffusive venting from the seafloor sediment. This correspondence strongly suggests that the subseafloor phase separation plays an important role in the diverse range of mineralization in the Yonaguni IV field. The observed sulfide mineral assemblage was consistent with the sulfur fugacity calculated from the FeS content in sphalerite/wurtzite and the fluid temperature for each site, which suggests that the shift of the sulfur fugacity due to participation of volatile species during phase separation is an important factor to induce diverse mineralization. In contrast, carbonate mineralization is attributed to the significant mixing of vapor‐rich hydrothermal fluid and seawater. A submarine hydrothermal system within a back‐arc basin in the continental margin may be considered as developed in a geologic setting favorable to a diverse range of mineralization, where relatively shallow water depth induces sub‐seafloor phase separation of hydrothermal fluid, and sediment accumulation could enhance migration of the vapor‐rich hydrothermal fluid.     

Effect of divalent cations on the kinetics of Fe(III) complexation by organic ligands in natural waters

We have investigated the kinetics of Fe(III) complexation by several organic ligands including fulvic acid, citrate and ethylenediaminetetraacetic acid (EDTA). Particular attention was given to examination of the effect of competitive divalent cations (Me: Ca²⁺ and Mg²⁺) at concentrations typical of seawater on the complexation rate. All experiments were conducted in 0.5 M NaCl solution buffered with 2 mM bicarbonate at pH 8.0 in the absence and presence of Me (25 μM-250 mM). The rate constants of complex formation determined by using the competitive ligand (5-sulfosalicylic acid) method combined with visible spectrophotometry ranged from 3.3 × 10⁴ to 3.2 × 10⁶ M⁻¹ s⁻¹. The mechanism of complexation was then examined based on a kinetic model. When EDTA was used as a ligand, Me at concentrations comparable to the ligand markedly retarded the rate of iron complex formation due to the predominance of an adjunctive pathway (where iron-ligand complex is formed via direct association of iron to Me-ligand complex). In contrast, the competing effect of Me on iron complexation by citrate and fulvic acid was observed only when the Me concentration was in excess of the ligand by more than a factor of 10-1000. The kinetic model suggests that iron complexation by fulvic acid occurs predominantly via a disjunctive pathway (where iron complexation by ligand occurs after dissociation of Me from Me-ligand complex) at concentrations of divalent cations and natural organic matter typical of natural waters including seawater and freshwater.     

Dynamics of electron beams in a coronal loop and the hard X-ray burst

A numerical simulation has been made for the dynamics of non-thermal electrons (> 10keV) injected with spatial, temporal and velocity distributions into a model coronal loop. The time variations of the spatial intensity distribution and the spectrum for the expected hard X-rays are computed for many models in order to find the important physical parameters for those characteristics.The most important one is the column density of plasma, CD, along the loop. If CD is smaller than 10²⁰ cm^–2, the expected X-rays behave like the solar impulsive hard X-ray bursts, that is the spatial maximum of X-rays shifts to the top of the loop in the later phase of the burst accompanying a spectral softening. On the other hand, if CD is greater than this value, quasi-steady decay appears in the later phase. In this case the intensity distribution of X-rays above about 20 keV along the loop shows a broad maximum away from the loop top giving an extended spatial distribution of hard X-rays, and spectral hardness is kept constant. These characteristics are similar to the solar gradual hard X-ray bursts (the so-called extended burst which is not a hot thermal gradual burst).     

Box model analysis on phytoplankton production and grazing pressure in a eutrophic estuary

To determine the quantitative relationship between phytoplankton production and zooplankton grazing pressure in Atsumi Bay, a eutrophic and partially-mixed estuary, a series of investigations, including measurements of hydrographic conditions, dissolved oxygen, dissolved total nitrogen, particulate organic nitrogen, and phyto- and zooplankton biomass were conducted 13 times at intervals of 2–7 days in June and July 1984. Continuous measurements of water flow and salinity were also carried out to examine transverse flow and horizontal diffusivity. The supply of freshwater and nitrogen was estimated from given data. The changes of hydrographic condition, net photosynthetic rate and community primary production were calculated by a two-layered box model analysis. The grazing rate on phytoplankton obtained as the difference between net photosynthetic rate and community primary production was compared to the one estimated from zooplankton biomass and sardine,Sardinops melanosticta, biomass. The agreement between the data was remarkable in the upper layer, showing the grazing pressure on phytoplankton followed phytoplankton production, suggesting that a large part of produced phytoplankton was immediately grazed by zooplankton. Consequently, the community primary production was depressed to a fairly lower level. An important role of nutrient supply and water circulation, to limit phytoplankton production, was also confirmed. Dynamic response observed between the calculated grazing pressure and the biomass of phytoplankton and protozoa was also analyzed.