基于单元复制的通用化离散格网系统生成算法

本文提出一种基于单元复制的通用化格网系统生成新算法。其核心是采用"简单单元复制+有效区域控制"。首先,建立坐标系,确定待计算剖分格网系统的种类,从而确定格网剖分类型的3个关键因素。在此基础上,确定各类多尺度格网有效控制边界。然后对多尺度格网进行合适的数学变换,计算单一三角面格网系统单元节点坐标,并建立不同层级单元节点的关联关系。最后,以六边形格网为例展开验证,直接生成正二十面体表面格网。实验结果证明,该算法具有很好的通用性,可以通过调整相应的起算参数,生成各类多尺度格网。避免了传统定制算法的局限性,实现了统一化生成各类格网系统的目标,为不同剖分类型全球离散格网系统间互操作性问题研究提供了一种解决思路。     

Effect of Aspect on Climate Variation in Mountain Ranges of Shennongjia Massif,Central China

The aim of this study was to better understand the mechanisms of regional climate variation in mountain ranges with contrasting aspects as mediated by changes in global climate. It may help predict trends of vegetation variations in native ecosystems in natural reserves. As measures of climate response, temperature and precipitation data from the north, east, and south-facing mountain ranges of Shennongjia Massif in the coldest and hottest months(January and July), different seasons(spring, summer, autumn, and winter) and each year were analyzed from a long-term dataset(1960 to 2003) to tested variations characteristics, temporal and spatial quantitative relationships of climates. The results showed that the average seasonal temperatures and precipitation in the north, east, and south aspects of the mountain ranges changed at different rates. The average seasonal temperatures change rate ranges in the north, east, and south-facing mountain ranges were from –0.0210℃/yr to 0.0143℃/yr, –0.0166℃/yr to 0.0311℃/yr, and –0.0290 ℃/yr to 0.0084℃/yr, respectively, and seasonal precipitation variation magnitude were from –1.4940 mm/yr to 0.6217 mm/yr, –1.6833 mm/yr to 2.6182 mm/yr, and –0.8567 mm/yr to 1.4077 mm/yr, respectively. The climates variation trend among the three mountain ranges were different in magnitude and direction, showing a complicated change of the climates in mountain ranges and some inconsistency with general trends in global climate change. The climate variations were significantly different and positively correlated cross mountain ranges, revealing that aspects significantly affected on climate variations and these variations resulted from a larger air circulation system, which were sensitive to global climate change. We conclude that location and terrain of aspect are the main factors affecting differences in climate variation among the mountain ranges with contrasting aspects.     

武汉主城区液化潜能分区研究

搜集并整理武汉主城区地震安全性评价控制性钻孔SPT-N资料,配合武汉市地震动参数小区划成果,采用规范法对各场地土层在罕遇地震作用下液化可能性进行判别。以液化指数作为分区指标并结合各场地坐标,绘制武汉主城区液化潜能分区图。分区图初步预测了罕遇地震发生以后,可能发生液化的区域及其严重性,且表明无论是分布面积还是液化潜能,长江右岸均大于长江左岸。通过与4次历史大震液化资料的对比分析,武汉主城区可能液化场地具有地下水位埋深浅、液化土层分布范围广、埋藏深度大的特点。     

四川省CORS网地壳运动速度场模型研究

使用GAMIT/GLOBK解算2006~2015年覆盖四川地区的50个CORS站的观测数据,并提取坐标时间序列,获得速度场模型。对四川省整体地壳运动以及区域应变场进行分析,结果表明,四川省CORS站水平方向平均速度为38.72 mm/a,速度场的优势方向为S73.9°E;欧亚框架下水平方向平均速度为14.40 mm/a,优势方向为S77.78°E,较ITRF2008框架下的速度降低了24.32 mm/a;垂直方向平均速度为3.43 mm/a,整体上表现为隆升状态,位于东部平原的少部分测站处于下降趋势,可能是由于城市建设、地下水或者煤矿、石油等自然资源的过度采伐导致;最大主应变率达到7.31×10-11/a,最小主应变率为-5.4×10-11/a,其中区域地壳面膨胀率高值区域集中在川西,低值区域和最大剪切应变率高值区域分布在三大断裂带附近。     

Influence of Spatial-Temporal and Environmental Factors on Larimichthys polyactis,Octopus variabilis,and Species Aggregated Set-Net CPUEs in Haizhou Bay,China

