Short-term variation in copepod community and physical environment in the waters adjacent to the Kuroshio Current

A continuous survey examined short-term variations in the zooplankton community and physical ocean environment from the northeastern Izu Islands to Boso Peninsula in Japan. High copepod abundance and small upwellings in the surface layer and salinity minimum layer in the subsurface were observed on the north side of coastal fronts in the westernmost transect, moving southward as the Kuroshio Current left the Boso Peninsula. Thus, the salinity minimum layer might be a key factor forming upwelling and the fronts, leading to large abundance of coastal copepods off the northeastern Izu Islands. A community structure analysis of calanoid copepods revealed an intermediate belt assemblage between coastal and offshore (Kuroshio) assemblages. Copepod abundance was remarkably low and Ctenocalanus vanus dominated (nearly 37%) in the intermediate belt zone, indicating that C. vanus has a relatively high tolerance to adverse environments for calanoid copepods. As the Kuroshio Current left the Boso Peninsula, the coastal assemblage expanded in the same direction, and the intermediate belt assemblage off the northeastern Izu Islands disappeared. The largest population of Calanus sinicus was found along the two western transects off the northeastern Izu Islands (>1000 m depth), which was assumed to be transported from Sagami Bay and advanced southwestward while growing from copepodite stages CIII to CV. Larvae of C. sinicus would be an important food for fish larvae in addition to Paracalanus parvus s.l., the numerically dominant species in the coastal assemblage, and C. vanus under the adverse conditions for coastal copepods.     

Geotechnical sealing material for coastal disposal facility for soils and wastes contaminated by radioactive cesium

Safe disposal of wastes produced due to the process of decontamination in and around Fukushima No. 1 nuclear power plant is an urgent requirement. The purpose of this study was to develop a sealing material which can be used as an engineered barrier for a final disposal facility for the soils and wastes contaminated by radioactive cesium. The analyses conducted based on 4-m-thick sealing layer revealed that the hydraulic conductivity of the sealing material needs to be kept below 5.0?×?10^?10?m/s to avoid the seepage of contaminants below the environmentally safe limits. Sealing material was developed using marine clay–bentonite mixture and the engineering characteristics were examined. The results of laboratory experiments showed that, with the addition of bentonite, the hydraulic conductivity equal to or less than 5.0?×?10^?10?m/s was achieved when the effective consolidation stress is equal to or more than 27?kPa. From the tests for adsorption properties for cesium, it was found that the sealing material showed the significant capacity of adsorption for cesium in seawater. It was concluded that the construction of waste disposal facility on the sandy seafloor is feasible using the sealing layer proposed in this study.     

Subhorizontal tectonic framework of the Horoman peridotite complex and enveloping crustal rocks,south‐central Hokkaido,Japan

Geological observations in the Horoman area, south‐central Hokkaido, show that the Horoman peridotite complex of the Hidaka metamorphic belt is a tectonic slice about 1200 m thick. The peridotite slab is intercalated into a gently east‐dipping structure. The underlying unit is a Cretaceous–Paleogene accretionary complex. Riedel shear planes in the sedimentary layers of the accretionary complex near the structural bottom of the peridotite slab indicate top‐to‐the‐west (thrust) displacement. The overlying unit is composed of felsic–pelitic gneisses and mafic–felsic intrusive rocks (the Hidaka metamorphic rocks). The boundary surface between the peridotite complex and metamorphic rocks forms a domal structure. Microstructures of sheared metamorphic rocks near the structural top of the peridotite slab indicate top‐to‐the‐east (normal) displacement. The results combined with previous studies suggest that the Horoman peridotite complex was emplaced onto the Asian margin (Northeast Japan) during the collision between the Asian margin and the Hidaka crustal block.     

Measurement of iodine-129 in seawater samples collected from the Japan Sea area using accelerator mass spectrometry: Contribution of nuclear fuel reprocessing plants

The concentrations of ¹²⁹I in seawater samples from two sites (off Sekine and the Toyama Bay) in the Japan Sea were determined by accelerator mass spectrometry. The observed concentrations exceed amounts expected from natural origin and globally distributed fallout due to nuclear weapons testing. Because the fraction of natural origin and global fallout is 2% and 8.9–13.8%, respectively, the residual more than 80% of the concentration must come primarily from nuclear fuel reprocessing plants. This result indicates a rapid distribution of ¹²⁹I through atmospheric transport on a global scale. The depth distribution of ¹²⁹I at the Toyama Bay in the Japan Sea shows that the ¹²⁹I maximum is in the mixed layer and that concentrations decrease with depth. The inventory of ¹²⁹I in water column is four times higher than that measured in the Gulf of Mexico which has almost the same depth at the Toyama Bay. This higher inventory probably reflects: (1) the rapid water sinking in the Japan Sea, (2) the difference of distance in sampling locations with respect to major ¹²⁹I releasing plants and (3) the strong increase in emissions from nuclear fuel reprocessing plants after the profile of the Gulf of Mexico was taken.     

