Anisotropy of magnetic susceptibility parameters: Guidelines for their rational selection

Twenty-eight parameters used to characterize measurements of the anisotropy of magnetic susceptibility are compared theoretically in this work by introducing the concept of the field of susceptibility tensors, which allows the representation of parameters as families of lines in a plane. It is demonstrated that the foliation and lineation parameters are but a special case of the shape parameters, implying that the resolution of these two rock fabric elements using AMS measurements alone is more an artifact of the numerical range of definition of some parameters than a quantification of two physically independent features. Also, it is shown that parameters presumably of the same type do not necessarily yield equivalent interpretation of results in a qualitative sense, and therefore, caution should be strongly exercised when parameters are to be selected. Paramters quantifying the degree of anisotropy are, in general, equivalent to each other because of the very small departure observed in natural rocks from the isotropic case. However, a final consideration of the possible ability to differentiate rock types and a convenient range of values allowing expression of the degree of anisotropy in a well-defined percentage are pointed out as the main factors to be considered before selecting one parameter within this class.     

Seismic activity related to the 1991 eruption of Colima Volcano,Mexico

Ten years after the last effusive eruption and at least 15 years of seismic quiescence, volcanic seismic activity started at Colima volcano on 14 February 1991, with a seismic crisis which reached counts of more than 100 per day and showed a diversity of earthquake types. Four other distinct seismic crises followed, before a mild effusive eruption in April 1991. The second crisis preceded the extrusion of an andesitic scoriaceous lava lobe, first reported on 1 March; during this crisis an interesting temporary concentration of seismic foci below the crater was observed shortly before the extrusion was detected. The third crisis was constituted by shallow seismicity, featuring possible mild degassing explosion-induced activity in the form of hiccups (episodes of simple wavelets that repeat with diminishing amplitude), and accompanied by increased fumarolic activity. The growth of the new lava dome was accompanied by changing seismicity. On 16 April during the fifth crisis which consisted of some relatively large, shallow, volcanic earthquakes and numerous avalanches of older dome material, part of the newly extruded dome, which had grown towards the edge of the old dome, collapsed, producing the largest avalanches and ash flows. Afterwards, block lava began to flow slowly along the SW flank of the volcano, generating frequent small incandescent avalanches. The seismicity associated with the stages of this eruptive activity shows some interesting features: most earthquake foci were located north of the summit, some of them relatively deep (7–11 km below the summit level), underneath the saddle between the Colima and the older Nevado volcanoes. An apparently seismic quiet region appears between 4 and 7 km below the summit level. In June, harmonic tremors were detected for the first time, but no changes in the eruptive activity could be correlated with them. After June, the seismicity decreasing trend was established, and the effusive activity stopped on September 1991.     

Rock magnetic evidence of inflation of a flood basalt lava flow

The anisotropy of magnetic susceptibility (AMS) of lava flows is an innovative method which has been proved to be directly related to the shear history of lava. One of the advantages of this method is that it can be used in the absence of other morphological features commonly employed to study the mechanism of emplacement of lava flows. This feature of the AMS method makes it very attractive to gain insight into the mechanism of emplacement of massive, relatively featureless, long lava flows such as those forming flood basalt provinces. In this work, we report the results of the measurement of AMS as a function of vertical position within the Birkett lava flow, one of the Columbia River Basalt Group flows. The observed variation of AMS allows us to identify at least 16 discrete events of lava injection and to estimate the thickness of individual injection events. The AMS-estimated thickness of each injection event (in the range of 0.5-4.0 m) coincides with the range inferred for injected lava pulses in modern Hawaiian lava flows. Thus, the evidence provided by the AMS method supports the notion that at least some flood basalt lava flows were emplaced by the same mechanism as many present-day inflated pahoehoe flows. Regarding the orientation of the principal susceptibilities, in the central part of the flow they define a preferred orientation along an E-W trend, whereas in the outer parts of the flow they have a NNE-SSW trend. This difference in the orientation of the principal susceptibilities is interpreted as the result of a change of flow direction of the lava as emplacement progressed. Electronic supplementary material to this paper can be obtained by using the Springer LINK server located at http://dx.doi.org/10.1007/s00445-002-0203-8.     

