Biogeochemistry of nitrous oxide in groundwater in a forested ecosystem elucidated by nitrous oxide isotopomer measurements

The biological and physical controls on microbial processes that produce and consume N₂O in soils are highly complex. Isotopomer ratios of N₂O, with abundance of ¹⁴N¹⁵N¹⁶O, ¹⁵N¹⁴N¹⁶O, and ¹⁴N¹⁴N¹⁸O relative to ¹⁴N¹⁴N¹⁶O, are promising for elucidation of N₂O biogeochemistry in an intact ecosystem. Site preference, the nitrogen isotope ratio of the central nitrogen atom minus that of the terminal nitrogen atom, is useful to distinguish between N₂O via hydroxylamine oxidation and N₂O via nitrite reduction.We applied this isotopomer analysis to a groundwater system in a temperate coniferous-forested ecosystem. Results of a previous study at this location showed that the N₂O concentration in groundwater varied greatly according to groundwater chemistry, i.e. NO₃⁻, DOC, and DO, although apportionment of N₂O production to nitrification or denitrification was ambiguous. Our isotopic analysis (δ¹⁵N and δ¹⁸O) of NO₃⁻ and N₂O implies that denitrification is the dominant production process of N₂O, but definitive information is not derived from δ¹⁵N and δ¹⁸O analysis because of large variations in isotopic fractionations during production and consumption of N₂O. However, the N₂O site preference and the difference in δ¹⁵N between NO₃⁻ and N₂O indicate that nitrification contributes to total N₂O production and that most measured N₂O has been subjected to further N₂O reduction to N₂. The implications of N₂O biogeochemistry derived from isotope and isotopomer data differ entirely from those derived from conventional concentration data of DO, NO₃⁻, and N₂O. That difference underscores the need to reconsider our understanding of the N cycle in the oxic-anoxic interface.     

Linear and nonlinear vibration of non-uniform beams on two-parameter foundations using p-elements

A hierarchical finite element is presented for the geometrically nonlinear free and forced vibration of a non-uniform Timoshenko beam resting on a two-parameter foundation. Legendre orthogonal polynomials are used as enriching shape functions to avoid the shear-locking problem. With the enriching degrees of freedom, the accuracy of the computed results and the computational efficiency are greatly improved. The arc-length iterative method is used to solve the nonlinear eigenvalue equation. The computed results of linear and nonlinear vibration analyses show that the convergence of the proposed element is very fast with respect to the number of Legendre orthogonal polynomials used. Since the elastic foundation and the axial load applied at both ends of the beam affect the ratios of linear frequencies associated with the internal resonance, they influence the nonlinear vibration characteristics of the beam. The axial tensile stress of the beam in nonlinear vibration is investigated in this paper, and attention should be paid to the geometrically nonlinear vibration resulting in considerably large axial tensile stress in the beam.     

Neoproterozoic events in the Tcholliré area: Pan-African crustal growth and geodynamics in central-northern Cameroon (Adamawa and North Provinces)

The Rei Bouba Group is a sedimentary and volcanic sequence (750–?650 Ma), regarded as a remnant of a Pan-African (back-arc?) orogenic basin that separated a remobilized Paleoproterozoic crust from an accretionary area (Poli Complex: 800-650 Ma). The latter was subjected to early deformation (D1) and intruded by calc-alkalic plutons (670 Ma). Transpressive tectonics and major thrusting, with emplacement of synkinematic granite, occurred at ca 630 Ma (D2-3) and a late compression (D4), with emplacement of calc-alkalic granite, occurred at ca 570 Ma. The Tcholliré Shear Zone is regarded as part of the major boundary between a recently accreted crust and the remobilized margin of the Congo Craton.     

Isothermal annealing of partially metamict zircon: evidence for a three-stage recovery process

 Raman spectroscopy and the powder diffraction technique have been used to monitor the recovery process of two partially metamict zircons (2.6 and 4.8 × 10¹⁸ α-decays g⁻¹) from Sri Lanka during a series of isothermal annealing experiments in the temperature range from 870 to 1622 K. These experiments show for the first time that structural recovery in partially metamict zircon proceeds via three distinct recovery stages, each of which occurs within a distinct time-temperature regime. Whereas the first two stages have previously been recognized (recovery of damaged crystalline remnants and epitaxial recrystallization), the third stage has not yet been identified as a single activated process. It is suggested that anisotropic defect annealing during the first stage at low temperatures, where the structure recovers preferentially along the a(b) plane, produces a geometrical situation where large structural rearrangements are necessary to remove the remaining defects inside the crystalline material. This situation is approximately reached when the amorphous domains start to recrystallize. The reason for anisotropic annealing can be found in a different connectivity between polyhedral linkages in both directions of the zircon lattice. High apparent activation energies, in the range of 6.4 to 7.9 eV, were determined for the third recovery stage from the Raman data, which are interpreted to reflect large structural rearrangements (i.e. polyhedral tilting) associated with the final recovery of the c axis. This explains the occurrence of a distinct recrystallization stage without defect annealing. Finally, it should be mentioned that the first recovery stage is not necessarily expected to occur in less damaged zircon crystals (<∼2 × 10¹⁸ α-decays g⁻¹), since less stable defects along the basal plane might have already been self-annealed during radiation damage accumulation under ambient temperatures. Received: 6 September 2001 / Accepted: 25 February 2002     

