Verification of net primary production estimation method in the Mongolian Plateau using landsat ETM+data

We plan to estimate global net primary production (NPP) of vegetation using the Advanced Earth Observing Satellite-II (ADEOS-II) Global Imager (GLI) multi-spectral data. We derive an NPP estimation algorithm from ground measurement data on temperate plants in Japan. By the algorithm, we estimate NPP using a vegetation index based on pattern decomposition (VIPD) for the Mongolian Plateau. The VIPD is derived from Landsat ETM+multi-spectral data, and the resulting NPP estimation is compared with ground data measured in a semi-arid area of Mongolia. The NPP estimation derived from satellite remote sensing data agrees with the ground measurement data within the error range of 15% when all above-ground vegetation NPP is calculated for different vegetation classifications.     

柴达木北缘超高压变质带中的岛弧火山岩

青藏高原北部柴北缘发育一套与超高压变质带并行的早古生代岛弧火山岩带,岛弧火山岩以玄武岩类为主,包括一些中酸性岩类,岩石以普遍遭受绿片岩相蚀变为特征,区别于该地区普遍遭受角闪岩相区域变质的元古代的基性火山岩。该早古生代的岛孤火山岩显示三组地球化学特征:①VTG-Ⅰ,岛弧拉斑玄武岩(IAT);②VTG-Ⅱ,高Al次钙碱性-碱性过渡型玄武岩;③VTG-Ⅲ,较N-MORB更亏损的拉斑玄武岩(异常MORB)。研究认为前两组火山岩是成熟岛弧两个发育阶段的特征性产物:洋壳俯冲到陆壳的初用,由俯冲洋壳和地幔楔的部分熔融形成岛弧拉斑玄武岩(IAT),随着俯冲板块的速度加快和岛弧周围地壳的加厚,则形成钙碱性玄武岩(CA)、高Al玄武岩。第三组火山岩形成于弧间盆地,由亏损的地幔楔高度部分熔融形成比N-MORB亏损的的火山岩(异常MORB)。岛弧火山岩的锆石LA-ICP-MS法U-Pb年龄为514.2±8.5 Ma,说明柴北缘在早古生代发生过洋壳向陆壳的俯冲作用。鉴于该地区代表陆-陆俯冲作用的柴北缘超高压变质岩石也是形成于早古生代(494Ma),认为陆-陆俯冲作用发生在洋-陆俯冲作用之后,二者时间和空间相伴随。     

Duluth Complex apatites: Age reference material for LA–ICP–MS‐based fission‐track dating

Anorthositic series apatites of the Duluth Complex, Minnesota, USA, have high spontaneous fission‐track densities of up to ~10⁷ cm^–2 and a homogeneous age of ~900 Ma, allowing high‐precision fission‐track dating based on LA–ICP–MS U analysis. Absolute fission‐track dating, track‐length measurement and chemical composition analysis were performed to evaluate a cooling history, which is essential for age reference materials. Preliminary inverse modelling for a sample with a shortened track‐length distribution yielded a monotonic cooling history from ~100°C at 925 Ma. The apatites incur an over‐etching problem when employing the commonly used etching protocol involving 5.5 M HNO₃.     

Lunar photometric properties at wavelengths 0.5-1.6 μm acquired by SELENE Spectral Profiler and their dependency on local albedo and latitudinal zones

