Comparison of the Bright Band Characteristics Measured by Micro Rain Radar （MRR） at a Mountain and a Coastal Site in South Korea

Data from a long term measurement of Micro Rain Radar (MRR) at a mountain site (Daegwallyeong,DG, one year period of 2005) and a coastal site (Haenam, HN, three years 2004–2006) in South Korea were analyzed to compare the MRR measured bright band characteristics of stratiform precipitation at the two sites. On average, the bright band was somewhat thicker and the sharpness (average gradient of reflectivity above and below the reflectivity peak) was slightly weaker at DG, compared to those values at HN. The ...     

Local Meteorological and Synoptic Characteristics of Fogs Formed over Incheon International Airport in the West Coast of Korea

Fogs observed over Incheon international airport (IIA) in the west coast of Korea from January 2002 to August 2006 are classified into categories of coastal fog, cold sea fog, and warm sea fog based on the areal extent of the fogs and the difference between the air temperature (T) and the SST, i.e., cold sea fog if TSST = T-SST>0^oC and warm sea fog if TSST <0^oC. The numbers of coastal, cold, and warm sea fog cases are 64, 26, and 9. Coastal fogs form most frequently in winter, while cold sea fogs occur mostly in summer and warm sea fogs are observed from January to May but not in November and December. On average the air gets colder by 1.6^oC during the three hours leading up to the coastal fog formation, and an additional cooling of 1.1^oC occurs during the fog. The change in the dew point temperature (T_d) is minimal except during the fog (0.6^oC). Decreases in T for the cold and warm sea fogs are relatively smaller. The average T_d is higher than SST during the cold sea fog periods but this T_d is more than 4^oC higher than that for the corresponding non-fog days, suggesting that cold sea fogs be formed by the cooling of already humid air (i.e., T_d>SST). Increases of T_d are significant during the warm sea fog periods (1.4^oC), implying that efficient moisture supply is essential to warm sea fog formation. Four major synoptic patterns are identified in association with the observed fogs. The most frequent is a north Pacific high that accounts for 38% of cases. Surface or upper inversions are present in 77%, 69%, and 81% of the fog periods for coastal, cold, and warm sea fogs, respectively.     

Pyrosequencing reveals specific associations of bacterial clades Roseobacter and Flavobacterium with the harmful dinoflagellate Cochlodinium polykrikoides growing in culture

Harmful algal blooms of the dinoflagellate Cochlodinium polykrikoides are of worldwide environmental concern. Previous field studies have demonstrated the association of such algal blooms with free‐living bacteria (FLB) and particle‐associated bacteria (PAB). In the present study, we report evidence for bacterial association with C. polykrikoides in laboratory culture. Sampling was performed at different growth stages (lag, exponential and stationary) and pyrosequencing was used to identify taxa. As a result, the community structures of FLB and PAB were elucidated and significant differences between FLB and PAB were identified by hierarchical cluster analysis and the similarity profiles test (p = .05). The relative abundances of bacterial operational taxonomic units distinctly changed in response to the different phases of C. polykrikoides growth. The Roseobacter genus Marivita and the Flavobacterium genus Winogradskyella were dominant in the FLB and PAB associated with C. polykrikoides, respectively. The Roseobacter clade, which has also exhibited associations with C. polykrikoides blooms in field samples, may influence host cell growth through the provision of vitamins.     

Geology, tectonics, and the 2002-2003 eruption of the Semeru volcano, Indonesia: Interpreted from high-spatial resolution satellite imagery

