大型现场室内两用直剪仪研制（Ⅱ）：试验测试

利用新近研制的大型现场室内两用直剪仪，对两种不同性质的砂样进行了剪切试验。在对干砂的直接剪切试验特性进行综述的基础上，从多方面对该大型直剪仪得出的干砂剪切试验数据进行了分析验证，结果表明该大型直剪仪得出的试验数据一致性好、可靠性较高，说明该大型直剪仪的基本剪切性能稳定，可进一步应用于相关岩土材料的试验研究。     

Hydrogeochemical processes and quality assessment of groundwater in Dumka and Jamtara districts, Jharkhand, India

The hydrogeochemical study of groundwater in Dumka and Jamtara districts has been carried out to assess the major ion chemistry, hydrogeochemical processes and groundwater quality for domestic and irrigation uses. Thirty groundwater samples were collected and analyzed for pH, electrical conductivity, total dissolved solids (TDS), total hardness, anions (F^?, Cl^?, NO₃ ^?, HCO₃ ^?, SO₄ ^2?) and cations (Ca²⁺, Mg²⁺, Na⁺, K⁺). The analytical results show the faintly alkaline nature of water and dominance of Mg²⁺ and Ca²⁺ in cationic and HCO₃ ^? and Cl^? in anionic abundance. The concentrations of alkaline earth metals (Ca²⁺?+?Mg²⁺) exceed the alkali metals (Na⁺?+?K⁺) and HCO₃ ^? dominates over SO₄ ^2??+?Cl^? concentrations in the majority of the groundwater samples. Ca?CMg?CHCO₃ is the dominant hydrogeochemical facies in 60?% of the groundwater samples, while 33?% samples occur as a mixed chemical character of Ca?CMg?CCl hydrogeochemical facies. The water chemistry is largely controlled by rock weathering and ion exchange processes with secondary contribution from anthropogenic sources. The inter-elemental correlations and factor and cluster analysis of hydro-geochemical database suggest combined influence of carbonate and silicate weathering on solute acquisition processes. For quality assessment, analyzed parameter values were compared with Indian and WHO water quality standards. In majority of the samples, the analyzed parameters are well within the desirable limits and water is potable for drinking purposes. Total hardness and concentrations of TDS, Cl^?, NO₃ ^? _, Ca²⁺ and Mg²⁺ exceed the desirable limits at a few sites, however, except NO₃ ^? all these values were below the highest permissible limits. The calculated parameters such as sodium adsorption ratio, percent sodium (%Na) and residual sodium carbonate revealed excellent to good quality of groundwater for agricultural purposes, except at few sites where salinity and magnesium hazard (MH) values exceeds the prescribed limits and demands special management.     

The effect that coarse particles have on estimates of both optical and radiation characteristics of dust aerosol

Based on mathematical simulation, quantitative estimates of the effect that coarse dust particles have on the accuracy of retrieving the optical characteristics of aerosol have been obtained from the results of ground-based measurements of the spectral fluxes of both direct and scattered solar radiations. The results of verifying a retrieval algorithm (used at the AERONET ground-based network) based on special test models showed that the aerosol characteristics retrieved with this algorithm are unsuitable for calculating integral solar fluxes and for simulating space spectrometric IR measurements when the concentration of dust particles in the atmosphere exceeds their concentration in the well-known CONT model of continental aerosol by a factor of two or more.     

Review on physical models of lunar brightness temperature

Brightness temperature is a main index to reflect the energy of microwave radiation of an object. Using lunar brightness temperature data, physical properties of lunar regolith, such as thickness, heat flow and dielectric permittivity, could be interpreted. There are two methods to study brightness temperature distribution of the moon: the first is used to measure lunar brightness temperature by radio observation or spaceborne microwave radiometers, and the second is used to simulate calculation by the physical model. On the basis of the measurements of lunar brightness temperature in the history, this study analyzed the main physical model of lunar brightness temperature, also including its theory and influence factors. The authors concluded that surface and subsurface temperatures of the moon, dielectric properties and layered structure of lunar regolith were the main factors affecting the global brightness temperature of the moon. These factors should be quantified in detail in the future research.     

Numerical Simulation Of Oil/Oily-Contaminant Migration And Entrapment In A Lenticular Reservoir

Numerical simulations show that water and oil/oily-contaminant migration are controlled by regional fluid-potential fields which may be modified locally by highly permeable lenses and buoyancy. In addition, fluid potentials are coupled to the distribution of oil/oily-contaminant via relative permeability and capillary-pressure curves. As saturation distributions evolve through space and time, so do the water and oil fluid-potential surfaces. The importance of capillary forces in oil contaminant migration and entrapment is illustrated by the fact that, in certain cases, lenses fill from above, even when the migrating fluid is lighter than water. Capillary forces operating in conjunction with lenticular reservoirs create excellent dynamic oil traps by allowing free passage of water, while retaining and concentrating oil. The analysis of oil (oily-contaminant) migration using numerical modeling and potentiometric-surface techniques is useful for the prediction of migration pathways and potential accumulation sites. On the other hand, identifying acatual accumulations from fluid-potential measurements (via inverse modeling) is not possible because fluid potentials are not uniquely dependent on saturation.     

