Determination of Trace Elements in Geological Reference Materials G‐3, GSP‐2 and SGD‐1a by Low‐Dilution Glass Bead Digestion and ICP‐MS

We present a revised alkali fusion method for the determination of trace elements in geological samples. Our procedure is based on simple acid digestion of powdered low‐dilution (flux : sample ≈ 2 : 1) glass beads where large sample dilution demanded by high total dissolved solids, a main drawback of conventional alkali fusion, could be circumvented. Three geological reference materials (G‐3 granite, GSP‐2 granodiorite and SGD‐1a gabbro) decomposed by this technique and routine tabletop acid digestion were analysed for thirty trace elements using a quadrupole ICP‐MS. Results by conventional acid digestion distinctly showed poor recoveries of Zr, Hf and rare earth elements due to incomplete dissolution of resistant minerals. On the other hand, results obtained by our method were in reasonable agreement with reference data for most analytes, indicating that refractory minerals were efficiently dissolved and volatile loss was insignificant.     

Toxicological impact assessment of heavy metal contamination on macrobenthic communities in southern coastal sediments of Korea

In the heavily industrialized Masan Bay of southern coast, Korea, the potential harmful effects of heavy metals (Cd, Co, Cu, Ni, Pb, Sn, Zn, and Hg) were evaluated in terms of the pollution load index (PLI) and ecological risk assessment index (ERI) methods, and the results obtained were considered alongside the health of the macrobenthic fauna communities. The results revealed that the bay sediments, especially in the inner bay and the outfall area of a sewage treatment plant, are exposed to moderate to serious levels of metal pollution. Hg and Cd contributed the most to the potential toxicity response indices in sediments recently deposited in the bay. The potential ecological risk assessment of heavy metals in the bay was highlighted by the use of the benthic biological pollution index (BPI), suggesting that the ERI is a useful toxicity response index, which can quantify the overall ecological risk level to a target environment.     

Correlations Between Shear Wave Velocity and In-Situ Penetration Test Results for Korean Soil Deposits

Shear wave velocity (V _S) can be obtained using seismic tests, and is viewed as a fundamental geotechnical characteristic for seismic design and seismic performance evaluation in the field of earthquake engineering. To apply conventional geotechnical site investigation techniques to geotechnical earthquake engineering, standard penetration tests (SPT) and piezocone penetration tests (CPTu) were undertaken together with a variety of borehole seismic tests for a range of sites in Korea. Statistical modeling of the in-situ testing data identified correlations between V _S and geotechnical in-situ penetration data, such as blow counts (N value) from SPT and CPTu data including tip resistance (q _t), sleeve friction (f _s), and pore pressure ratio (B _q). Despite the difference in strain levels between conventional geotechnical penetration tests and borehole seismic tests, it is shown that the suggested correlations in this study is applicable to the preliminary determination of V _S for soil deposits.     

An assessment of the utilization of waste resources for the immobilization of Pb and Cu in the soil from a Korean military shooting range

Military shooting range soils contaminated by heavy metals have been subjected to remediation efforts to alleviate the detrimental effects of exposure on humans and the surrounding environment. Waste materials can be used as cost-effective soil amendments to immobilize heavy metals in contaminated soils. In this study, naturally occurring lime-based waste materials including egg shells, oyster shells, and mussel shells were assessed for their effectiveness toward heavy metal immobilization in military shooting range soil in Korea. Soil was treated in batch leaching experiments with 0, 2.5, 5, 10, and 15% of each lime-based waste material. The results showed that the lime-based waste materials effectively reduced water-soluble Pb at an application rate of 2.5% by weight of the soil. Increase in soil pH from 6.6 to 8.0 was considered to be the main chemistry of Pb immobilization, which was supported by the formation of insoluble Pb species at high pH values as confirmed by the visual MINTEQ thermodynamic model. In contrary, water-soluble Cu was increased in the lime-based waste material-treated soils when compared to the untreated soil. This was likely attributed to the formation of soluble Cu?CDOC (dissolved organic carbon) complexes as all lime-based waste materials applied increased DOC contents in the soil. Therefore, care must be taken in selecting the appropriate amendment for immobilizing metals in shooting range soils.     

