张北6.2级地震发生在小震条带上

分析晋、冀、蒙交界地区的地震分布格局,发现张北地震前存在小地震条带。条带由２０余年持续发生的小震组成,与华北地壳应力场最大剪切应力方向相同,是燕山－渤海地震构造带的西延段落。６．２级强震发生在条的东端。文中讨论了张北地震地点预测失误的原因,提出采用地震学和地震地质学交叉,融合的思路,分析观今小地震活动图象、震源机制资料,从构造学,运动学,动力学角度,研究地壳深部地震构造的方法。     

二滩水电站地震遥测台网持续时间震级的研制

利用二滩水电站地震遥测台网的速度量和位移量观测记录,收集了震级ＭＬ为０．４￣５．４的４６０次地震（Δ〈２１０ｋｍ）的振动持续时间３５００多条,制作了该台网的持续时间震级公式和便查表。在方法上,不同于通常的按一次或两次曲线拟合,而采取计算机自动分段按折线拟合的方法,以阻尼最小二乘法完成其计算;在资料上,先分台制作８个子台的持续时间震级公式,在此基础上选择仪器、台基及公式中参数相近的子台,制作了适用于     

A Simulation Study on the Evolution of Groundwater Circulation Systems in Cenozoic Basins of Northern China

Three Cenozoic basins-the Qaidam basin, the Weihe graben-type basin and the North China plain-which are different in climatic conditions, geological settings and run-off types, are selected for the study. Based on an analysis of background information of the transect along the middle-latitude region, studies of groundwater dynamics, geochemistry, simulation of water circulation of the main elements as well as isotopic chronology, the information on global changes is collected, the formation of groundwater circulation systems and their evolution under stacked impacts of natural conditions and human activities are discussed, and a correlation is made between the evolutionary features of the above systems in these basins since 25 ka B.P. All these have laid a good foundation for further generalizing the evolutionary model of land water in northern China.     

闽南地区综合防震减灾示范工程应急指挥中心硬件系统概述

本文详细介绍了福建闽南地区综合防震减灾示范工程一应急指挥系统的硬件构成,运作及其特点,并对存在的一些问题作了初步的探讨。     

重庆玉峡锶矿床中分散元素锶的超常富集机制

重庆玉峡锶矿床位于华蓥山构造带的南段。含矿岩系为下三叠统嘉陵江组二段一亚段的含藻含膏白云岩,含矿层位自下而上有三个矿层。矿层呈似层状、透镜状赋存于西山背斜北段的背斜转折端及相邻两翼的层间虚脱部位。矿石矿物有天青石、菱锶矿、钡天青石,脉石矿物为白云石、...     

中朝边境地区新生代火山岩系对比

通过对比中国长白山区和朝鲜白头山区新生代火山岩系的层序和同位素年代学资料,首次编制出中朝边境地区新生代火山岩系分布图和新生代火山喷发阶段对比表。其岩石化学和地球化学演化趋势表明,该区新生代火山完全有可能再次喷发。     

钻石颜色分级条件浅析

颜色是钻石4C评估中的一个重要指标,也是决定钻石档次和价格的一个重要依据。作者结合实践体会对颜色分级条件进行了分析,并提出了注意要点。     

从昭通地震破坏实例看山区地震地面破坏特点

1974年5月11日3时25分,东经104度,北纬28.2度我国云南省昭通境内发生M=7.1地震。宏观震中为大关县以北,木杆公社钟(杜)家坪附近。震中烈度为IX度。震区为拔海2000米的滇东北高原地区,地面经受强烈切刻,山高坡陡,尤其震区西部,地形尤显陡峻。地形的坡度一般均在30°以上,主要河流的坡降平均为2.53%。该区地质情况比较复杂。地层分布主要为二迭纪阳新统灰岩,峨眉山玄武岩,三迭纪飞仙关砂页岩等等。     

