Use of site amplification and anelastic attenuation for the determination of source parameters of the Sikkim earthquake of September 18, 2011, using far-field strong-motion data

An earthquake of magnitude 6.9 (M _w) occurred in the Sikkim region of India on September 18, 2011. This earthquake is recorded on strong-motion network in Uttarakhand Himalaya located about 900 km away from the epicenter of this earthquake. In this paper acceleration record from six far-field stations has been used to compute the source parameters of this earthquake. The acceleration spectra of ground motion at these far-field stations are strongly affected by both local site effects and near-site anelastic attenuation. In the present work the spectrum of S-phase recorded at these far-field stations has been corrected for anelastic attenuation at both source and site and the site amplification terms. Site amplifications at different stations and near-site shear wave attenuation factor have been computed by the technique of inversion of acceleration spectra given by Joshi et al. (Pure Appl Geophys 169:1821–1845, 2012a). For estimation of site amplification and shear wave quality factor [Q _β (f)] at the recording sites, ten local events recorded at various stations between July 2011 and December 2011 have been used. The obtained source spectrum from acceleration records is compared with the theoretical source spectrum defined by Brune (J Geophys Res 76:5002, 1970) at each station for both horizontal components of the records. Iterative forward modeling of theoretical source spectrum gives the average estimate of seismic moment (M _o), source radius (r _o) and stress drop (Δσ) as (3.2 ± 0.8) × 10²⁶ dyne cm, 13.3 ± 0.8 km and 59.2 ± 8.8 bars, respectively, for the Sikkim earthquake of September 18, 2011.     

Ionospheric disturbances with the time of occurrence, magnitude and location of the earthquake (M6.5) near the Indian subcontinent

The present study purports the analysis of total electron content (TEC, which is one of the major ionosphere anomalies during the earthquake), sea surface temperature (SST) and outgoing long-wave radiation (OLR) during the earthquake event recorded on 10 March 2013 (M = 6.5). Global assimilative ionosphere modelled output TEC values have been used for this present study; the clear signature of TEC during the recorded earthquake has been noticed (i.e. increase in TEC 60–70 TECU during the event). The correlation between the magnitude and location of earthquake with TEC is around 0.9, and the least correlation between SST and OLR is due to concerned atmospheric effects; we tried to study the variations of SST and OLR prior during and after the event from Kalpana satellite image products archived by IMD.     

Flood hazard assessment with multiparameter approach derived from coupled 1D and 2D hydrodynamic flow model

Hydrodynamic flow modeling is carried out using a coupled 1D and 2D hydrodynamic flow model in northern India where an industrial plant is proposed. Two flooding scenarios, one considering the flooding source at regional/catchment level and another considering all flooding sources at local level have been simulated. For simulating flooding scenario due to flooding of the upstream catchment, the probable maximum flood (PMF) in the main river is routed and its flooding impact at the plant site is studied, while at the local level flooding, in addition to PMF in the main river, the probable maximum precipitation at the plant site and breaches in the canals near the plant site have been considered. The flood extent, depth, level, duration and maximum flow velocity have been computed. Three parameters namely the flood depth, cross product of flood depth and velocity and flood duration have been used for assessing the flood hazard, and a flood hazard classification scheme has been proposed. Flood hazard assessment for flooding due to upstream catchment and study on local scale facilitates determination of plinth level for the plant site and helps in identifying the flood protection measures.     

Earthquake damage identification: a case study using soft classification approach

The October 8, 2005, Kashmir earthquake (M _w 7.6) affected the rough mountainous regions of India and Pakistan with poor accessibility, and thus, no proper comprehensive ground survey was possible. However, due to the ability of remote sensing technology to acquire spectral measurements of damaged areas at various spatial and temporal scales, extraction of damaged areas can be carried out quickly and with great reliability. The fuzzy-based classifiers [Possibilistic c-Means (PCM), noise cluster (NC), and NC with entropy (NCE)] were applied to identify 2005 Kashmir earthquake, induced landslides, as well as built-up damage (BD) areas, as soft computing approaches using supervised classification. Results indicate that for the identification of landslides and BD areas, NCE classifier generated the best outputs, while for the identification of built-up undamaged areas, NC classifier generated the best output. Further, it was found that the proposed Class Based Sensor Independent (CBSI) technique can improve spectral information of specific class for better identification.     

Modeling the behaviour of alluvial and blasted quarried rockfill materials

Two types of modeled rockfill materials were collected from Renuka dam site, Himachal Pradesh, India and Salma dam site, Afghanistan. The rockfill material collected from Renuka dam site is rounded to sub-rounded in shape and the rockfill material collected from Salma dam site is angular to sub-angular in shape. The prototype gradation rockfill material consists maximum particle size larger than 1,000 mm. Therefore, for carrying out laboratory testing and modeling the bahaviour, the prototype rockfill material is scaled down to the maximum particle size (d_max) of 25, 50 and 80 mm for both projects material using parallel gradation technique. Triaxial compression and Index properties tests were conducted on both project rockfill materials and are presented. From the triaxial behaviour, it is observed that the stress–strain behaviour is non-linear, inelastic and stress dependent for both the materials. The material compresses during the initial shearing and shows dilation effect with further shearing. It is observed that the ?-value for alluvial rockfill material increases with increase in d_max and reverse trend is observed for blasted quarried rockfill material which shows the importance of the type of material. The stress–strain-volume change behaviour of both projects modeled rockfill material was predicted by using hierarchical single surface (HISS) model based on elasto plasticity and compared with the laboratory test results. From the comparison, it is observed that both results match closely. It is, therefore, suggested that the behaviour of both types of rockfill materials can be characterized successfully using HISS model.     

