Composition,Structure, and Conditions of Formation of Fluorine-Bearing Sodalite: Experimental Evidence

Fluoro-sodalite was synthesized for the first time at temperatures of 400–800°C and H₂O pressures of 1–2 kbar in the Si–Al–Na–H–O–F system. X-ray diffraction and infrared spectroscopic investigations showed that fluorine is incorporated in the sodalite structure as anionic octahedral groups, [AlF₆]^3–, the number of which can vary from 0 to 1. Correspondingly, the end-members of the F-sodalite series are Na₇(H₂O)₈[Si₅Al₇O₂₄] and Na₈(AlF₆)(H₂O)₄[Si₇Al₅O₂₄]. Depending on the composition of the system, F-sodalite associates at 500–650°C with nepheline, albite, cryolite, and villiaumite, which are joined by analcime below 500°C and aluminosilicate melt above 650°C. Fluorine-bearing sulfate–chlorine-sodalite was found for the first time in a pegmatite sample from the Lovozero massif. The highest fraction of the fluorine end-member in natural sodalite is 0.2. The incorporation of F into the sodalite structure requires much more energy compared with Cl^– and SO ₄ ^2- , because it is accompanied by a structural rearrangement and a transition from tetrahedral Al to octahedral Al.     

Effect of loading duration on uncertainty in creep analysis of clay

Some studies suggest that creep parameters should be determined using a greater quantity of creep test data to provide more reliable prediction regarding the deformation of soft soils. This study aims to investigate the effect of loading duration on model updating. One‐dimensional consolidation data of intact Vanttila clay under different loading durations collected from the literature is used for demonstration. The Bayesian probabilistic method is used to identify all unknown parameters based on the consolidation data during the entire consolidation process, and their uncertainty can be quantified through the obtained posterior probability density functions. Additionally, the optimal models are also determined from among 9 model candidates. The analyses indicate that the optimal models can describe the creep behavior of intact soft soils under different loading durations, and the adopted method can evaluate the effect of loading duration on uncertainty in the creep analysis. The uncertainty of a specific model and its model parameters decreases as more creep data are involved in the updating process, and the updated models that use more creep data can better capture the deformation behavior of an intact sample. The proposed method can provide quantified uncertainty in the process of model updating and assist engineers to decide whether the creep test data are sufficient for the creep analysis.     

A GIS based planning support system for assessing financial feasibility of urban redevelopment

Urban densification trends combined with redevelopment increasingly moving away from large former industrial and transport sites toward existing town centres and corridors indicate redevelopment is becoming increasingly complex, difficult to plan for and undertake. The interplay between land and property markets and planning frameworks suggest city planners and urban researchers need new tools and methodologies to gain insights into ways to deliver effective responses. Despite the need, there is a limited availability of comprehensive models to fulfil the task. This paper describes a GIS-based tool to assess parcel-level financial feasibility and housing supply associated with urban redevelopment within a precinct. The tool incorporates existing and potential built form and parameters associated with the planning framework and land and property markets. Using a real case study in a workshop, tool performance was evaluated by professional urban planners in terms of its capacity to produce metrics and visualisations of potential scenarios of redevelopment. Results indicate the usefulness of the tool for emulating land market conditions and testing scenarios of planning regulation and market changes for strategic planning purposes.     

Paleo-environment and reservoir evolution of the Middle Ordovician Kelimoli Formation in the northern Tianhuan area,Ordos Basin,China: implications for high-quality reservoir development

The Middle Ordovician Kelimoli Formation carbonate reservoirs in the northern Tianhuan area, Ordos Basin, China are main exploration targets. Subsurface core samples, logging, drilling and production data from the area were used to characterise the carbonate reservoir and to construct a genetic model for exploration. The sedimentary facies identified include trough–continental rise, upper–lower slope, platform margin reef-shoal, open platform and evaporation-restricted platform. The slope and platform margin facies are potential zones for high-quality reservoirs. Porosity in the study area comprises intergrain, intercrystal, intragrain and intracrystal pores, fractures and vughs. The Sr/Ba (0.40–4.87) and V/(V + Ni) (0.64–0.97) ratios indicate deposition in a brackish water-dominated environment under reducing conditions, associated with sea-level fluctuations during the deposition of the Kelimoli Formation. The Sr/Ba, V/(V + Ni), ⁸⁷Sr/⁸⁶Sr ratios, δ¹⁸O values and crystal texture of dolomite samples suggest that meteoric water was involved in the diagenetic fluid in the near-surface depositional environment. Isotopes (δ¹³C and δ¹⁸O) and trace elements (Fe and Mn) allowed the identification of seepage-reflux and mixed-water dolomitisation. The crystal textures of the samples consist of micritic, bioclastic and reefal limestones, and dolomite with gypsum, which were easily dissolved during the early diagenetic stage. The epidiagenetic stage was the key period for the development of high-quality reservoirs because of large-scale bedding-parallel karstification from meteoric water. The reservoir zones, dominated by partially filled and unfilled vughs, and fractures, are favourable exploration targets in the northern Tianhuan area.     