On the Use of Computational Fluid Dynamics to Investigate Aerosol Dispersion in an Industrial Environment: A Case Study

Aerosol dispersion in the area surrounding an existing biological treatment facility is investigated using large-eddy simulation, with the objective to investigate the applicability of computational fluid dynamics to complex real-life problems. The aerosol sources consist of two large aeration ponds that slowly diffuse aerosols into the atmosphere. These sources are modelled as dilute concentrations of a non-buoyant non-reacting pollutant diffusing from two horizontal surfaces. The time frame of the aerosol release is restricted to the order of minutes, justifying a statistically steady inlet boundary condition. The numerical results are compared to wind-tunnel experiments for validation. The wind-tunnel flow characteristics resemble neutral atmospheric conditions with a Reynolds number, based on the boundary-layer thickness, of Re _δ ≈ 2 × 10⁵. The numerical inflow conditions are based upon the wind-tunnel flow field. The predicted decay of both the mean and root-mean-square concentrations are in good agreement with experimental data; at 3 m from the ground, the plume mean concentration 200 m downwind of the source is approximately 2% of the source strength. The numerical data in the near-surface layer (0–50 m from the ground) correspond particularly well with the wind-tunnel data. Tentative deposition simulations suggest that there seems to be little difference in the deposition rates of large (1.8 × 10⁻⁵ m) and small (3 × 10⁻⁶ m) particles in the near-field under the flow conditions considered.     

Provenance and accumulation rates of opaline silica,Al, Ti,Fe, Mn,Cu, Ni and Co in Pacific pelagic sediments

Accumulation rates and chemical compositions have been obtained for pelagic sediments for 73 locations in the Pacific and for 11 in the Indian Ocean. The data for the Pacific show that many elements accumulate rapidly close to the continents and slowly in the central part of the ocean. This pattern is interrupted by two major zones of relatively high accumulation rates, one along the Equator and one along the East Pacific Rise. Deposition of opaline silica is almost completely restricted to areas of known high biological productivities at the Equator and at very high latitudes. Cu and Ni show stronger tendencies than Fe and Mn to precipitate with opaline silica. The highest accumulation rates of Fe and Mn in the open Pacific occur along the East Pacific Rise, to some extent also Cu and Ni are enriched there due to volcanic processes. Al and Ti show high accumulation rates only close to the continents; these elements appear to be almost completely terrigenous.Provenance studies of minerogen fractions, using the relations between Fe, Ti, Al and Mn, show that significant quantities of basaltic matter (oceanic crust) are incorporated into the sediments only in areas of very low total sedimentation rates in the vicinity of oceanic island groups such as Polynesia and Hawaii, whereas hydrothermal processes act as a major sediment source only on the East Pacific Rise. Sediments in the north as well as in the southernmost part of the Pacific are nearly entirely terrigenous. A balance estimate of the minerogen fraction of the deep-sea sediments from the open Pacific suggests that between 75 and 95% of all sediments in the Pacific are terrigenous and that submarine weathering (and release of basaltic debris in general) and submarine exhalations each account for only a small fraction of the sediments.     

Gel- and ultramembrane filtration of aquatic humus: A comparison of the two methods

Fractionation is considered to be a necessary approach in order to obtain information about the complex composition of aquatic humus. Gel filtration has been used for this purpose for the last decade and recently ultramembrane filtration has been found useful. The two techniques are briefly described and results of a combined use of the two methods reported. The results show a poor correspondence, with regard to molecular size, between the two methods. Due to uncontrollable interaction between the gel used (Sephadex) and humus, the ultramembrane filtration technique is considered to be preferable for desalting and molecular size fractionation of aquatic humus.     

Behavior of Titan's atmosphere during a total eclipse

The edge-on presentation of Saturn's rings and satellites system has provided a rare opportunity to observe total eclipses of Titan. During its emersion from the Saturnian shadow (1980, June 28), Titan has been observed simultaneously in the visible and the infrared ranges (6000–9000 Å, 11.8 μm and 20 μm). No change has been recorded in these three spectral ranges. Our observations tend to support the thick-atmosphere model, which has been shown to be valid by Voyager a few months later.