Witnessing North Atlantic westerlies variability from ships’ logbooks (1685–2008)

A monthly index based on the persistence of the westerly winds over the English Chanel is constructed for 1685–2008 using daily data from ships’ logbooks and comprehensive marine meteorological datasets. The so-called Westerly Index (WI) provides the longest instrumental record of atmospheric circulation currently available. Anomalous WI values are associated with spatially coherent climatic signals in temperature and precipitation over large areas of Europe, which are stronger for precipitation than for temperature and in winter and summer than in transitional seasons. Overall, the WI series accord with the known European climatic history, and reveal that the frequency of the westerlies in the eastern Atlantic during the twentieth century and the Late Maunder Minimum was not exceptional in the context of the last three centuries. It is shown that the WI provides additional and complementary information to the North Atlantic Oscillation (NAO) indices. The analysis of WI series during the industrial era indicates an overall good agreement with the winter and high-summer NAO, with the exception of several multidecadal periods of weakened correlation. These decoupled periods between the frequency and the intensity of the zonal flow are interpreted on the basis of several sources of non-stationarity affecting the centres of the variability of the North Atlantic and their teleconnections. Comparisons with NAO reconstructions and long instrumental indices extending back to the seventeenth century suggest that similar situations have occurred in the past, which call for caution when reconstructing the past atmospheric circulation from climatic proxies. The robustness and extension of its climatic signal, the length of the series and its instrumental nature make the WI an excellent benchmark for proxy calibration in Europe and Greenland.     

UV-tolerance and instantaneous physiological stress responses of two Antarctic amphipod species Gondogeneia antarctica and Djerboa furcipes during exposure to UV radiation

We investigated the shielding against solar ultraviolet radiation and inducible damage, as well as the short-term response of whole animal metabolic rate in two Antarctic shallow water amphipod species. Light absorbance by the carapace of Gondogeneia antarctica and Djerboa furcipes was higher in the UVR (UVB+UVA) range (42.1% and 54.5% on average respectively) compared to the PAR (photosynthetically active radiation) range (38.1% and 50.1% respectively) of the solar spectrum. Bands of higher absorbance correlated with maximal absorbance ranges of sunscreening compounds indicating mycosporine-like amino acids (MAAs) and carotenoids to be innate compounds of the exoskeleton of these species. Though the antioxidant enzyme catalase was photoinhibited, protein damage products did not accumulate under experimental exposure to a daily dose of 6.84 kJ m(-2) d(-1) UVB, 66.24 kJ m(-2) d(-1) UVA and 103.14 kJ m(-2) d(-1) PAR. Animal oxygen consumption during UV-exposure was measured as an indicator of immediate behavioural and physiological stress response. UVB as well as UVA induced a response with altered and highly variable respiratory intensity. Our findings indicate that sub-lethal UVR exposure causes increased oxygen consumption in polar amphipods due to radiation avoidance, shelter seeking behaviour, and presumably also from cellular repair processes.     

Stability of C60 and C70 fullerenes toward corpuscular and γ radiation

The stability of C₆₀ and C₇₀ fullerenes in the interstellar medium deposited on dust surface or embedded in meteorites and comets has been simulated with γ irradiation and with He⁺ ion bombardment. It is shown by vibrational spectroscopy that a γ radiation dose of 2.6 MGy (1 Gy = 1 joule absorbed energy per kilogram) causes partial oligomerization of both C₆₀ and C₇₀ fullerenes. Oligomers are made by fullerene cages chemically connected each other which can yield back free fullerenes by a thermal treatment. The amount of irreversibly polymerized fullerenes caused by 2.6 MGy as deduced as the toluene insoluble fraction has been determined as 1.7 and 15 per cent by weight, respectively, for C₆₀ and C₇₀ fullerene. The radiation dose generated by radionuclides decay and expected to be delivered to fullerenes buried at a depth of more than 20 m in comets and meteorites is about 3 MGy per 10⁹ yr. Since fullerenes are by far resistant to such radiation dose they can survive for at least some billion years inside comets and meteorites and in fact have been detected inside certain carbonaceous chondrites. On the other hand, the direct exposure of fullerenes to cosmic rays for instance when they are adsorbed or deposited on the surface of carbon dust corresponds to the delivery of a radiation dose comprised between 30 and 65 MGy per 10⁹ yr. Experimental bombardment of both C₆₀ and C₇₀ fullerenes for instance with He⁺ ions has shown that the complete amorphization occurs at about 250 MGy. Thus in ∼4 Gyr exposure to cosmic rays it is expected a complete amorphization.     

