In situ observation of a phase transition in Fe2SiO4 at high pressure and high temperature

We used an in situ measurement method to investigate the phase transition of Fe₂SiO₄ polymorphs under high pressures and temperatures. A multi-anvil high-pressure apparatus combined with synchrotron X-ray radiation was used. The stability of each polymorph was identified by observing the X-ray diffraction data from the sample. In most experiments, the diffraction patterns were collected 10–30 min after reaching the desired pressure and temperature conditions. The transition boundary between the olivine and spinel phase at T = 1,000–1,500 K and P = 2–8 GPa was determined to occur at P (GPa) = 0.5 + 0.0034 × T (K). The transition pressure determined in this study was in general agreement with that observed in previous high-pressure experiments. However, the slope of the transition, dP/dT, determined in our study was significantly higher than that estimated by the previous study combined with the in situ X-ray method.     

Shaking table tests of steel frame with superelastic Cu–Al–Mn SMA tension braces

Shaking table tests are performed on a one‐bay one‐story steel frame with superelastic Cu–Al–Mn shape memory alloy (SMA) tension braces. The frame is subjected to a series of scaled ground motions recorded during the 1995 Kobe earthquake, Japan. The test results demonstrate that the SMA braces are effective to prevent residual deformations and pinching. It is also shown that the time history responses observed from the shaking table tests agree well with the numerical predictions using a rate‐independent piecewise‐linear constitutive model calibrated to the quasi‐static component tests of the SMA braces. This suggests that the loading rate dependence of Cu–Al–Mn SMAs as well as the modeling error due to the piecewise linear approximation can be neglected in capturing the global response of the steel frame. Numerical simulations under a suite of near‐fault ground motion records are further performed using the calibrated analytical models to demonstrate the effectiveness of the SMA braces when the variability of near‐fault ground motions is taken into account. A stopper, or a deformation restraining device, is also proposed to prevent premature fracture of SMA bars in unexpectedly large ground motions while keeping the self‐centering capability in moderate to large ground motions. The effectiveness of the stopper is also demonstrated in the quasi‐static component and shaking table tests. Copyright © 2015 John Wiley & Sons, Ltd.     

A new high-pressure phase of strontium carbonate

High-pressure and high-temperature experiments conducted in a laser-heated diamond-anvil cell with a synchrotron X-ray diffraction method have revealed a phase transformation in the aragonite-type SrCO₃ at pressures above 10 GPa. The new phase has an orthorhombic symmetry and was confirmed to remain stable to 32 GPa. The Birch-Murnaghan equation of state for new phase was determined from the experimental unit cell parameters, with K₀ = 101 (± 16) GPa, K₀ = 4 (constrained value), and V₀ = 111.9 (± 2.2). This transformation in SrCO₃ is different from that in BaCO₃ as reported in previous studies. After decompression at ambient pressure, the high-pressure phase transforms to a metastable structure, which has an orthorhombic symmetry. This result should also resolve a dispute regarding the stable high-pressure phases in BaCO₃, which is an analog material of CaCO₃ and SrCO₃.This revised version was published in February 2005 with corrections to the Introduction and to the References.     

Nonlinear wave effect on the slow drift motion of a floating body

The slow drift motion of a floating body in a two-dimensional wave field has been investigated using a time-domain, fully nonlinear numerical model with non-reflective open boundaries. Preliminary computations were conducted for incident bichromatic waves, in which wave theories with different orders were applied in generating the waves required. The results show that the use of low-order theories generates undesirable free waves, and that fourth-order terms contribute markedly to low-frequency input. The motion of a rectangular floating body in response to nonlinear bichromatic waves was computed. The numerical results for small-amplitude incident waves agree reasonably well with the second-order approximation for both the steady and difference-frequency (Δσ) components in the body's motion. For relatively large waves, however, the 2Δσ component becomes predominant compared with the Δσ component. The motion of the body in irregular waves with different wave parameters has also been presented in order to discuss the validity range of a second-order approximation.     

越南东北部Cat Ba岛泥盆系-石炭系过渡层的初探

The Pho Han Formation is exposed on southern Cat Ba Island, Hai Phong Province in northeastern Vietnam, and intercalates the Devonian and Carbonif-erous (D-C) boundary (Ta and Doan, 2007; Komatsu et al., 2012). The D-C boundary section consists mainly of limestone beds, numbered from 1 to 167, interca-lated with alternating black organic-rich shales. The limestone yields abundant brachiopods, crinoid-stems and conodonts. Preliminary investigations on strati-graphy (conodont biostratigraphy and δ13C) and sedi-mentology of beds 113-133 were undertaken in this study.     