Petrophysical characterisation of tight sandstone gas reservoirs using nuclear magnetic resonance: a case study of the upper Paleozoic strata in the Kangning area,eastern margin of the Ordos Basin,China

Residual and movable porosity are significant parameters for characterising petrophysical properties, especially in tight reservoirs. Eight tight sandstone samples from the upper Paleozoic gas-bearing strata in the Kangning area, from the eastern margin of the Ordos Basin, were analysed using nuclear magnetic resonance (NMR), scanning electron microscopy (SEM), petrography, and porosity and permeability tests. The lithology and pore types were identified and classified using petrography and SEM. The residual and movable porosity were obtained with NMR. In addition, NMR was used to visualise pore structure and pore size distribution. The results suggest that the upper Paleozoic sandstones in the study area mainly comprise feldspathic litharenite and litharenite. The sandstone porosity and permeability are low, with means of 5.9% and 0.549 mD, respectively. Four pore types exist in the tight sandstones: residual primary pores, grain dissolution pores, micropores (clay-dominated) and microfractures. The T₂ spectra under water-saturated conditions correlate with pore size and can be used to distinguish small and large pores based on the transverse relaxation time cutoff value of 10 ms, which corresponds to a pore diameter of 0.232 μm. Small pores account for 72% of the pores in the tight sandstones. The continuous bimodal T₂ spectra suggest good connectivity between small and large pores, despite the low porosity and permeability. In this study, the movable porosity of the major tight sandstone gas reservoirs is higher than the residual porosity, which confirms the effective evaluation of movable porosity to tight sandstone reservoirs, based on NMR experiments.     

Age and Provenance Areas of Terrigenous Rocks of the Dzhida Terrane: Results of U—Th—Pb (LA-ICP-MS) Geochronological Study of Detrital Zircons

The results of U—Th—Pb (LA-ICP-MS) geochronological studies of detrital zircons from terrigenous rocks of the Dzhida terrane of the Central Asian Fold Belt (CAFB) are presented. The data obtained allow us to distinguish the following age maxima (Ma): 578 and 634 (Vendian); 720, 823, and 919 (Late Riphean); 1922, 2090, 2225, and 2321 (Early Proterozoic). A number of zircons have Late Archean age in the interval of 2670–2980 Ma. Taking into account Late Cambrian age (504–506 Ma) of intrusive rocks that intruded the Dzhida terrane, a possible sedimentation period of sequences of this terrane is estimated to be in the interval of 580–510 Ma (from Vendian to Late Cambrian). The possible provenance areas of terrigenous sediments are proposed and the previously proposed models of geodynamic evolution of the Dzhida terrane are correlated with new geochronological data.     

准噶尔盆地玛湖凹陷百口泉组相对湖平面升降规律研究

准噶尔盆地三叠系百口泉组相对湖平面升降规律认识不清,制约了对百口泉组沉积体系分布与演化的分析。在高分辨率层序地层学理论指导下,综合钻井、测井等资料,采用传统定性分析与定量的测井小波变换分析相结合的方法,对准噶尔盆地玛湖凹陷斜坡区三叠系百口泉组进行高精度层序地层划分,将百口泉组定量划分为1个长期层序,4个中期层序,16个短期层序,126个超短期层序;对126个超短期层序进行Fisher图解的定量分析,结果显示百口泉组沉积时期湖平面升降总体表现出持续上升的特征,内部又可划分为多个次级湖平面升降旋回,百口泉组一段（T₁b₁）、百口泉组二段（T₁b₂）、百口泉组三段（T₁b₃）与三次湖平面持续上升过程相对应,百口泉组三段（T₁b₃）湖平面达到百口泉组时期的最大规模。通过对比前人研究成果和钻井地质信息,认为相对湖平面升降曲线具有很高的可信度。     

