Phase relations of pumpellyite-actinolite facies metabasites in the Sanbagawa metamorphic belt in central Shikoku, Japan

Sanbagawa metabasites metamorphosed at conditions near the upper limit of the pumpellytic-actinolite facies were examined in terms of phase equilibria in the five component system Al₂O₃---Fe₂O₃---CaO---MgO---FeO. The Fe³⁺ content of epidote measured as X^Ep_Fe (=Fe/(Fe + Al) of epidote) in the assemblage epidote-chlorite-actinolite-pumpellyite decreases gradually towards the higher-grade, pumpellyite-free areas. The progressive change in X_Fe^Ep can be detected within one metabasite bed 200 meters thick near the upper limit of the pumpellyite-actinolite facies. The Mg---Fe²⁺ substitution, as expressed by variation of Fe/(Fe + Mg) in chlorite (0.40–0.55) has little effect on the Fe³⁺ + Al) ratios of epidote and pumpellyite in the above-mentioned assemblage. The lowet X_Fe^Ep in the pumpellite-bearing assemblage is 0.15 and hence the upper limit of the pumpellyite-actinolite facies is defined by the appearance of an epidote-chlorite-actinolite assemblage with X^Ep_Fc = C.15     

Pseudo-dynamic testing using conventional testing devices

This paper presents the development of a new type of pseudo-dynamic test system, in which a conventional static jack is utilized for loading. Two of the new hardware devices developed for the system are detailed: a hydraulic pump system that can adjust the rate of oil flow using an inverter motor, and a controller that controls the jack's motion with a displacement feedback signal transmitted from a digital displacement transducer. The unique advantages of the system are summarized as: larger force capacity achieved by the static jack, maximum use of hardware devices available in many existing structural testing laboratories, and flexibility for program development accomplished by separating tasks into multiple PCs. The reliability of the system is calibrated first by a pseudo-dynamic test for an SDOF system and then by a pseudo-dynamic test for a ten-storey building model having hysteretic dampers. For the latter test, substructuring techniques have been incorporated. The accuracy of the results obtained is discussed based upon the capacity of the system to control displacement and comparison with numerical results.     

Seasonal Variations in Abundance and Size Composition of the Lobate Ctenophore Bolinopsis Mikado (Moser) in Tokyo Bay, Central Japan

Surveys of the abundance and size composition of the ctenophore Bolinopsis mikado were conducted in Tokyo Bay over a 5-year period from 1990 to 1994. B. mikado appeared throughout the year, and its mass occurrence was observed between August and November; annual maximum abundance ranged from 19 to 91 ind. m^–2. Water temperature seems to influence the seasonal variation of B. mikado abundance. Environmental conditions (e.g. rough waters due to a typhoon) and predation by the beroid ctenophore Beroe cucumis appear to affect annual variations of B. mikado abundance. Size frequency distributions of B. mikado indicated that its reproduction was most active in summer and fall but occurred throughout the year in Tokyo Bay. A sharp decline of the copepod population in August 1990 was probably due to predation by B. mikado which was very abundant at that time; its predatory impact was estimated to be 24 % day^–1.     

The distribution of total and methylmercury concentrations in soils near the Idrija mercury mine, Slovenia, and the dependence of the mercury concentrations on the chemical composition and organic carbon levels of the soil

Although the mining activity of the Idrija mine in Slovenia ceased in 1995, a large amount of mining dregs containing high concentrations of mercury remains in the area. The mining dregs were transported with river flow and deposition along the Idrija River. To estimate the dispersion and change in the chemical form of mercury, a total of 28 soil core samples were taken around the river. The individual core samples were separated into layers for the analysis of their chemical composition, carbon contents, total mercury (T-Hg) and methylmercury (MeHg) concentrations. The chemical composition measured by X-ray fluorescence spectrometry was useful to estimate the dispersion of tailings: the fluvial terrace soil had a chemical composition similar to that of the tailings and could be distinguished clearly from the forest soil. The highest T-Hg concentration, 1,100 mg kg⁻¹, was observed in the fluvial terrace soil near the mine. Although the concentration decreased gradually along with distance from the mine, concentrations higher than 200 mg kg⁻¹ of T-Hg were still observed in the fluvial terrace soil approximately 20 km downstream from the mine. In the vertical distribution of T-Hg in the hillslope soil, a higher value was observed in the upper layers, which suggests the recent atmospheric deposition of mercury. The concentration of MeHg was the lowest at the riverside and higher in the hillslope soil, which was the opposite of the T-Hg distribution. The total organic carbon content tracked similarly with the distribution of MeHg and a linear relation with a significantly high correlation coefficient was obtained. The distinction may be related to the different dispersion process of mercury, and the organic carbon contents may be an important factor for MeHg formation.     