Petrology of green polished stone axes of the Jomon period from the Sannai-Maruyama site,Japan, investigating the origin of source rock

Numerous green polished stone axes have been excavated from the Sannai-Maruyama site, one of Japan's largest archeological sites in the Jomon period (5.9–4.2 cal kyr BP). The axes are composed of weakly metamorphosed fine-grained volcaniclastic rock having a peculiar texture that includes numerous acicular actinolites growing in random directions within a quartz and albite matrix. Cobbles of Aotora stone found along the Nukabira River, Biratori town, southern Hokkaido, are the most likely raw material for these stone axes. Aotora stones have alternate bands of a soft dark-green picritic layer and a hard SiO₂-rich pale-green layer. The pale-green layer has a texture similar to the stone axes. Basaltic and picritic volcanic rocks of the Sorachi-Yezo Belt occupy the area along the Shidoni River, a tributary of the Nukabira River. Volcaniclastic rocks similar in texture, mineralogy, and bulk rock compositions to the Aotora stone are exposed in the area. These rocks underwent metamorphism under the actinolite-pumpellyite facies conditions. Their protolith is submarine hyaloclastic rocks that are intercalated with laminated picrite detritus. The stone axes, pale-green layers of Aotora stone, and those of the volcaniclastic rocks of the Shidoni River area all have high SiO₂ (~ 55 wt%), Cr (~ 840 μg/g), and Ni (~ 370 μg/g). The rare earth element patterns with abundant light rare earth elements and depleted heavy rare earth elements of stone axes were also consistent with the pale-green layers of the outcrop. These pale-green layers, interleaved with dark-green layers of picritic detritus, were the likely source rock of the stone axes. The high SiO₂ content in the pale-green layer caused the crystallization of quartz and albite in the matrix, which resulted in high-quality raw material for making stone axes.     

Density measurements of liquid Fe–Si alloys at high pressure using the sink–float method

The compositional dependence on the density of liquid Fe alloys under high pressure is important for estimating the amount of light elements in the Earth’s outer core. Here, we report on the density of liquid Fe–Si at 4 GPa and 1,923 K measured using the sink–float method and our investigation on the effect of the Si content on the density of the liquid. Our experiments show that the density of liquid Fe–Si decreases from 7.43 to 2.71 g/cm³ non-linearly with increasing Si content (0–100 at%). The molar volume of liquid Fe–Si calculated from the measured density gradually decreases in the compositional range 0–50 at% Si, and increases in the range 50–100 at% Si. It should be noted that the estimated molar volume of the alloys shows a negative volume of mixing between Fe and Si. This behaviour is similar to Fe–S liquid (Nishida et al. in Phys Chem Miner 35:417–423, 2008). However, the excess molar volume of mixing for the liquid Fe–Si is smaller than that of liquid Fe–S. The light element contents in the outer core estimated previously may be an underestimation if we take into account the possible negative value of the excess mixing volume of iron–light element alloys in the outer core.     

Compressibility of the calcium aluminosilicate, CAS, phase to 44 GPa

In situ X-ray diffraction measurements on a calcium aluminosilicate (CAS) phase have been carried out using a laser-heated diamond anvil cell up to a pressure of 44 GPa, employing a synchrotron radiation source. CAS is the major mineral formed from sediments subducted into the Earth's mantle. The sample was heated using a YAG laser after each pressure increment to relax the deviatoric stress in the sample. X-ray diffraction measurements were carried out at T = 300 K using an angle-dispersive technique. The pressure was calculated using an internal platinum metal pressure calibrant. The Birch–Murnaghan equation of state for the CAS phase obtained from the experimental unit cell parameters showed a density of ρ₀ = 3.888 g/cm³ and a bulk modulus of K₀ = 229 ± 9 GPa for K^′₀ = 4.7 ± 0.7. When the first pressure derivative of the bulk modulus was fixed at K^′₀ = 4, then the value of K₀ = 239 ± 2 GPa. From the experimental compressibility, the density of the CAS phase was observed to be lower than the density of co-existing Al-bearing stishovite, calcium perovskite, calcium ferrite-type phases, and (Fe,Al)-bearing Mg-perovskite in subducted sediments in the lower mantle. Therefore, the density of subducted sediments in the lower mantle decreases with increasing mineral proportion of the CAS phase.     

RC pile–soil interaction analysis using a 3D‐finite element method with fibre theory‐based beam elements

To evaluate the overall response of a structural system including its foundation and surrounding soil, an equivalent finite element model with reduced degrees of freedom using fibre theory‐based beam element was proposed. The proposed model was based on investigations of the subgrade soil reaction of a single‐layer model, and was verified for the cyclic behaviour of a laterally loaded single RC pile in terms of the load–displacement relationship, pile deformation, and soil pressures on the pile surface. Also investigated was the effect of the interfacial element between pile and soil on the behaviour of the laterally loaded pile. Copyright © 2006 John Wiley & Sons, Ltd.     

N and C Isotopic Compositions of the Lower Triassic of Southern Primorye and Reconstruction of Habitat Conditions of Marine Organisms after Mass Extinction at the End of the Permian

Data on the N and C isotopic composition are presented for the Lower Triassic claystones of the Abrek section of southern Primorye (Far East). The results showed five N isotopic intervals and several negative C isotopic excursions of the Induan–lower Olenekian stages of the Abrek section.