Stable Eocene Magnetization Carried by Magnetite and Iron Sulphides in Marine Marls (Pamplona-Arguis Formation,Southern Pyrenees,Northern Spain)

In order to establish the magnetic carriers and assess the reliability of previous paleomagnetic results obtained for Eocene marine marls from the south Pyrenean basin, we carried out a combined paleo- and rock-magnetic study of the Pamplona-Arguis Formation, which crops out in the western sector of the southern Pyrenees (N Spain). The unblocking temperatures suggest that the characteristic remanent magnetization (ChRM) is carried by magnetite and iron sulphides. The ChRM has both normal and reversed polarities regardless of whether it resides in magnetite or iron sulphides, and represents a primary Eocene magnetization acquired before folding. Rock magnetic results confirm the presence of magnetite and smaller amounts of magnetic iron sulphides, most likely pyrrhotite, in all the studied samples. Framboidal pyrite is ubiquitous in the marls and suggests that iron sulphides formed during early diagenesis under sulphate-reducing conditions. ChRM directions carried by magnetic iron sulphides are consistent with those recorded by magnetite. These observations suggest that magnetic iron sulphides carry a chemical remanent magnetization that coexists with a remanence residing in detrital magnetite. We suggest that the south Pyrenean Eocene marls are suitable for magnetostratigraphic and tectonic purposes but not for studies of polarity transitions, secular variations and geomagnetic excursions, because it is difficult to test for short time differences in remanence lock-in time for the two minerals. The presence of iron sulphide minerals contributing to the primary magnetization in Eocene marine marls reinforces the idea that these minerals can persist over long periods of time in the geological record.     

Assessment of evaporation and water fluxes in a column of dry saline soil subject to different water table levels

Dry saline soils are common in the arid and hyper‐arid basins located in the Chilean Altiplano, where evaporation from shallow groundwater is typically the major component of the water balance. Thus, a good understanding of evaporation processes is necessary for improving water resource planning and management in these regions. In this study, we conducted laboratory experiments with a natural saline soil column to estimate evaporation rates and assess the liquid and water vapor fluxes under different water table levels. Water content, electrical conductivity and temperature at different depths were utilized to assess the liquid and water vapor fluxes in the soil column. We observed movement of water that dissolves salts from the soil and transports them to areas in the column where they accumulate. Isothermal liquid flux was predominant, while thermal and isothermal liquid and thermal water vapor fluxes were negligible, except for deep water table levels where isothermal and thermal water vapor fluxes had similar magnitude but opposite directions. Differences observed in total fluxes for all water table levels were due to different upward and downward fluxes, which depend on changes in water content and temperature within the soil profile. Both the vapor flux magnitude and direction were found to be very sensitive to the choice of empirical parameters used in flux quantification, such as tortuosity and the enhancement factor for local temperature gradients in the air phase within the column. Copyright © 2013 John Wiley & Sons, Ltd.     

Spatial distribution and ecotoxicity of petroleum hydrocarbons in sediments from the Galicia continental shelf (NW Spain) after the Prestige oil spill

The distribution of aliphatic and aromatic hydrocarbons was determined in surface sediments collected at 36 stations along the Galicia continental shelf (NW Spain), following the Prestige oil spill. Sampling was performed in December 2002, just after the accident, and in February and September 2003. Concentrations of PAHs (summation operator 13 parent components) were in the range of 0.9-422 microg/kgdw, the highest values being close to coastal urban areas (e.g. Pontevedra and A Coru?a), whereas in the stations of the area most heavily impacted by the spill (off Costa da Morte) concentrations were in the range of 14.8-89.6 microg/kgdw, with a certain predominance of alkylated compounds, which may suggest a mixture of petrogenic and pyrolytic sources. The detailed study of petrogenic molecular markers (e.g. steranes and triterpanes) showed the occurrence of an old (weathered) petrogenic chronic pollution in the shelf sediments but not of the Prestige oil, with the possible exception of few stations in the area of Costa da Morte. This was attributed to the heavy nature of the spilled oil that was barely dispersed in the water column and mainly stranded on the coast or sedimented in the form of oil patches. The addition of increasing amounts of fuel oil to a representative sediment sample showed that the molecular indices were indicative of the presence of the Prestige oil when the amount was above 1g/kg of sediment. The toxicity of selected samples (showing the higher PAH concentrations) was tested using the bivalve embryogenesis bioassay. Embryogenesis success reached high values in all cases (80-88%, with 86% in the control), indicating a lack of toxicity in the sediments and supporting the conclusion that the patchiness of the fuel eventually reaching the seafloor reduced its impact on the benthic communities of the Galician shelf.     