Resonant behaviour of MHD waves on magnetic flux tubes

The absorption of solar five-min oscillations by sunspots is interpreted as the resonant absorption of sound waves by a magnetic cylinder. The absorption coefficient is calculated both analytically under certain simplifying assumptions, and numerically under more general conditions. The observed magnitude of the absorption coefficient, which is up to 0.5 or even more, can be explained for suitable ranges of parameters. Limitations in the present model are also discussed.     

Evaluating metrics derived from Landsat 8 OLI imagery to map crop cover

Developing techniques are required to generate agricultural land cover maps to monitor agricultural fields. Landsat 8 Operational Land Imager (OLI) offers reflectance data over the visible to shortwave-infrared range. OLI offers several advantages, such as adequate spatial and spectral resolution, and 16 day repeat coverage, furthermore, spectral indices derived from Landsat 8 OLI possess great potential for evaluating the status of vegetation. Additionally, classification algorithms are essential for generating accurate maps. Recently, multi-Grained Cascade Forest, which is also called deep forest, was proposed, and it was shown to give highly competitive performance for classification. However, the ability of this algorithm to generate crop maps with satellite data had not yet been evaluated. In this study, the reflectance at 7 bands and 57 spectral indices calculated from Landsat 8 OLI data were evaluated for its potential for crop type identification.     

Optimum design and earthquake-response constrained design of elastic shear buildings

The necessary and sufficient conditions for global optimality and the closed form solution are derived for a problem of minimizing a weighted sum of storey stiffnesses of a shear building subject to a fundamental frequency constraint. A set of higher frequency formulae is derived for optimally designed shear buildings with equal masses. It is shown that, if the weight coefficients are regarded as parameters for adjustment, the distribution of the SRSS estimates of the maximum interstorey drifts can be adjusted so as to coincide with a specified one. The base shear–fundamental period formulae and the base shear–design drift formulae are derived semi-analytically for shear buildings with equal masses on the basis of the optimum design formulae and the SRSS estimates of the maximum interstorey drifts. Some numerical examples are presented in order to illustrate the validity of the proposed method of earthquake-response constrained design.     

Predominant hosting lead(II) in ternary mixtures of heavy metal ions by a novel of diethylaminomethyl-calix[4]resorcinarene

Heavy metal ions from single and ternary systems of Pb(II), Cu(II), and Ni(II) adsorbed by calix[4]resorcinarenes in water–chloroform extraction were studied. Comparison was made of calix[4]resorcinarenes, 2,8,14,20-tetraundecyl calix[4]resorcinarene-4,6,10,12,16,18,22,24-octol, and diethylaminomethyl-calix[4]resorcinarene, 5,11,17,23-tetra(diethylaminomethyl)-2,8,14,20- tetraundecylcalix[4]resorcinarene-4,6,10,12,16,18,22,24-octol, for predominant extraction of their ions from the ternary mixture of aqueous solution at different pH in a water layer. The hosting of Pb(II) by the diethylaminomethyl-calix[4]resorcinarene occurred efficiently at pH 6–7. The hosting of Pb(II), Cu(II), and Ni(II) ions for the ternary aqueous mixture was applied to the Langmuir isotherm. Adsorption was studied using nuclear magnetic resonance spectroscopy in a water–deuterium chloroform extraction system. Results showed that as the heavy metal ions were included into the host cavity, the observation of shifted peaks of water molecules from downfield to higher field was visible in the nuclear magnetic resonance spectra, meaning that water molecules were included with heavy metal ion into the host cavity. The spectra also showed that the diethylamino group expressed formation of the coordination complex between the diethylaminomethyl-calix[4]resorcinarene and Pb(II) for the purpose of predominant hosting of Pb(II).     

Topology of Magnetic Field and Coronal Heating in Solar Active Regions

Force-free magnetic fields can be computed by making use of a new numerical technique, in which the fields are represented by a boundary integral equation based on a specific Green's function. Vector magnetic fields observed on the photospheric surface can be taken as the boundary conditions of this equation. In this numerical computation, the following two points are emphasized: (1) A new method for data reduction is proposed, for removing uncertainties in boundary data and determining the parameter in this Green's function, which is important for solving the boundary integral equation. In this method, the transverse components of the observed boundary field are calibrated with a linear force-free field model without changing their azimuth. (2) The computed 3-D fields satisfy the divergence-free and force-free conditions with high precision. The alignment of these field lines is mostly in agreement with structures in Hα and Yohkoh soft X-ray images. Since the boundary data are calibrated with a linear force-free field model, the computed 3-D magnetic field can be regarded as a quasi-linear force-free field approximation. The reconstruction of 3-D magnetic field in active region NOAA 7321 was taken as an example to quantitatively exhibit the capability of our new numerical technique.