On anomalously high sub-surface dissolved oxygen in the Indian sector of the Southern Ocean

The Southern Ocean (SO) plays a critical role in global ocean productivity and carbon cycling. Bio-Argo floats deployed in the Indian sector of the Southern Ocean provides new insights into the biogeochemical processes. Here we report significantly higher dissolved oxygen(DO) (~?310 μmol/kg) in summer of 2014–2015 for one float (F1) and winter of 2014 in other float (F2) at sub-surface layer in the subantarctic region of the SO. The summer DO peak in F1 was 10% higher than those during the summer of succeeding year, while the winter DO peak in F2 was 20% higher than those during the winter of succeeding year. Temperature and dynamic height structure show that cyclonic eddies play an important role in the observed increase in the dissolved oxygen: the high DO is a manifestation of the co-occurrence of a cold core eddy which transported the cold oxygen rich water from deep to the surface during winter, while, during summer, the high chlorophyll below the mixed layer depth (MLD) also contributed to the elevated DO. Low apparent oxygen utilisation suggests that the observed high oxygen concentration was due to high production rates over the consumption.

     

Bootstrap aggregating approach to short-term load forecasting using meteorological parameters for demand side management in the North-Eastern Region of India

Theoretical and Applied Climatology - Electricity is an essential commodity that must be generated in response to demand. Hydroelectric power plants, fossil fuels, nuclear energy, and wind energy...     

The radius spectrum of solid grains settling in gaseous giant protoplanets

Growth of grains having different initial sizes (10^?3 cm?≤?r ₀?≤?1 cm) has been investigated by coagulation processes inside gas giant protoplanets, formed by disk instability, in the mass range 0.3 to 10 Jovian masses. In doing so, we have determined distribution of thermodynamic variables inside the protoplanets and using the results we have determined growth of the grains having assumed initial sizes. Regarding the transference of heat inside the protoplanets, we have considered the possible two cases of interest, namely convection and conduction-radiation. The results of our calculation show that growth of the grains depends on protoplanetary masses and on initial states of the protoplanets and eventually all the grains having assumed different initial sizes acquire almost the same distribution in the central regions of respective protoplanets in the respective cases.     

Arsenic mobilization in alluvial soils of Punjab, North–West India under flood irrigation practices

A laboratory investigation was carried out to examine the mechanism of arsenic (As) mobilization under flooded conditions (24 and 240 h) in 18 alluvial soils of Punjab, North–West India. Total dissolved As increased from a range of 3–16 μg L^?1 (mean 9 μg L^?1) to a range of 33–1,761 μg L^?1 (mean 392 μg L^?1) with the increase in flooding period from 24 to 240 h. The amount of As mobilization varied depending upon redox potential (pe) created by flooding conditions. After 24 h of flooded conditions, pe of soil water suspension ranged from ?1.75 to 0.77 (mean ?0.24). Increasing the flooding period to 240 h, pe of soil water suspension decreased in the range of ?4.49 to ?2.74 (mean ?3.29). Pourbaix diagram identified arsenate (HAsO₄ ^2?) as predominant species in most of the alluvial soil–water suspensions under oxidized conditions, after 24 h of equilibration period, which ultimately transformed to arsenite (H₃AsO₃ ⁰) after 240 h of anaerobic condition due to more reduced status. The solid phase identified was orpiment (As₂S₃). Identification of iron and manganese species in alluvial soil water suspension by Pourbaix diagram indicated decline in both soluble Fe²⁺ and SO₄ ^2? concentration due to the formation of iron sulfide mineral phase after 240 h under anaerobic conditions. In these soils, decline in soluble Fe was also due to the precipitation of vivianite [Fe₃(PO₄)₂·8H₂O]. Elevated arsenic content and low pe value were measured in aquifers located in paddy growing fields comparative to aquifers of other sites. Large degree of variability in As concentrations was recorded in aquifers located at same sites. Thus, it is better to analyze each aquifer for their As content rather than to depends on the prediction on As content of neighbouring wells. The present investigation elucidates that flood irrigation practices in Punjab for growing paddy crop could induce the geochemical conditions favorable to mobilize arsenic from surface soils which could eventually elevate its content in the underlying shallow aquifers. Water abstracted from these aquifers by hand pumps or tube wells for drinking purposes could create hazards for local population due to loading with arsenic concentration above the safe limits. Thus, to avoid further contamination of shallow aquifers with arsenic, it is advisable to shift the flooded rice cultivation to other upland crops having lesser water requirement.