UPPER CRUSTAL VELOCITY STRUCTURE AND CONSTRAINING FAULT INTERPRETATION FROM SHUNYI-TANGGU REFRACTION EXPERIMENT DATA

The urban active fault survey is of great significance to improve the development and utilization of urban underground space, the urban resilience, the regional seismic reference modeling, and the natural hazard prevention. The Beijing-Tianjin metropolitan region with the densest population is one of the most developed and most important urban groups, located at the northeastern North China plain. There are several fault systems crossing and converging in this region, and most of the faults are buried. The tectonic setting of the faults is complex from shallow to deep. There are frequent historical earthquakes in this area, which results in higher earthquake risk and geological hazards. There are two seismicity active belts in this area. One is the NE directed earthquake belt located at the east part of the profile in northern Ninghai near the Tangshan earthquake region. The other is located in the Beijing plain in the northwest of the profile and near the southern end of Yanshan fold belt, where the 1679 M8.0 Sanhe-Pinggu earthquake occurred, the largest historical earthquake of this area. Besides, there are some small earthquake activities related to the Xiadian Fault and the Cangdong Fault at the central part of the profile.
The seismic refraction experiment is an efficient approach for urban active fault survey, especially in large- and medium-size cities. This method was widely applied to the urban hazard assessment of Los Angeles. We applied a regularized tomography method to modeling the upper crustal velocity structure from the high-resolution seismic refraction profile data which is across the Beijing-Tianjin metropolitan region. This seismic refraction profile, with 185km in length, 18 chemical explosive shots and 500m observation space, is the profile with densest seismic acquisition in the Beijing-Tianjin metropolitan region up to now. We used the trial-error method to optimize the starting velocity model for the first-arrival traveltime inversion. The multiple scale checker board tests were applied to the tomographic result assessment, which is a non-linear method to quantitatively estimate the inversion results. The resolution of the tomographic model is 2km to 4km through the ray-path coverage when the threshold value is 0.5 and is 4km to 7km through the ray-path coverage when the threshold value is 0.7. The tomographic model reveals a very thick sediment cover on the crystalline basement beneath the Beijing-Tianjin metropolitan region. The P wave velocity of near surface is 1.6km/s. The thickest sediment cover area locates in the Huanghua sag and the Wuqing sag with a thickness of 8km, and the thinnest area is located at the Beijing sag with a thickness of 2km. The thickness of the sediment cover is 4km and 5km in the Cangxian uplift and the Dacang sag, respectively. The depth of crystalline basement and the tectonic features of the geological subunits are related to the extension and rift movement since the Cenozoic, which is the dynamics of formation of the giant basins.
It is difficult to identify a buried fault system, for a tomographic regularization process includes velocity smoothing, and limited by the seismic reflection imaging method, it is more difficult to image the steep fault. Velocity and seismic phase variations usually provide important references that describe the geometry of the faults where there are velocity differences between the two sides of fault. In this paper, we analyzed the structural features of the faults with big velocity difference between the two sides of the fault system using the velocity difference revealed by tomography and the lateral seismic variations in seismograms, and constrained the geometry of the major faults in the study region from near surface to upper crust. Both the Baodi Fault and the Xiadian Fault are very steep with clear velocity difference between their two sides. The seismic refraction phases and the tomographic model indicate that they both cut the crystalline basement and extend to 12km deep. The Baodi Fault is the boundary between the Dachang sag and the Wuqing sag. The Xiadian Fault is a listric fault and a boundary between the Tongxian uplift and the Dachang sag. The tomographic model and the earthquake locations show that the near-vertical Shunyi-Liangxiang Fault, with a certain amount of velocity difference between its two sides, cuts the crystalline basement, and the seismicity on the fault is frequent since Cenozoic. The Shunyi-Liangxiang Fault can be identified deep to 20km according to the seismicity hypocenters.
The dense acquisition seismic refraction is a good approach to construct velocity model of the upper crust and helpful to identify the buried faults where there are velocity differences between their two sides. Our results show that the seismic refraction survey is a useful implement which provides comprehensive references for imaging the fault geometry in urban active fault survey.     

应变-滑劈理的结构分析

应变-滑劈理(Strain-slip cleavage)一词,早在1886年提出。后来的研究者提出了相应的术语,诸如滑劈理(Slip cleavage)、皱劈理(Runzel cleavage)、剪劈理(shearcleavage)、锯齿形劈理(Crenulation cleavage)等。