Experimental Study on Acoustoelastic Character of Rock Under Uniaxial Compression

This paper made a research about the change rule of elastic wave velocity with stress applied on rock from theoretical and experimental aspect. Firstly, a mathematical model of P-wave velocity and confining pressure of rock was set up from the point of acoustoelastic character. Effect of axial stress on P-wave velocity in granite and sandstone during uniaxial compression process was studied experimentally by using GAW-2000 rock mechanical testing system and RSM-SY5 ultrasonic wave testing system, and the relation curves of axial stress with P-wave velocity were obtained. Based on test data, acoustoelastic theoretical formulas of granite and sandstone were established and the best empirical formulas were fitted by using regression method. Meanwhile, a comparative analysis of the empirical and theoretical calculated values was carried out. Finally, the reliability of applying acoustoelastic theoretical formula in hard rock range was further verified based on the experimental data of granitic gneiss. The results show that the P-wave velocity experiences a rapid increase, gentle increase and then a sharp fall during the uniaxial compression process. The B-value in acoustoelastic theoretical formula (proportion coefficient determined by elastic modulus and third-order elastic constant) decreases exponentially with axial stress. The acoustoelastic theoretical formula can effectively reflect the relationship between rock acoustic velocity and stress within the allowable error, which can be the theoretical foundation of acoustoelastic geo-stress measurement of subsurface rock mass.     

Two Phases of Mineralization in the Dabaoshan Polymetallic Deposit,Guangdong Province: Constraints from Re-Os Geochronology of Black Carbonaceous Mudstone and MolybdeniteEI北大核心CSCD

The Dabaoshan polymetallic deposit is a polygenetic composite ore deposit located at south of the Qinhang (Qinzhou-Hangzhou) Metallogenic Belt, which is composed mainly of SEDEX type Cu-Pb-Zn and porphyry-skarn type W-Mo orebodies. Systematic field study shows that the W-Mo mineralization exhibits as quartz-vein type and skarn type orebodies around the granodioritic porphyry, or superimposes on the SEDEX type Cu-Pb-Zn orebody, while the Cu-Pb-Zn mineralization occurs mainly in the Qiziqiao Formation as stratiform-substratiform type and breccia type orebodies with typical SEDEX-type characteristics. Re-Os dating of five molybdenite separates from porphyry-skarn type W-Mo orebodies yielded isochron ages of 163.6±1.0 Ma (MSWD=0.58), which represents the age of W-Mo mineralization. Re-Os dating of seven black carbonaceous mudstone samples from a Cu-Pb-Zn orebody yielded isochron age of 387.6±9.9 Ma (MSWD=56), which is interpreted to be the age of SEDEX-type Cu-Pb-Zn mineralization. These ages indicate that there are at least two stages of ore mineralization in the Dabaoshan polymetallic deposit. The W-Mo mineralization is related to the Yanshanian intermediated-acidic intrusions, while the stratiform-substratiform SEDEX-type Cu-Pb-Zn mineralization is associated with the Hercynian seafloor hydrothermal activities. © 2018, Science Press. All right reserved.     

Hydrothermal Dolomite: A Review and PerspectiveEI北大核心CSCD

Hydrothermal dolomite commonly closely associates with oil-gas reservoirs and sediment-hosted Pb-Zn deposits, the Mississippi Valley-type (MVT) Pb-Zn deposits in particular. Host rocks of MVT deposits usually experienced extensive dolomitization, and indeed, hydrothermal dolomite is considered as a useful prospective indicator for MVT mineralization. However, genetic link between the hydrothermal dolomitization and MVT Pb-Zn mineralization is a matter of debate. This paper briefly reviewed the nomenclature and research history of hydrothermal dolomite, introduced the major geological, geochemical characteristics, and distribution of hydrothermal dolomite, spatial and possibly genetic relationship between hdyrothermal dolomite and hdyrothermal ore deposits and oil-gas reservoirs based on case studies including the occurrence of hydrothermal dolomites in MVT deposits in Southwest China. The temporal and genetic relationships between dolomitizaiton and thermal sulfate reduction, sulfide precipitation and thus the location of ore mineralization well worthy more attention, and comprehensive geological and isotope geochemical and state of art in situ techniques will contribute to understanding of the genesis of hydrotherml dolomite and the spatially related ore deposits and oil-gas reservoirs. © 2018, Science Press. All right reserved.