渤海湾巨葛庄贝壳堤与下伏泥层有孔虫组合的海面变化意义

根据巨葛庄贝壳堤及下伏泥层的有孔虫研究,讨论了贝壳堤底板和下伏泥层各类沉积环境的海面意义,以此作为海面标志点重建的古海面误差范围为±0.225~±0.625m。结合该贝壳堤底板和下伏泥层顶板的年龄数据,重建了3900~3300cal BP时的海面高度为-2.955~-2.715m。     

浮托安装进船过程中护舷碰撞力实测研究

浮托安装法广泛应用于大型组块海上安装。导管架平台上部组块浮托安装进船过程中,风、浪、流引起的浮托驳船横向运动造成浮托驳船与导管架桩腿的碰撞,碰撞力可能会对导管架结构造成损伤。陆丰7-2上部组块浮托安装中,为了监测碰撞力大小,设计了碰撞力海上监测系统。通过在导管架外侧四个桩腿上安装光纤光栅应变传感器对碰撞过程中导管架桩腿进行应力监测,进而计算碰撞力。对碰撞过程,载荷作用位置、方向进行简化,并对载荷大小及垂向作用位置对计算的影响进行了研究。结构分析模型简化后,测点von-Mises应力与碰撞力大小成正比,对导管架整体结构建模计算并取局部结构计算比例系数,结合应力实测数据计算出进船过程中驳船对导管架桩腿碰撞力。     

Tectono–Thermal Evolution, Hydrocarbon Filling and Accumulation Phases of the Hari Sag, in the Yingen–Ejinaqi Basin, Inner Mongolia, Northern China

This work restored the erosion thickness of the top surface of each Cretaceous formations penetrated by the typical well in the Hari sag, and simulated the subsidence burial history of this well with software BasinMod. It is firstly pointed out that the tectonic subsidence evolution of the Hari sag since the Cretaceous can be divided into four phases: initial subsidence phase, rapid subsidence phase,uplift and erosion phase, and stable slow subsidence phase. A detailed reconstruction of the tectonothermal evolution and hydrocarbon generation histories of typical well was undertaken using the EASY R_0% model, which is constrained by vitrinite reflectance(R_0) and homogenization temperatures of fluid inclusions. In the rapid subsidence phase, the peak period of hydrocarbon generation was reached at c.a.105.59 Ma with the increasing thermal evolution degree. A concomitant rapid increase in paleotemperatures occurred and reached a maximum geothermal gradient of about 43-45℃/km. The main hydrocarbon generation period ensued around 105.59-80.00 Ma and the greatest buried depth of the Hari sag was reached at c.a. 80.00 Ma, when the maximum paleo-temperature was over 180℃.Subsequently, the sag entered an uplift and erosion phase followed by a stable slow subsidence phase during which the temperature gradient, thermal evolution, and hydrocarbon generation decreased gradually. The hydrocarbon accumulation period was discussed based on homogenization temperatures of inclusions and it is believed that two periods of rapid hydrocarbon accumulation events occurred during the Cretaceous rapid subsidence phase. The first accumulation period observed in the Bayingebi Formation(K_1 b) occurred primarily around 105.59-103.50 Ma with temperatures of 125-150℃. The second accumulation period observed in the Suhongtu Formation(K_1 s) occurred primarily around84.00-80.00 Ma with temperatures of 120-130℃. The second is the major accumulation period, and the accumulation mainly occurred in the Late Cretaceous. The hydrocarbon accumulation process was comprehensively controlled by tectono-thermal evolution and hydrocarbon generation history. During the rapid subsidence phase, the paleo temperature and geothermal gradient increased rapidly and resulted in increasing thermal evolution extending into the peak period of hydrocarbon generation,which is the key reason for hydrocarbon filling and accumulation.     

Isotope Geochronologic and Geochemical Constraints on the Magmatic Associations of the Collisional Orogenic Zone in the West Kunlun Orogen,China

The Jiajiwaxi pluton in the southern portion of the West Kunlun Range can be divided into two collision–related intrusive rock series, i.e., a gabbro–quartz diorite–granodiorite series that formed at 224±2.0 Ma and a monzonitic granite–syenogranite series that formed at 222±2.0 Ma. The systematic analysis of zircon U-Pb geochronology and bulk geochemistry is used to discuss the magmatic origin(material source and thermal source), tectonic setting, genesis and geotectonic implications of these rocks. The results of this analysis indicate that the parent magma of the first series, representing a transition from I-type to S-type granites, formed from thermally triggered partial melting of deep crustal components in an early island–arc–type igneous complex, similar to an I-type granite, during the continental collision orogenic stage. The parent magma of the second series, corresponding to an S-type granite, formed from the partial melting of forearc accretionary wedge sediments in a subduction zone in the late Palaeozoic–Triassic. During continued collision, the second series magma was emplaced into the first series pluton along a central fault zone in the original island arc region, forming an immiscible puncture-type complex. The deep tectonothermal events associated with the continent–continent collision during the orogenic cycle are constrained by the compositions and origins of the two series. The new information provided by this paper will aid in future research into the dynamic mechanisms affecting magmatic evolution in the West Kunlun orogenic belt.     

