Efficient Cable Shovel Excavation in Surface Mines

The cable shovel is widely used in surface mining. High operating and ownership costs necessitate efficient use of the cable shovel. Operator practices have long been suspected to contribute towards the inefficient use of the shovel. Crowd arm and hoist rope speeds are key measures of operator practices. The objective of this work is to find the crowd arm and hoist rope speeds for optimal shovel performance for given initial conditions and material properties. Shovel kinematics and dynamic modeling, using shovel geometry and the simultaneous constraint method, respectively, have been employed to build models of the excavation process. Dynamic models of the shovel payload and the material cutting resistance have also been developed using geometric simulation and passive soil pressures techniques, respectively. These models are solved numerically by combining Runge–Kutta and Gaussian elimination algorithms to compute the work done and the resistive forces during shovel excavation. The algorithms have been combined into a shovel simulator. The simulator has been used to simulate the P&H 2100BL shovel. The simulation results indicate that input energy and digging time increase with increasing crowd arm and decreasing hoist rope speeds. The input energy per unit loading rate is proposed as an appropriate measure of shovel performance. High energy per unit loading rate occurs for high crowd speeds and low hoist rope speeds. For the simulated conditions and crowd arm and hoist rope speeds ranging from 0.25 to 0.5 ms⁻¹ and 0.5 to 0.7 ms⁻¹, respectively, the optimal crowd arm and hoist rope speeds were found to be 0.25 ms⁻¹ and 0.7 ms⁻¹, respectively, and the objective function value was 0.21 KJs/kg. This work establishes, theoretically, the fact that operator practices have an effect on shovel performance and is useful in establishing optimum practices. The results are the initial steps towards full automation of the excavation process.     

Delineation of Rajmahal basaltic flows,inter-trappeans and associated coal layers using Audio-magneto-telluric method

The extensive volcanic activity of Rajmahal occurred during early Cretaceous (~117 Ma). Potentially perspective Gondawana sediments containing coal seam is partially covered by these basalts. Basalts as well as coal are already known to be of immense economic importance over Rajmahal traps. The present study mainly deals with delineation of basaltic lava flows and associated coal layers using the Audio-magneto-telluric (AMT) study in the south central region of Rajmahal traps near Suri, West Bengal, India. Initially, the field situations have been simulated using forward model with top alluvium cover followed by basaltic lava flows, a wedge shaped inter-trappean sedimentary formation with second basaltic lava flows and basement at the bottom. The model was constrained using available litholog. The model study reveals the presence of moderately resistive basalts, relatively conductive inter-trappeans and the basement, except the top alluvium layer and thin inter-trappeans. Subsequently, threeAMT sounding have been carried out over Cholaguria, Hatgacha and Pachami, Suri, West Bengal. The field AMT study reveals three basaltic lava flows with varying thickness from ~40m to ~350m and composite thickness of ~620m to ~640m, which match well with the published borehole litholog. The inter-trappeans have been identified at 500m to 620m, 310m to 400m and 500m to 640m depths over Cholaguria, Hatgacha and Pachami, respectively. It is interesting to mention that the identified inter-trappeans are inferred to be coal/shaly-coal which are matching very well with the published borehole lithologs.     

Revisiting Sustainable Development of Dry Valleys in Hengduan Mountains Region

Dry valleys are a striking geographic landscape in Hengduan Mountains Region and are characterized by low rainfall, desert type of vegetation and fragile environment. Past efforts and resources have been concentrated mainly on rehabilitation of degraded ecosystem and fragile environment, particularly reforestation, while socio-economic development has been largely overlooked. Despite successes in pocket areas, the overall trend of unsustainability and environmental deterioration are continuing. It is important to understand that uplift of the Tibetan Plateau is the root cause of development of dry valleys, and development and formation of dry valleys is a natural process. Human intervention has played a secondary role in development of dry valleys and degradation of dry valleys though human intervention in many cases has speeded up environmental degradation of the dry valleys. It is important to understand that dry valleys are climatic enclaves and an integrated approach that combines rehabilitation of degraded ecosystems and socio-economic development should be adopted if the overall goal of sustainable development of dry valleys is to be achieved. Promotion of niche-based cash crops, rural energy including hydropower, solar energy, biogas and fuelwood plantation is recommended as the priority activities.     