The lunar photometric function, which describes the dependency of the observed radiance on the observation geometry, is used for photometric correction of lunar visible/near-infrared data. A precise photometric correction parameter set is crucial for many applications including mineral identification and reflectance map mosaics. We present, for the first time, spectrally continuous photometric correction parameters for both sides of the Moon for wavelengths in the range 0.5-1.6 μm and solar phase angles between 5° and 85°, derived from Kaguya (SELENE) Spectral Profiler (SP) data. Since the measured radiance also depends on the surface albedo, we developed a statistical method for selecting areas with relatively uniform albedos from a nearly 7000-orbit SP data set. Using the selected data set, we obtained empirical photometric correction parameter sets for three albedo groups (high, medium, and low). We did this because the photometric function depends on the albedo, especially at phase angles below about 20° for which the shadow hiding opposition effect is appreciable. We determined the parameters in 160 bands and discovered a small variation in the opposition effect due to the albedo variation of mafic mineral absorption. The consistency of the photometric correction was checked by comparing observations made at different times of the same area on the lunar surface. Variations in the spectra obtained were lower than 2%, except for the large phase angle data in mare. Lastly, we developed a correction method for low solar elevation data, which is required for high latitude regions. By investigating low solar elevation data, we introduced an additional correction method. We used the new photometric correction to generate a 1° mesh global lunar reflectance map cube in a wavelength range of 0.5-1.6 μm. Surprisingly, these maps reveal that high latitude (?75°) regions in both the north and south have much lower spectral continuum slopes (color ratio r_1547.7nm/r_752.8nm ? 1.8) than the low and medium latitude regions, which implies lower degrees of space weathering.     

Roles of methane and carbon dioxide in geological processes on Mars

We discuss in this paper possible roles of methane and carbon dioxide in geological processes on Mars. These volatiles in the martian crust may migrate upward from their sources either directly or via various traps (structural, sedimentary, ground ice, gas hydrates). They are then likely emitted to the atmosphere by seepage or through diverse vent structures. Though gas hydrates have never been directly detected on Mars, theoretical studies favor their presence in the crust and polar caps; they could have played an important role as significant gas reservoirs in the subsurface. The martian gas hydrates would possibly be a binary system of methane and carbon dioxide occupying clathrate cavities. Landforms such as mud volcanoes with well-known linkage to gas venting are extensively distributed on Earth, and methane is the primary gas involved. Thus, identification of these landforms on Mars could suggest that methane and possibly carbon dioxide have contributed to geological processes of the planet. For example, we present a newly identified field in Chryse Planitia where features closely resembling terrestrial mud volcanoes occur widely, though with no observable activity. We also present results of a preliminary search for possible recent or present-day, methane-emission zones in the regions over which enrichments of atmospheric methane have been reported.     

Water quality and risk assessment of dug wells: a case study for a poor community in the city of São Paulo, Brazil

Sparsely populated areas, or peripheral communities commonly lack access to a public water supply and sewerage systems. The inhabitants of these areas must make use of excavated wells to provide their water needs, and cesspits for domestic wastewater disposal. These on-site sanitation systems can release pathogens and nutrients into shallow groundwater. These poor communities urgently require cheap and efficient techniques for the detection of sanitary conditions, in order to prevent contamination of the water resources supplied by dug wells. The sanitary risk assessment methodology, applied in an irregular settlement south of the city of São Paulo, was based on a questionnaire with yes/no questions (risk factors), which allowed the identification of problems related to the well construction and operation, and the presence of potential contamination sources in its vicinity. These risk factors were compared against nitrate and bacterial analysis using the clustering statistical method, to verify the relationship between contamination and certain aspects surveyed in the questionnaire. Questions that were more related to contaminated wells were those concerning the presence of cover and its integrity; gaps between mouth and cover; the surrounding pavement and presence of ground irregularities; infiltration in the well casing; water-suspended materials; and proximity to contamination sources. Contamination models based on variograms allowed to observe that bacterial contamination presented a strong localized component, which was associated frequently with the way residents handled the wells, whereas nitrate contamination was related more to a regional (spatial) component; that is, the distance between wells and cesspits.     

Variable Tsunami Sources and Seismic Gaps in the Southernmost Kuril Trench: A Review

In the southernmost Kuril Trench, the tsunami source regions vary their along-trench extent even among earthquakes occurring within the same segment. Recent studies suggest that the tsunami source of the 1952 Tokachi-oki earthquake (M 8.1) differs from but partially overlaps with that of the 2003 Tokach-oki earthquake (M 8.0). Furthermore, the along-trench extent among the earthquakes seems to differ between deep and shallow portions of the subduction interface. A seismic gap has been recognized along the deep subduction interface between the sources of the 1952 and 1973 earthquakes. We propose that the gap is now larger, including both shallow to deep portions of the interface between the 1973 and 2003 earthquakes. Variability in spatial extent of large subduction earthquakes in both along-trench direction and trench-normal direction makes it difficult to forecast future earthquakes in the southernmost Kuril Trench.     