Evaluating infiltration losses in a Mediterranean wetland: Las Tablas de Daimiel National Park,Spain

Las Tablas de Daimiel National Park is a series of wetlands which naturally originated from groundwater discharges from the Mancha Occidental aquifer, Spain. Despite the relatively large size of this aquifer, 30 years of intensive groundwater pumping have significantly depleted the water table. As a result, wetlands only remain functional due to artificial inflows. Infiltration loss is therefore a key parameter to evaluate how much water is needed to maintain ecosystem functionality. Although yearly infiltration estimates existed prior to this work, these did not take into account key parameters such as the temporal evolution of the flooded area. This paper presents a more concrete estimate of the average infiltration losses. Infiltration is calculated as the closure term of daily water balances during a period of time where all other elements were known to an acceptable accuracy. A validation mechanism is provided to check the potential utility of the calculated infiltration in wetland management practices. Copyright © 2008 John Wiley & Sons, Ltd.     

Multifractal analysis as a tool for validating a rainfall model

A multifractal analysis was carried out in order to validate the simulation of hourly rainfall records of a local climate model for the Iberian Peninsula. Observed and simulated hourly rainfall data from four locations in Andalusia (southern Spain) were used to carry out the study. In order to detect the influence of the length of the data series on the results, two different sizes were used for the real data: 4 years, and 20 years. The results show that algebraic tails are required to fit the probability distribution of extreme rain event sizes, and rain and dry event durations for both kinds of rainfall data. Similar results are found for the extreme rain event sizes and dry event durations fits when the real and synthetic data are considered. Nevertheless, some differences appear in the cases of rain event durations. The detection of the presence of a first‐order multifractal phase transition associated with a critical moment in the empirical moment scaling exponent function and the results of the extreme rain event sizes fits, reveal that real rainfall is a self‐organized criticality (SOC) process. That behaviour is less evident in the simulated rainfall series. The same ‘synoptic maximum’ value was found for each place with both types of rainfall data. A time clustering analysis was carried out applying the count‐based periodogram and the Fano factor methods. Some periodicities have been detected in the periodograms, especially for the longest real rainfall data series. Copyright © 2007 John Wiley & Sons, Ltd.     

Metallic Mineral Resources in the Twenty-First Century. I. Historical Extraction Trends and Expected Demand

Industrial, technological, and economic developments depend on the availability of metallic raw materials. As a greater fraction of the Earth’s population has become part of developed economies and as developed societies have become more affluent, the demand on metallic mineral resources has increased. Yet metallic minerals are non-renewable natural resources, the supply of which, even if unknown and potentially large, is finite. An analysis of historical extraction trends for eighteen metals, going back to the year 1900, demonstrates that demand of metallic raw materials has increased as a result of both increase in world population and increase in per-capita consumption. These eighteen metals can be arranged into four distinct groups, for each of which it is possible to identify a consistent pattern of per-capita demand as a function of time. These patterns can, in turn, be explained in terms of the industrial and technological applications, and in some cases conventional uses as well, of the metals in each group. Under the assumption that these patterns will continue into the future, and that world population will grow by no more than about 50% by the year 2100, one can estimate the amount of metallic raw materials that will be required to sustain the world’s economy throughout the twenty-first century. From the present until the year 2100, the world can be expected to require about one order of magnitude more metal than the total amount of metal that fueled technological and economic growth between the age of steam and the present day. For most of the metals considered here, this corresponds to 5–10 times the amount of metal contained in proven ore reserves. The two chief driving factors of this expected demand are growth in per-capita consumption and present-day absolute population numbers. World population is already so large that additional population growth makes only a small contribution to the expected future demand of metallic raw materials. It is not known whether or not the amount of metal required to sustain the world’s economy throughout this century exists in exploitable mineral resources. In the accompanying paper, I show that it is nevertheless possible to make statistical inferences about the size distribution of the mineral deposits that will need to be discovered and developed in order to satisfy the expected demand. Those results neither prove nor disprove that the needed resources exist but can be used to improve our understanding of the challenges facing future supply of metallic raw materials.