First Report of Zircon U‐Pb Ages from Lubei Cu‐Ni Sulfide Deposit in East Tianshan of Central Asian Orogenic Belt,NW China

正Objective The East Tianshan mafic-ultramafic rocks belt mainly produced in the eastern Jueluotage belt is an important part of the Central Asia Orogenic Belt(CAOB).The wellknown deposits including Huangshan,Huangshandong,Tulaergen,Hulu,Xiangshan were have been consecutively discovered in this belt(Duan Xingxing et al.,2016).The new discovery of the Lubei Cu-Ni sulfide deposit in recent     

高压超高压变泥质岩适用的地质温压计评述

高压超高压变泥质岩形成温压条件及p-T演化轨迹是高压超高压变质作用研究的重要内容。本文介绍了高压超高压变泥质岩适用的几种地质温压计,包括石榴子石-多硅白云母Fe~(2+)-Mg交换温度计、石榴子石-绿泥石Fe~(2+)-Mg交换温度计、硬绿泥石-绿泥石Fe~(2+)-Mg交换温度计、多硅白云母Si含量压力计、金红石Zr含量温度计、榍石Zr含量温压计、锆石Ti含量温度计、石英Ti含量温度计以及氧同位素温度计,并对上述温压计的适用条件及使用时的注意事项做了简要评述。     

地物化方法在航磁异常查证中的应用

航磁异常查证是矿产勘查中的一个重要环节,其目的是通过地面查证,确定异常是否存在,追踪异常源,了解异常源所处的地质环境,对异常作出客观评价,提出进一步工作的建议,为后续资料解释提供依据.通过使用地物化综合方法对黑C-2011-02243号异常查证发现：地质剖面测量和土壤地球化学测量可在地表发现较好的找矿线索;高精度磁测及激电中梯测量则反映了深部地质体及矿化特征.依据查证结果认为,在进行航磁异常查证工作时,可优先进行剖面性的地质、高精度磁法及土壤地球化学测量工作;在分析上述测量结果的基础上安排剖面性的电法测量;如存在进一步找矿信息,可安排面积性物化探测量及工程验证工作.     

华北板块东南缘徐淮推覆-褶皱带的物理模拟

徐淮地区发育一系列推覆-褶皱带,以皇藏峪背斜为界,区域剖面分为具有明显构造差异的东部、西部构造带,其中东部构造带样式主要表现为斜歪褶皱,西部构造带为一系列逆冲推覆构造,构造变形强烈。采用物理模拟手段对徐淮推覆-褶皱带构造的控制因素进行实验研究,选取硅胶、微玻璃珠模拟不同性质滑脱层,石英砂模拟沉积脆性盖层,改变盖层与基底摩擦力、滑脱层深度变化等控制因素。模拟结果表明,剖面上滑脱层性质及深度变化控制区域剖面构造的强弱变化。皇藏峪背斜以东主要以新元古界青白口系泥灰岩充当滑脱层,滑脱层深度大,构造样式主要表现为斜歪褶皱;皇藏峪背斜以西则以寒武系页岩为滑脱层,滑脱层深度小,构造样式主要表现为逆冲推覆构造。     

浙江新昌早白垩世木化石新材料及内含真菌菌丝化石

浙江新昌下白垩统馆头组是我国南方地区为数不多的白垩纪木化石产出层位。本文报道了新昌地区馆头组木化石新材料及其内含真菌菌丝化石。木化石具明显生长轮,管胞径壁纹孔南洋杉式(多数单列、椭圆形、紧挤排列,偶见双列互生排列);交叉场纹孔南洋杉式;木射线单列式,多数2~11个细胞高。当前木化石新材料具有与现生南洋杉科植物相类似的木材解剖特征,显示其应归入贝壳杉型木属(Agathoxylon Hartig)。鉴于该类型木化石的分类现状仍有待厘清,将其定为Agathoxylonsp.。木化石内含真菌菌丝化石,管状,具横隔,平直或弯曲,常以不同角度分叉,菌丝壁光滑,具典型的锁状联合,属于担子菌类。当前木化石木材组织具有明显的木材腐朽特征,与现代真菌造成的木材白腐一致,推断此真菌化石为木材白腐菌。新昌地区贝壳杉型木属木化石新材料的发现进一步丰富了馆头组木化石的多样性,有助于增进对南方地区早白垩世植物群组成特征的认识。当前真菌菌丝化石是我国南方地区首次发现白垩纪担子菌化石,为探究白垩纪时期森林生态系统真菌与植物的相互作用提供了新的化石证据。     

豫西崤山东部中河岩体锆石U-Pb年龄、地球化学和Lu-Hf同位素特征

中河花岗斑岩体位于河南省崤山东部,该岩体是最近发现的中河大型银铅锌矿床的成矿母岩。选取2件花岗斑岩样品进行LA-ICP-MS锆石U-Pb定年,获得2件样品的~(206)Pb/~(238)U年龄加权平均值分别为(129±0.7)Ma(MSWD=0.78)和(131±1.5)Ma(MSWD=1.70),表明中河岩体形成于早白垩世。岩石地球化学特征显示,中河岩体具有高的w(SiO_2)和w(K_2O)、低的w(Na_2O),其A/CNK比值为1.03~1.63,Mg#值介于25~50,总体上属于过铝质-强过铝质的高钾钙碱性系列。岩石具有低的w(Yb),中等-弱的铕负异常,稀土元素配分曲线为轻稀土元素富集型,轻稀土元素分馏相对强烈,但重稀土元素分馏不明显。中河岩体有相对低的w(Sr)和w(Y),且富集大离子亲石元素Rb、Ba、U、K和轻稀土元素,亏损高场强元素Nb、Ta、P、Zr、Hf、Ti和重稀土元素。中河岩体锆石εHf(t)值为-34.4~-23.2,平均为-26.9,Hf同位素二阶段模式年龄介于2485~3182 Ma,平均为2714 Ma。岩石地球化学特征及Hf同位素组成表明中河岩体的岩浆源区主要为新太古代地壳物质,并有少量的中太古代地壳物质,中-新太古代增生的具有弧岩浆特征的地壳物质部分熔融形成了早白垩世的中河岩体。