The Cretaceous Ofuku Pluton and Its Relation to Mineralization in the Western Akiyoshi Plateau,Yamaguchi Prefecture,Japan

The relationship between the magmatism of the Cretaceous Ofuku pluton and mineralization in and around the Akiyoshi Plateau, Yamaguchi Prefecture, Japan was investigated using a combination of field observation, petrographic and geochemical analyses, K–Ar geochronology, and fluid inclusion data. The Ofuku pluton has a surface area of 1.5 × 1.0 km, and was intruded into the Paleozoic accretionary complexes of the Akiyoshi Limestone, Ota Group and Tsunemori Formation in the western part of the Akiyoshi Plateau. The pluton belongs to the ilmenite‐series and is zoned, consisting mainly of early tonalite and granodiorite that share a gradational contact, and later granite and aplite that intruded the tonalite and granodiorite. Harker diagrams show that the Ofuku pluton has intermediate to silicic compositions ranging from 60.4 to 77.9 wt.% SiO₂, but a compositional gap exists between 70.5 to 73.4 wt.% SiO₂ (anhydrous basis). Modal and chemical variations indicate that the assumed parental magma is tonalitic. Quantitative models of fractional crystallization based on mass balance calculations and the Rayleigh fractionation model using major and trace element data for all crystalline phases indicate that magmatic fractionation was controlled mainly by crystal fractionation of plagioclase, hornblende, clinopyroxene and orthopyroxene at the early stage, and quartz, plagioclase, biotite, hornblende, apatite, ilmenite and zircon at the later stage. The residual melt extracted from the granodiorite mush was subsequently intruded into the northern and western parts of the Ofuku pluton as melt lens to form the granite and aplite. The age of the pluton was estimated at 99–97 Ma and 101–98 Ma based on K–Ar dating of hornblende and biotite, respectively. Both ages are consistent within analytical error, indicating that the Ofuku pluton and the associated Yamato mine belong to the Tungsten Province of the San‐yo Belt, which is genetically related to the ilmenite‐series granitoids of the Kanmon to Shunan stages. The aplite contains Cl‐rich apatite and REE‐rich monazite‐(Ce), allanite‐(Ce), xenotime and bastnäsite‐(Ce), indicating that the residual melt was rich in halogens and REEs. The tonalite–granodiorite of the Ofuku pluton contains many three‐phase fluid inclusions, along with daughter minerals such as NaCl and KCl, and vapor/liquid (V/L) volume ratios range from 0.2 to 0.9, suggesting that the fluid was boiling. In contrast, the granite and aplite contain low salinity two‐phase inclusions with low V/L ratios. The granodiorite occupies a large part of the pluton, and the inclusions with various V/L ratios with chloride daughter minerals suggest the boiling fluids might be related to the mineralization. This fluid could have carried base metals such as Cu and Zn, forming Cu ore deposits in and around the Ofuku pluton. The occurrence and composition of fluid inclusions in the igneous rocks from the Akiyoshi Plateau are directly linked to Cu mineralization in the area, demonstrating that fluid inclusions are useful indicators of mineralization.     

Speciation of dissolved metals associated with organic matter in coastal seawaters

By combined use of chloroform extraction and Amberlite XAD-2 resin chromatography, metal-organic compounds dissolved in coastal seawaters of Harima Sound, the Seto Inland Sea, were separated into three groups: hydrophobic, hydrophilic neutral and basic, and hydrophilic acidic. The hydrophobic metal-organic compounds, which are associated with organic matter with molecular weight less than 300, accounted for only a small fraction of the metal-organic compounds; 6 % for Cu and an insignificant fraction for Fe, Mn and Zn. The hydrophilic metal-organic compounds with molecular weights between 100 and 1,500 were major components of the metal-organic compounds. The metals associated with the organic matter on average accounted for 12 % of the Fe, 11 % of the Mn, 7 % of the Zn and 23 % of the Cu of the reactive dissolved metals.