B‐bar based algorithm applied to meshfree numerical schemes to solve unconfined seepage problems through porous media

The object of this work is to establish a meshfree framework for solving coupled, steady and transient problems for unconfined seepage through porous media. The Biot's equations are formulated in displacements (or u − w) assuming an elastic solid skeleton. The free surface location and its evolution in time are obtained by interpolation of pore water pressures throughout the domain. Shape functions based on the principle of local maximum entropy are chosen for the meshfree approximation schemes. In order to avoid the locking involved in the fluid phase of the porous media, a B‐bar based algorithm is devised to compute the average volumetric strain in a patch composed of various integration points. The efficiency of such an implementation for one phase problems is shown through the Benchmark problem, Cook's membrane loaded by a distributive shear load. The proposed methodology is firstly applied to various classical examples in unconfined steady seepage problems through earth dams, then to the dynamic consolidation of a soil column. The results obtained for both problems are quite satisfactory and demonstrate the feasibility of the proposed method in solving coupled problems in porous media. Copyright © 2015 John Wiley & Sons, Ltd.     

Generation of overtides and compound tides in Amazon estuary

Tidal propagation in estuaries is affected by friction and fresh water discharge, besides changes in the depth and morphology of the channel. Main distortions imply variations in the mean water level and asymmetry. Tidal asymmetry can be important as a mechanism for sediment accumulation and turbidity maximum formation in estuaries, while mean water level changes can affect navigation depths. Data from several gauges stations from the Amazon estuary and the adjacent coast were analyzed and a 2DH hydrodynamic model was configured in a domain covering the continental shelf up to the last section of the river where the tidal signature is observed. Based on data, theoretical and numerical results, the various influences in the generation of estuarine harmonics are presented, including that of fresh water discharge. It is shown that the main overtide, M₄, derived from the most important astronomic component in the Amazon estuary, M₂, is responsible for the tidal wave asymmetry. This harmonic has its maximum amplitude at the mouth, where minimum depths are found, and then decreases while tide propagates inside the estuary. Also, the numerical results show that the discharge does not affect water level asymmetry; however, the Amazon river discharge plays an important role in the behavior of the horizontal tide. The main compound tide in Amazon estuary, Msf, generated from the combination of the M₂ and S₂, can be strong enough to provoke neap low waters lower than spring ones. The results show this component increasing while going upstream in the estuary, reaching a maximum and then slightly decaying.     

Conodont colour alteration indices (CAI) of Upper Ordovician limestones from the Iberian Peninsula

Conodont colour alteration index (CAI) data in Upper Ordovician rocks from several areas of the Variscan domain in the Iberian Peninsula indicate conditions ranging from diagenesis to low-grade metamorphism. In most of the areas, where studies using other indicators, such as illite crystallinity (IC) or where vitrinite reflectance are lacking, the CAI method has permitted a preliminary estimation of the metamorphic grade. In the Almadén syncline (Central-Iberian Zone), where IC studies are available, the thermal conditions inferred from CAI data agree with those obtained by the IC method. In the Puertollano–Almuradiel syncline, the thermal interval obtained primarily from fluid inclusions (270–370°C) overlaps considerably with that obtained from CAI data (180–340°C). In general, cleavage in rocks is present in anchizonal or epizonal conditions, whereas in diagenetic conditions with CAI 2.5, cleavage is scarce. The conodont texture changes with increasing metamorphism, and apatite recrystallisation appears in general with CAI 5. Variation of CAI values within a single sample and/or within short stratigraphic distances observed at several localities is due to hydrothermal activity.     

Seismic hazard impact of the Lower Tagus Valley Fault Zone (SW Iberia)

The seismic hazard of SW Iberia is composed of two contributions: offshore, large to very large events on the plate boundary between Africa and Eurasia such as the Lisbon earthquake of 1755 or the Gorringe Bank earthquake of 1969; and onshore, moderate to strong intraplate earthquakes on inherited crustal fractures. One of these zones of crustal weakness is the Lower Tagus Valley (LTV) fault zone, which displays the highest level of seismic hazard in Western Iberia. In this paper we review the active tectonics and seismicity of the LTV, integrating previous geophysical data with recent results of paleoseismological investigations, and discuss its impact on the seismic hazard of SW Iberia. We conclude that the seismic zonation for hazard assessment currently in force in the building code is biased towards the scenario of distant offshore rupture, and does not take adequately into account the LTV seismic source.     