Set-nets are common alongshore fishing gear used in Haizhou Bay, which rely on flow to catch fish. The catch per unit effort(CPUE) of set-net is affected by spatial-temporal and environmental factors but no research has been conducted on this subject. In this study, we used generalized additive models(GAMs) to explore the influence of spatial-temporal and environmental factors on CPUEs of species aggregated, small yellow croaker(Larimichthys polyactis), and octopus(Octopus variabilis) based on logbooks investigations conducted at 4 stations in an alongshore area of Haizhou Bay from 2011 to 2012. The results showed that all CPUEs exhibited significant spatial-temporal differences at various scales. Aggregated CPUE was high when the sea surface temperature(SST) was 15-18℃ and 20-23℃, which was mainly determined by life history traits of the octopus and small yellow croaker(optimal SSTs 14-17℃ and 19-24℃, respectively). Chlorophyll-a concentration had significant influences on the aggregated, small yellow croaker and octopus CPUEs at optimal ranges of 3.8-6.2 mg m~(-3), 4.2-4.8 mg m~(-3) and 4.5-5.5 mg m~(-3), respectively. Flow through the net had positive relationships with CPUEs. The approximate logarithmic trends in regression curves had a critical point of 2.5 Mm~3 d~(-1), which was the dividing point that differentiated whether the major factor affecting CPUEs was the flow velocity or the fishery resource. Our results from this study will help guide fishery production and improve catch rate of set-net fishing in Haizhou Bay.     

南海北部冷泉区深水珊瑚的发现及其特征

冷水珊瑚也称为深水珊瑚, 在生物多样性、生态资源和科研价值等方面具有重要意义。文章对采自南海北部冷泉区的冷水珊瑚骨骼碎屑进行测定, 鉴定出冷水珊瑚2个种(Crispatotrochus sp.1和Crispatotrochus sp.2), 以及4个属[Balanophyllia (Balanophyllia)、Balanophyllia (Eupsammia)、Lochmaeotrochus和Enallopsammia]。测定的冷水珊瑚的δ¹³C为-7.36‰~-1.15‰, δ¹⁸O为-1.38‰~3.67‰, 与全球冷水珊瑚碳氧同位素组成相似, 但明显不同于南海暖水珊瑚、冷泉碳酸盐岩及低温热液成因碳酸盐岩的碳氧同位素组成。     

南海北部东沙海域天然气水合物分解事件及其与海底滑塌的关系

东沙海域是南海北部一个重要的天然气水合物成藏区, 其陆坡广泛发育滑塌构造。文章对采自东沙陆坡中部973-4柱样和下部平坦区973-5柱样开展了沉积学粒度、底栖有孔虫种属特征和稳定同位素等的综合分析。研究结果表明: 两个柱样中底栖有孔虫的δ¹³C在末次冰期均出现明显负偏现象, 同时δ¹⁸O增高, 指示该时期东沙海域存在持续的天然气水合物分解事件; 末次冰消期以来, δ¹³C负偏现象逐渐消失, δ¹⁸O值降低, 可能是由于海平面上升阻止了天然气水合物分解。973-4柱样仅在末次盛冰期对应层位440~600cm段存在明显的滑塌沉积, 且该层段对应的特征底栖有孔虫Uvigerina spp.和Bulimina spp.的数量突增, 推测该区的海底滑塌可能是由于末次盛冰期海平面大幅度下降引起天然气水合物大量分解诱发所致; 973-5柱样同样记录到了海底滑塌现象, 但其滑塌沉积晚于973-4柱样的滑塌时间, 且其规模较小。     

基于分布式控制力矩陀螺的水下航行器轨迹跟踪控制

基于控制力矩陀螺群(CMGs)的水下航行器具有低速或零速机动的能力。采用基于分布式CMGs的水下航行器方案,并研究其水平面的轨迹跟踪控制问题。通过全局微分同胚变换将非完全对称的动力学模型解耦成标准欠驱动控制模型,并根据简化的模型构建其轨迹跟踪的误差动力学模型,将轨迹跟踪控制问题转化为误差模型镇定问题。基于一种分流神经元模型和反步法设计了系统的轨迹跟踪控制律,该控制器不需要对任何虚拟控制输入进行求导计算,且能确保跟踪误差的最终一致有界性。仿真结果表明该控制器能够实现在不依赖动力学参数先验知识的情况下对光滑轨迹的有效跟踪。     

深水海底管道铺设安全辅助系统

此次研发的铺管安全辅助系统是一套自动化、简易化、旨在提高安装经济性和安全性的实时运行安全辅助系统,通过实时数据采集及处理,达到对安装期海管强度进行实时监测目的。系统组成包括设备系统和监测软件两部分。设备为系统提供辅助决策数据源;监测软件采用C++语言编写,用于数据接收、解析,并通过OrcaFlex API调用商业有限元软件OrcaFlex为分析内核进行实时分析计算,以可视化界面输出管道应力、应变、触地点等信息,给予船上作业人员安全指导,及时作出决策。     

五味安神颗粒干法制粒工艺优化研究

目的：提高五味安神颗粒的产品质量,优化制备工艺。方法：通过单因素试验优化颗粒的制备工艺,以辊压制粒后的干颗粒粒径分布为考核指标,对影响干压制粒的轧辊压力、轧辊转速和物料的传送速度进行考察。结果：优化后的干法制粒工艺中间体颗粒得率达到64%,工艺参数为螺旋转速120rpm,轧辊转速26rpm,轧辊间隙0.8mm,整粒转速150rpm,工作压力120bar,整粒孔径1.5mm。结论：干法制粒工艺制备的中间体颗粒符合质量要求。