Assessment and Management Flash Flood in Najran Wady Using GIS and Remote Sensing

Flash flood assessment and management are necessary for municipal, urban growth planning and emergency action plans. By using the Hydrologic Engineering Centers River Analysis System software, we can model flash flood events and calculate water surface profiles over the length of the modeled stream. After collecting elevation points by using GPS method, the digital elevation model can be calculated for the study area. Najran city has main flood stream passes beside King Abdullah Road based on facts and previous works. A small study area including the mainstream of Wady Najran and King Abdullah Road has chosen as test site. The used methodology has also been proved efficiently for identifying flood inundation maps. Water extent area overlapped by 52–86% for both used methods. At discharge Q = 15 m³/s, the road needs to be protected from the flood.     

300年来中国森林的变化

Based on historical documents, modern survey and statistics, as well as the result of predecessor studies, the trend and main process of forest dynamics are recognized. The forest area and forest coverage rates for each province of China from 1700 to 1949 are estimated backward by every 50 years. Linking the result with modern National Forest Inventory data, the spatial-temporal dynamics of Chinese forest in recent 300 years （AD 1700-1998） is quantitatively analyzed. The study shows that in recent 300 years, the forest area in current territory of China has declined by 0.95×10^8 hm^2 （or 9.2% of the coverage rate） in total, with a trend of decrease and recovery. Before the 1960s, there was a trend of accelerated descending. The forest area was reduced by 1.66×10^8 hm^2 （or 17% of the coverage rate） in 260 years. While after the 1960s, there has been a rapid increase. The forest area increased by 0.7×10^8 hm^2 （or 8% of the coverage rate） in 40 years. The study also shows that there is a significant spatial difference in the dynamics of forest. The amplitudes of increasing and decreasing in western China are both smaller than the ones in eastern China. During the rapid declining period from 1700 to 1949, the most serious decrease appeared in the Northeast, the Southwest and the Southeast, where the coverage rate in most provinces dropped over 20%. In Heilongjiang Province, the coverage rate dropped by 50%. In Jilin Province, it dropped by 36%. In Sichuan Province and Chongqing Municipality, it dropped by 42%. In Yunnan Province, it dropped by 35%. During the recovery period 1949-1998, the western provinces, municipality and autonomous regions, including Ningxia, Gansu, Inner Mongolia, Sichuan-Chongqing, Yunnan, Tibet, Xinjiang and Qinghai, etc, the increase rates are all below 5%, while the eastern provinces, municipality and autonomous regions （except Heilongjiang, Hubei, Jiangsu-Shanghai） have achieved an increase over 5%, among which the Guangdong-Hainan, Guangxi, Anhui, Beijing-Tianjin-H     

Hydrogeochemistry of Groundwater and Its Suitability for Drinking and Agricultural Use in Nahavand,Western Iran

Groundwater is the major source of drinking water in Nahavand city. However, the groundwater quality at the agricultural areas has been deteriorating in recent years. Ground water quality monitoring is a tool which provides important information for water management and sustainable development of the water resources in Nahavand. Hydrochemical investigations were carried out in an agricultural area in Nahavand, western Iran, to assess chemical composition of groundwater. In this study, 64 representative groundwater samples were collected from different irrigation wells and analyzed for pH, electrical conductivity, major ions, and nitrate. The results of the chemical analysis of the groundwater showed that concentrations of ions vary widely and the most prevalent water type is Ca–Mg–HCO₃, followed by other water types: Ca–HCO₃, Ca–Na–HCO₃, and Na–Cl, which is in relation with their interactions with the geological formations of the basin, dissolution of feldspars and chloride and bicarbonate minerals, and anthropogenic activities. Thirty-seven percent of the water samples showed nitrate (NO₃ ⁻) concentrations above the human affected value (13 mg L⁻¹). The phosphorous (P) concentration in groundwater was between 0.11 and 0.90 mg L⁻¹, with an average value of 0.30 mg L⁻¹, with all of the samples over 0.05 mg L⁻¹. The most dominant class C2-S1 (76.5%) was found in the studied area, indicating that sodicity is very low and salinity is medium, and that these waters are suitable for irrigation in almost all soils. Agronomic practices, such as cultivation, cropping, and irrigation water management may decrease the average NO₃ ⁻ concentration in water draining from the soil zone.     