X-ray absorption contrast images of binary chemical reactions

Low-divergence synchrotron-sourced X-rays enable a radiographic imaging scheme for full characterization of binary chemical reactions and characterization by type of more complex reactions, in situ, in diamond anvil cells (DAC). Spatially resolved reactants are induced to react by laser heating of their interface. The spatially intermediate products are observed through X-ray absorption contrast. Limits to the technique include the ability to maintain controlled experiment geometry during compression and the ability to resolve chemical differences between reactants and products by X-ray absorption. The ability to make in situ observations at experimental pressure and temperature obviates the problem with quenching techniques for capturing liquid compositions in experiments with dimensions smaller than the diffusion length during quenching time. Partially molten Fe-alloy systems, of poor quenchability, are examined at DAC pressures and temperatures for relevance to Earth's core constitution and evolution. Determinations of eutectic melting in Fe–FeS match known results. Of the probable light elements that may alloy with Fe in the Earth's liquid outer core, Fe–FeS experiments show only modest quenching problems, but C and Si alloy experiments are highly vulnerable to quenching artifacts. The observed reactivity of FeS, Fe₃C, FeSi, and FeO(OH) with Fe in DAC makes the observed non-reactivity between Fe and FeO more significant, reducing the probability that oxygen alone is the major alloy in Earth's molten outer core.     

Elemental characteristics of lacustrine oil shale and its controlling factors of palaeo-sedimentary environment on oil yield: a case from Chang 7 oil layer of Triassic Yanchang Formation in southern Ordos Basin

As an important unconventional resource, oil shale has received widespread attention. The oil shale of the Chang 7 oil layer from Triassic Yanchang Formation in Ordos Basin represents the typical lacustrine oil shale in China. Based on analyzing trace elements and oil yield from boreholes samples, characteristics and paleo-sedimentary environments of oil shale and relationship between paleo-sedimentary environment and oil yield were studied. With favorable quality, oil yield of oil shale varies from 1.4% to 9.1%. Geochemical data indicate that the paleo-redox condition of oil shale’s reducing condition from analyses of V/Cr, V/(V + Ni), U/Th, δU, and authigenic uranium. Equivalent Boron, Sp, and Sr/Ba illustrate that paleosalinity of oil shale is dominated by fresh water. The paleoclimate of oil shale is warm and humid by calculating the chemical index of alteration and Sr/Cu. Fe/Ti and (Fe + Mn)/Ti all explain that there were hot water activities during the sedimentary period of oil shale. In terms of Zr/Rb, paleohydrodynamics of oil shale is weak. By means of Co abundance and U/Th, paleo-water-depth of oil shale is from 17.30 to 157.26 m, reflecting sedimentary environment which is mainly in semi deep–deep lake facies. Correlation analyses between oil yield and six paleoenvironmental factors show that the oil yield of oil shale is mainly controlled by paleo-redox conditions, paleoclimate, hot water activities, and depth of water. Paleosalinity and paleohydrodynamics have an inconspicuous influence on oil yield.     

Precipitation rate climatology related to different cloud types using satellite imagery over Iran

Cloud types have a substantial influence on precipitation. This paper presents a study of the monthly variations of daytime different cloud types over Iran using data collected from Moderate-resolution Imaging Spectroradiometer (MODIS) aboard Terra during 2001–2015, MODIS aboard Aqua during 2002–2015, International Satellite Cloud Climatology Project (ISCCP) H-series cloud type data during 2001–2009 and precipitation rate associated with different cloud types using Tropical Rainfall Measuring Mission (TRMM) satellite products during 2001–2009. Different cloud types were determined using MODIS cloud optical thickness and cloud top pressure data based on ISCCP algorithm. The results showed that stratocumulus and cumulus clouds have maximum occurrence frequency over marine areas especially southern seas. The maximum frequency of nimbostratus and deep convective occurrence occurred over mountainous regions particularly at the time of Aqua overpass and cirrus and cirrostratus are observed over southeast of Iran during warm months due to monsoon system. Altostratus cloud is extended in each month except January, at the time of Terra overpass while nimbostratus is seen at the time of Aqua overpass during warm months in the study area. Cumulus and altocumulus clouds have shown remarkable frequency in all months especially over marine regions during warm and fall months. The higher value of precipitation rate is related to altostratus with a rate approximately 7 mm/h at the time of Terra overpass during April. Altostratus has the maximum recorded precipitation rate except in Nov., Dec., Sep., and Jan. at the time of Terra overpass, whereas the maximum precipitation rate is linked to nimbostratus cloud activity (up to 5 mm/h) except for March, April, and Sep. at the time of Aqua overpass. Deep convective (up to 1.32 mm/h), cirrostratus (up to 1.11 mm/h), and cirrus (0.02 mm/h) are observed only in warm months. The results were compared with ISCCP cloud types so that precipitation rate classified from low to high and Spearman rank correlation was calculated. The results showed good agreement between these two cloud type data; however, there were few notable difference between them.     

Geoarchaeological evidence on a Late Bronze Age earthquake,Ohrid Basin (North Macedonia)

Geoarchaeological investigations on the northeastern shore of Lake Ohrid revealed 3.5 m thick deepwater lacustrine sediments overlying terrestrial vegetation macrofossils, worked wood and abundant potsherds dated to the Late Bronze Age (LBA). Distinct contact of deepwater sediment with the sub-aerial weathered limestone bedrock point to a sudden increase in lake level. According to radiocarbon data, catastrophic flooding occurred shortly after 1214 yr bc. Because the area is located in a highly active seismic zone, we propose that this event was caused by tectonically induced, metre-scale coseismic subsidence related to faults bordering the Ohrid alluvial plain. Moreover, this event coincides well with a dramatic switch in the habitation and settlement strategy in the region. More important, however, is the finding that the age of the proposed massive tectonic event and change in habitation lies within the interval of the proposed ‘earthquake storm’ in the eastern Mediterranean dated to 1225–1175 bc. As the Ohrid-Korça zone belongs to the same tectonic province, a relationship between the abovementioned earthquakes and the proposed event can be expected. This research therefore might provide the first direct evidence of a large-scale earthquake event linkable to the LBA collapse of Europe's first urban civilisation in the Aegean.