The paper illustrates the application of high-spatial resolution satellite images in interpreting volcanic structures and eruption impacts in the Tengger-Semeru massif in east Java, Indonesia. We use high-spatial resolution images (IKONOS and SPOT 5) and aerial photos in order to analyze the structures of Semeru volcano and map the deposits. Geological and tectonic mapping is based on two DEMs and on the interpretation of aerial photos and four SPOT and IKONOS optical satellite images acquired between 1996 and 2002. We also compared two thermal Surface Kinetic Temperature ASTER images before and after the 2002-2003 eruption in order to delineate and evaluate the impacts of the pyroclastic density currents. Semeru's principal structural features are probably due to the tectonic setting of the volcano. A structural map of the Tengger-Semeru massif shows four groups of faults orientated N40, N160, N75, and N105 to N140. Conspicuous structures, such as the SE-trending horseshoe-shaped scar on Semeru's summit cone, coincide with the N160-trending faults. The direction of minor scars on the east flank parallels the first and second groups of faults. The Semeru composite cone hosts the currently active Jonggring-Seloko vent. This is located on, and buttressed against, the Mahameru edifice at the head of a large scar that may reflect a failure plane at shallow depth. Dipping 35° towards the SE, this failure plane may correspond to a weak basal layer of weathered volcaniclastic rocks of Tertiary age. We suggest that the deformation pattern of Semeru and its large scar may be induced by flank spreading over the weak basal layer of the volcano. It is therefore necessary to consider the potential for flank and summit collapse in the future. The last major eruption took place in December 2002-January 2003, and involved emplacement of block-and-ash flows. We have used the 2003 ASTER Surface Kinetic Temperature image to map the 2002-2003 pyroclastic density current deposits. We have also compared two 10 m-pixel images acquired before and after the event to describe the extent and impact of an estimated volume of 5.45 × 10⁶ m³ of block-and-ash flow deposits. An ash-rich pyroclastic surge escaped from one of the valley-confined block-and ash flows at 5 to 8 km distance from the crater and swept across the forest and tilled land on the SW side of the Bang River Valley. Downvalley, the temperature of the pyroclastic surge decreased and a mud-rich deposit coated the banks of the Bang River Valley. Thus, hazard mitigation at Semeru should combine: (1) continuous monitoring of the eruptive activity through an early-warning system, and (2) continuous remote sensing of the morphological changes in the drainage system due to the impact of frequent pyroclastic density currents and lahars.     

The rare earth element compositions of the Changjiang (Yangtze) and Huanghe (Yellow) river sediments

Thirty-four samples from the Changjiang and Huanghe were analyzed to characterize their rare earth element (REE) compositions. Although REE concentrations in the Changjiang sediments are higher than those of the Huanghe sediments, the former are less variable. Bulk samples and acid-leachable fractions have convex REE patterns and middle REE enrichments relative to upper continental crust, whereas flat patterns are present in the residual fractions. Source rock composition is the primary control on REE composition, and weathering processes play a minor role. Grain size exerts some influence on REE composition, as demonstrated by the higher REE contents of clay minerals in sediments from both rivers. Heavy minerals contribute about 10-20% of the total REE in the sediments. Apatite is rare in the river sediments, and contributes less than 2% of the REE content, but other heavy minerals such as sphene, allanite and zircon are important reservoirs of residual REE fractions. The Fe-Mn oxides phase accounts for about 14% of bulk REE content in the Changjiang sediments, which could be one of the more important factors controlling REE fractionation in the leachable fraction.     

A stochastic model for active fire detection using the thermal bands of MODIS data

Active fire detection using satellite thermal sensors usually involves thresholding the detected brightness temperature in several bands. Most frequently used features for fire detection are the brightness temperature in the 4-/spl mu/m wavelength band (T/sub 4/) and the brightness temperature difference between 4- and 11-/spl mu/m bands (/spl Delta/T=T/sub 4/-T/sub 11/). In this letter, the task of active fire detection is examined in the context of a stochastic model for target detection. The proposed fire detection method consists of applying a decorrelation transform in the (T/sub 4/,/spl Delta/T) space. Probability density functions for the fire and background pixels are then computed in the transformed variable space using simulated Moderate Resolution Imaging Spectroradiometer (MODIS) thermal data under different atmospheric humidity conditions and for cases of flaming and smoldering fires. The Pareto curve for each detection case is constructed. Optimal thresholds are derived by minimizing a cost function, which is a weighted sum of the omission and commission errors. The method has also been tested on a MODIS reference dataset validated using high-resolution SPOT images. The results show that the detection errors are comparable with the expected values, and the proposed method performs slightly better than the standard MODIS absolute detection method in terms of the lower cost function.     

Impact of climate change on water resources in Yongdam Dam Basin,Korea

The main purpose of this study is to investigate and evaluate the impact of climate change on the runoff and water resources of Yongdam basin, Korea. First, we construct global climate change scenarios using the YONU GCM control run and transient experiments, then transform the YONU GCM grid-box predictions with coarse resolution of climate change into the site-specific values by statistical downscaling techniques. The downscaled values are used to modify the parameters of a stochastic weather generator model for the simulation of the site-specific daily weather time series. The weather series is fed into a semi-distributed hydrological model called SLURP to simulate the streamflows associated with other water resources for the condition of 2CO₂. This approach is applied to the Yongdam dam basin in the southern part of Korea. The results show that under the condition of 2CO₂, about 7.6% of annual mean streamflow is reduced when it is compared with the current condition. Seasonal streamflows in the winter and autumn are increased, while streamflow in the summer is decreased. However, the seasonality of the simulated series is similar to the observed pattern An erratum to this article can be found at     

Distribution of barium and fulvic acid at the mica-solution interface using in-situ X-ray reflectivity