Variation of Thornthwaite moisture index in Hengduan Mountains,China

The Thornthwaite moisture index, an index of the supply of water(precipitation) in an area relative to the climatic demand for water(potential evapotranspiration), was used to examine the spatial and temporal variation of drought and to verify the influence of environmental factors on the drought in the Hengduan Mountains, China. Results indicate that the Thornthwaite moisture index in the Hengduan Mountains had been increasing since 1960 with a rate of 0.1938/yr. Annual Thornthwaite moisture index in Hengduan Mountains was between –97.47 and 67.43 and the spatial heterogeneity was obvious in different seasons. Thornthwaite moisture index was high in the north and low in the south, and the monsoon rainfall had a significant impact on its spatial distribution. The tendency rate of Thornthwaite moisture index variation varied in different seasons, and the increasing trends in spring were greater than that in summer and autumn. However, the Thornthwaite moisture index decreased in winter. Thornthwaite moisture index increased greatly in the north and there was a small growth in the south of Hengduan Mountains. The increase of precipitation and decrease of evaporation lead to the increase of Thornthwaite moisture index. Thornthwaite moisture index has strong correlation with vegetation coverage. It can be seen that the correlation between Normalized Difference Vegetation Index(NDVI) and Thornthwaite moisture index was positive in spring and summer, but negative in autumn and winter. Correlation between Thornthwaite moisture index and relative soil relative moisture content was positive in spring, summer and autumn, but negative in winter. The typical mountainous terrain affect the distribution of temperature, precipitation, wind speed and other meteorological factors in this region, and then affect the spatial distribution of Thornthwaite moisture index. The unique ridge-gorge terrain caused the continuity of water-heat distribution from the north to south, and the water-heat was stronger than that from the east to west part, and thus determined the spatial distribution of Thornthwaite moisture index. The drought in the Hengduan Mountains area is mainly due to the unstable South Asian monsoon rainfall time.     

Line-of-Sight Observables Algorithms for the <Emphasis Type="Italic">Helioseismic and Magnetic Imager</Emphasis> (HMI) Instrument Tested with <Emphasis Type="Italic">Interferometric Bidimensional Spectrometer</Emphasis> (IBIS) Observations

The Helioseismic and Magnetic Imager (HMI) instrument onboard the Solar Dynamics Observatory produces line-of-sight (LOS) observables (Doppler velocity, magnetic-field strength, Fe i line width, line depth, and continuum intensity) as well as vector magnetic-field maps at the solar surface. The accuracy of LOS observables is dependent on the algorithm used to translate a sequence of HMI filtergrams into the corresponding observables. Using one hour of high-cadence imaging spectropolarimetric observations of a sunspot in the Fe i line at 6173 Å through the Interferometric Bidimensional Spectrometer installed at the Dunn Solar Telescope, and the Milne–Eddington inversion of the corresponding Stokes vectors, we test the accuracy of the observables algorithm currently implemented in the HMI data-analysis pipeline: the MDI-like algorithm. In an attempt to improve the accuracy of HMI observables, we also compare this algorithm to others that may be implemented in the future: a least-squares fit with a Gaussian profile, a least-squares fit with a Voigt profile, and the use of second Fourier coefficients in the MDI-like algorithm.     

Tidal current observation in the southern Yellow Sea in the summers of 2001 and 2003

Direct current observations in the Yellow Sea interior are very scarce due to intense fishing and trawling activities. Most previous studies on tides in the area were based on coastal measurements or satellite altimeter sea levels and have not been rigorously compared with direct measurements. In this paper, tidal currents are studied with current profiles from three bottom-moored Sontek Acoustic Doppler Profilers （ADPs） deployed in the southern Yellow Sea in summer of 2001 and 2003. The measured current series were dominated by tidal currents. Maximum velocities are between 40-80 cm/s at the mooring stations. M2 current is the most dominant primary tidal constituent, while MS4 and M4 are the most significant shallow water tides with much smaller amplitudes than the primary tides.     

UV-radiation in galaxies

I review the origin of UV-radiation in galaxies of different morphological types. UV-excess in spectra of massive elliptical galaxies which have predominantly old stellar populations is traditionally explained by the contribution of low-mass stars at very late, poorly known stages of evolution—by so called ‘AGB-manqué’ stars or by the population of extended horizontal branch. However recent results from the GALEX survey of a large sample of nearby ellipticals have also demonstrated probable traces of recent star formation in a third of all ellipticals observed. In spiral galaxies extended UV-disks have been discovered by the GALEX; they are certainly illuminated by the current star formation, but what has provoked star formation in the areas of very low gas density, beyond the distribution of older stars, is a puzzle yet. The UV-spectra of starburst galaxies or starforming galactic nuclei are characterized by weak emission lines, if any, quite dissimilar to their optical spectra.