Observation of edge waves trapped on the continental shelf in the vicinity of Makurazaki Harbor, Kyushu, Japan

Sea-bottom pressure gauges were used to measure sea levels at two points on the shelf off the southern coast of Satsuma Peninsula, Kyushu, Japan. Spectral analysis of the observed records and the tide-gauge record of Makurazaki Harbor revealed several predominant common peaks. At the same time, the eigenmodes for the trapped waves on the shelf and inside Makurazaki Bay were obtained numerically using a two-dimensional model, and the periods and the spatial distribution of amplitudes of the proper modes were obtained. A comparison of the calculated modes with the periods and phase patterns of the observed peaks clarified that peaks with periods of 19.5, 16, 13.3, and 12.2 minutes in the shelf region were the modes of standing-edge waves, and the peak with the period of 16 minutes in Makurazaki Harbor was the fundamental mode of the harbor. Among the modes of standing-edge waves, the mode of the period 16 minutes on the shelf had nearly the same period as that of the fundamental mode of Makurazaki Harbor. An analysis of changes of spectral densities of these two modes confirmed that the fundamental mode of the Makurazaki Harbor was induced by this standing-wave mode.     

A k - *epsiv Turbulence Closure Model For The Atmospheric Boundary Layer Including Urban Canopy

A numerical model for the computation of the wind field,air temperature and humidity in the atmospheric boundary layer (ABL) including the urbancanopy was developed for urban climate simulation. The governing equations of the modelare derived by applying ensemble and spatial averages to the Navier–Stokes equation, continuityequation and equations for heat and water vapour transfer in the air. With the spatial averagingprocedure, effects of buildings and other urban structures in the urban canopy can be accounted for byintroducing an effective volume function, defined as the ratio between the volume of air in acomputational mesh over the total volume of the mesh. The improved k - model accounts for the anisotropyof the turbulence field under density stratification. In the improved k - model, the transportof momentum and heat in the vertical direction under density stratification is evaluated based onthe assumption of a near-equilibrium shear flow where transport effects on the stresses andheat fluxes are negligible. The heating processes at surfaces of buildings and ground are alsomodelled. The comparison of the computational results obtained with the present modeland existing observational data and numerical models shows that the present model is capableof predicting the structure of turbulence in the urban canopy layer under density stratification.Numerical experiments with the new model show that the flow behaviour of the air in the urbancanopy layer is strongly affected by the existence of buildings and density stratification.     

High-Mg diorites derived from sanukitic HMA magmas, Kyushu Island, southwest Japan arc: evidence from clinopyroxene and whole rock compositions

High-Mg diorites that have similar whole rock composition to high-Mg andesites (HMAs) should not be simply interpreted as rocks solidified from the HMA magmas, because the high-Mg diorites may be mafic cumulates derived from a different magma from the HMAs.

The HMAs contain unique clinopyroxenes with higher Mg# and Si than those of other sub-alkaline series igneous rocks. The Mg# and Si are controlled by the source magma composition rather than its crystallized conditions such as pressure and temperature. The chemical composition of clinopyroxenes would present important information for the investigation of the source of high-Mg diorites.

We considered the source of Early Cretaceous high-Mg diorites on Kyushu Island, southwest Japan arc, based on their clinopyroxene and whole rock compositions. The clinopyroxenes have similar chemical characteristics to those in HMAs rather than those in other sub-alkaline rocks. Moreover, the whole rock compositions are equivalent to the sanukitic HMA and do not show features of mafic cumulates. This indicates that the high-Mg diorites solidified from sanukitic HMA magmas. It is generally believed that the sanukitic HMA magmas involve the subduction of a young and/or hot oceanic slab was situated in their genesis. Therefore, the occurrence of the high-Mg diorites suggests that Kyushu was situated in the tectonic setting of young and/or hot slab subduction in the Early Cretaceous.     

Recalibration of mutually consistent garnet–biotite and garnet–cordierite geothermometers

Garnet–biotite and garnet–cordierite geothermometers have been consistently calibrated, using the results of Fe²⁺–Mg cation exchange experiments and utilizing recently evaluated nonideal mixing properties of garnet. Nonideal mixing parameters of biotite (including Fe, Mg, Al^VI, and Ti) and of cordierite (involving Fe and Mg) are evaluated in terms of iterative multiple least-square regressions of the experimental results. Assuming the presence of ferric Fe in biotite in relation to the coexisting Fe-oxide phases (Case A), and assuming the absence of ferric Fe in biotite (Case B), two formulae of garnet–biotite thermometer have been derived. The garnet–cordierite geothermometer was constructed using Margules parameters of garnet adopted in the garnet–biotite geothermometers. The newly calibrated garnet–biotite and garnet–cordierite thermometers clearly show improved conformity in the calculated temperatures. The thermometers give temperatures that are consistent with each other using natural garnet–biotite–cordierite assemblages within ±50 °C. The effects of ferric Fe in biotite on garnet–biotite thermometry have been evaluated comparing the two calibrations of the thermometer. The effects are significant; it is clarified that taking ferric Fe content in biotite into account leads to less dispersion of thermometric results.     

On the divergence of the ionospheric electric field around the westward travelling surge

The pattern of the ionospheric electric field around the westward travelling surge (WTS) is theoretically studied. This is obtained by solving the current continuity equation at the ionospheric altitude for temporal and spatial development of the field-aligned current density modelled as the WTS phenomenon. The results show that the divergence of the ionospheric electric field is significantly changed depending on the dawn-to-dusk convection electric field E₀ because of non-uniformity in the ionospheric conductivity: the ionospheric electric field diverges in the upward current region (around the head of the WTS) when a westward electric field E₀ of 10 mV m⁻¹ is uniformly applied. On the other hand, the ionospheric electric field converges without E₀. From the observational inference that the ionospheric electric field converges around the head of the WTS, it is suggested that the WTS phenomenon may not be accounted for by the discharging process in the presence of the enhanced dawn-to-dusk convection electric field and non-uniform conductivity as was studied by previous authors.