Effect of isolation temperature on the characteristics of extracellular proteases produced by Antarctic bacteria

Protease-producing psychrotolerant bacteria were isolated from Antarctic biotopes on casein agar plates using different incubation temperatures. Most of the isolates were non-spore-forming Gram-negative motile rods with catalase activity, 30% were pigmented and none of them were glucose fermenters. All the strains were grown in liquid cultures at 20°C and protease secretion was tested using the azocasein method. Despite their capacity for production of a clear zone of hydrolysis in agar plates, some strains did not produce detectable levels of proteolytic activity in liquid cultures. The lowest apparent optimum temperature for protease activity found in culture supernatants was 40°C. Almost all the strains showed activation energy values about 10-20 kJ-mol⁻¹ lower than that observed for a mesophilic Subtilisin. Most of the proteases showed optimal activity at neutral or alkaline pH values and developed a multiple-band profile on gelatine-SDS-PAGE. It was observed that the lower the strain isolation temperature was, the more stongly cold-adapted–in terms of optimal temperature and activation energy–were the proteases produced by them. This dependence of the characteristics of the proteases on the isolation temperature is an important factor to take into account in the design of screening programmes directed towards the isolation of psychrotolerant bacteria able to produce proteases strongly or weakly adapted to work in the cold. The Antarctic area explored proved to be a promising source of proteolytic bacteria with potential use in industrial processes to be carried out at low or moderate temperatures.     

Stochastic evaluation of the impact of sewer inlets’ hydraulic capacity on urban pluvial flooding

Sewer inlet structures are vital components of urban drainage systems and their operational conditions can largely affect the overall performance of the system. However, their hydraulic behaviour and the way in which it is affected by clogging is often overlooked in urban drainage models, thus leading to misrepresentation of system performance and, in particular, of flooding occurrence. In the present paper, a novel methodology is proposed to stochastically model stormwater urban drainage systems, taking the impact of sewer inlet operational conditions (e.g. clogging due to debris accumulation) on urban pluvial flooding into account. The proposed methodology comprises three main steps: (i) identification of sewer inlets most prone to clogging based upon a spatial analysis of their proximity to trees and evaluation of sewer inlet locations; (ii) Monte Carlo simulation of the capacity of inlets prone to clogging and subsequent simulation of flooding for each sewer inlet capacity scenario, and (iii) delineation of stochastic flood hazard maps. The proposed methodology was demonstrated using as case study design storms as well as two real storm events observed in the city of Coimbra (Portugal), which reportedly led to flooding in different areas of the catchment. The results show that sewer inlet capacity can indeed have a large impact on the occurrence of urban pluvial flooding and that it is essential to account for variations in sewer inlet capacity in urban drainage models. Overall, the stochastic methodology proposed in this study constitutes a useful tool for dealing with uncertainties in sewer inlet operational conditions and, as compared to more traditional deterministic approaches, it allows a more comprehensive assessment of urban pluvial flood hazard, which in turn enables better-informed flood risk assessment and management decisions.     

Spatial and temporal distribution of cadmium and copper in water and zooplankton in the Bahía Blanca estuary,Argentina

Cadmium and copper in the dissolved and particulate phase and in zooplankton were determined in the Bahía Blanca estuary during six surveys from March to December 2005. Temperature, pH, salinity, dissolved oxygen, suspended particulate matter, particulate organic matter and chlorophyll-a were also considered. Dissolved Cd was below the detection limit (0.2 μg L⁻¹) for almost the entire study period whereas Cu concentrations (0.5–2.4 μg L⁻¹) indicated a continuous dissolved Cu input. Particulate Cd concentrations ranged from below the detection limit (<0.01) to 28.6 μg g⁻¹ d.w. while particulate Cu ranged from below the detection limit (<0.04) to 53.5 μg g⁻¹ d.w. Cd in mesozooplankton ranged from below the detection limit (<0.01) to 37.4 μg g⁻¹ d.w. Some of the Cd levels were higher than those reported for other aquatic ecosystems. Cu in the mesozooplankton ranged from 1.3 to 89.3 μg g⁻¹ d.w., values which were within the reported values or higher than other studies. The log of the partition coefficients (log (K_d)) of Cd was 0.04, while log (K_d) for Cu ranged from −0.39 to 2.79. These values were lower than both those calculated for other estuaries and the typical coefficients for marine environments. The log of the bioconcentration factor (log BCF) of Cd was 1.78, indicating that Cd concentration was higher in the zooplankton than in the dissolved phase. Log BCF of Cu ranged from 1.15 to 3. The logs of the biomagnification factors (log BMF) of Cd were low, with a range between −3.45 and 2.21 and those for Cu ranged from −0.1 to 3.35. Positive values indicate biomagnification while negative values indicate biodiminution. In general, no significant dissolved Cd concentration appeared to be present in the Bahía Blanca estuary and Cu values did not indicate a critical environmental status. The particulate phase seemed to be the major carrier for Cd and Cu and TPCu values were within the normal values for an anthropogenically stressed estuary but not for a strongly polluted system. This fraction was the most important metal source for the mesozooplankton. Moreover, the highest metal concentrations were in the mesozooplankton since most of the bioconcentration and biomagnification factors were positive, especially for Cu.