The interfacial structures of the basal surface of muscovite mica in solutions containing (1) 5 × 10⁻³ m BaCl₂, (2) 500 ppm Elliott Soil Fulvic Acid I (ESFA I), (3) 100 ppm Elliott Soil Fulvic Acid II (ESFA II), (4) 100 ppm Pahokee Peat Fulvic Acid I (PPFA), and (5) 5 × 10⁻³ m BaCl₂ and 100 ppm ESFA II were obtained with high resolution in-situ X-ray reflectivity. The derived electron-density profile in BaCl₂ shows two sharp peaks near the mica surface at 1.98(2) and 3.02(4) Å corresponding to the heights of a mixture of Ba²⁺ ions and water molecules adsorbed in ditrigonal cavities and water molecules coordinated to the Ba²⁺ ions, respectively. This pattern indicates that most Ba²⁺ ions are adsorbed on the mica surface as inner-sphere complexes in a partially hydrated form. The amount of Ba²⁺ ions in the ditrigonal cavities compensates more than 90% of the layer charge of the mica surface. The electron-density profiles of the fulvic acids (FAs) adsorbed on the mica surface, in the absence of Ba²⁺, had overall thicknesses of 4.9-10.8 Å and consisted of one broad taller peak near the surface (likely hydrophobic and positively-charged groups) followed by a broad humped pattern (possibly containing negatively-charged functional groups). The total interfacial electron density and thickness of the FA layer increased as the solution FA concentration increased. The sorbed peat FA which has higher ash content showed a higher average electron density than the sorbed soil FA. When the muscovite reacted with a pre-mixed BaCl₂-ESFA II solution, the positions of the two peaks nearest the surface matched those in the BaCl₂ solution. However, the occupancy of the second peak decreased by about 30% implying that the hydration shell of surface-adsorbed Ba²⁺ was partially substituted by FA. The two surface peaks were followed by a broad less electron-dense layer suggesting a sorption mechanism in which Ba²⁺ acts dominantly as a bridging cation between the mica surface and FA. When the muscovite reacted first with FA and subsequently with BaCl₂, more Ba²⁺ could be adsorbed on the FA-coated mica surface. The peak closest to the mica included Ba²⁺ ions adsorbed directly on the mica in an amount similar to that in the BaCl₂ solution but more broadly distributed. A second peak observed within the FA layer suggests that the FA coating provides additional sites for Ba²⁺ sorption. The results indicate that enhanced uptake of heavy metals can occur when an organic coating already exists on a mineral surface.     

Assessment of tributyltin contamination in a shipyard area using a mussel transplantation approach

Mussels (Mytilus galloprovincialis) were transplanted to seven stations around a large shipyard for 126 days to evaluate tributyltin (TBT) contamination. Although the application of TBT-based paints to ships is totally banned in Korea, butyltin compounds were found to accumulate in mussels following transplantation. Concentrations of TBT and total butyltins in transplanted mussels near the shipyard were in the range of 40-350 ng Sn/g and 74-530 ng Sn/g on a dry weight basis, respectively. Obviously, low TBT concentrations (6.0-53 ng Sn/gdw) were determined in mussels at four stations outside the shipyard. A negative gradient of TBT concentrations and TBT portion to total butyltin concentrations were found in both the surface water and transplanted mussels according to distance from the shipyard. In addition, TBT concentrations in surface water and transplanted mussels showed significant correlation (r(2) = 0.71; p < 0.001). These results indicate that the shipyard still releases fresh TBT into surrounding waters even after TBT regulation in Korea, and mussel transplantation is useful in evaluating TBT contamination in shipyard area.     

Simulation of the 1953 storm surge in the North Sea

The 1953 North Sea floods, the Big Flood, was one of the worst natural disasters in Europe in modern times and is probably one of the most studied severe coastal floods. Several factors led to the devastating storm surge along the southern North Sea coast in combination of strong and sustained northerly winds, invert barometric effect, high spring tide, and an accumulation of the large surge in the Strait of Dover. However, the storm waves and their roles during the 1953 North Sea storm surge are not well investigated. Therefore, the effect of wave setup due to breaking waves in the storm surge processes is investigated through numerical experiments. A coupled process-based tide-wave-surge model was used to investigate and simulate the storm surge in the North Sea during January 31–February 1, 1953 and validated by comparing with historical water level records at tide gauges and wave observations at light vessels in the North Sea. Meteorological forcing inputs for the period, January 27–February 3, 1953 are reproduced from ERA-20C reanalysis data with a constant correction factor for winds. From the simulation results, it is found that, in addition to the high water due to wind setup, wave setup due to breaking waves nearshore play a role of approximately 10% of the storm surge peaks with approximately 0.2 m. The resulting modeling system can be used extensively for the preparedness of the storm surge and wave of extreme condition, and usual barotropic forecast.