Multi-proxy evidence for late Holocene anthropogenic environmental changes at Bongpo marsh on the east coast of Korea

We present a multi-proxy record (pollen, microscopic charcoal, magnetic susceptibility, carbon-isotopic composition, total organic carbon [TOC], carbon/nitrogen [C/N] ratios, and particle size) of the late Holocene environmental change and human activities from Bongpo marsh on the east coast of Korea. Mutual interaction between the environment and humans during the late Holocene has not been properly investigated in Korea due to the lack of undisturbed samples with high sedimentation rates. In this study, the history of human responses to late Holocene environmental changes is clearly reconstructed using a multi-proxy paleoenvironmental approach that has not previously been applied in Korea. The evidence from Bongpo marsh indicates that 1) Bongpo marsh began to develop ca. 650 BC as a coastal lagoon was rapidly filled with organic matter, 2) agricultural disturbance around the study site remained slight until ca. AD 600, 3) full-scale intensive agriculture prevailed and the area of deforestation increased between ca. AD 600 and ca. AD 1870, and 4) the land use changed from lowland rice agriculture to upland cultivation when agricultural productivity declined after AD 1870, probably due to severe deforestation and the consequent heavy influx of clastic sediment on rice fields, as described in various historical documents.     

Promises and Perils of Decentralized Forest Governance: The Case of Indonesia's Forest Management Units in Reducing Emission from Deforestation and Forest Degradation (REDD+)

Indonesia's forest management unit (Kesatuan Pengelolaan Hutan or KPH) system can be a promising mechanism for balancing international and national interests for global carbon mitigation initiatives with local interests in project implementation. We discuss the potential role of the KPH system in implementing REDD+ (Reducing Emission from Deforestation and Forest Degradation) projects and improving decentralized forest governance. Substantial financial gains from international initiatives like REDD+ and others can provide appropriate motivation for the central government to ensure successful decentralization of forest management. Development and implementation of REDD+ activities can also support the KPHs in performing their basic functions: conducting forest inventory, developing and implementing forest management plans, and strengthening communication and coordination with local communities. However, engaging indigenous peoples and local communities, which is a legal mandate for the system, will require building some measure of democratic process that can hold the KPHs accountable to local people.     

Geologic controls on the chemical behaviour of nitrate in riverside alluvial aquifers,Korea

To investigate the origin and behaviour of nitrate in alluvial aquifers adjacent to Nakdong River, Korea, we chose two representative sites (Wolha and Yongdang) having similar land‐use characteristics but different geology. A total of 96 shallow groundwater samples were collected from irrigation and domestic wells tapping alluvial aquifers. About 63% of the samples analysed had nitrate concentrations that exceeded the Korean drinking water limit (44·3 mg l^?1 NO₃^?), and about 35% of the samples had nitrate concentrations that exceeded the Korean groundwater quality standard for agricultural use (88·6 mg l^?1 NO₃^?). Based on nitrogen isotope analysis, two major nitrate sources were identified: synthetic fertilizer (about 4‰ δ¹⁵N) applied to farmland, and animal manure and sewage (15–20‰ δ¹⁵N) originating from upstream residential areas. Shallow groundwater in the farmland generally had higher nitrate concentrations than those in residential areas, due to the influence of synthetic fertilizer. Nitrate concentrations at both study sites were highest near the water table and then progressively decreased with depth. Nitrate concentrations are also closely related to the geologic characteristics of the aquifer. In Yongdang, denitrification is important in regulating nitrate chemistry because of the availability of organic carbon from a silt layer (about 20 m thick) below a thin, sandy surface aquifer. In Wolha, however, conservative mixing between farmland‐recharged water and water coming from a village is suggested as the dominant process. Mixing ratios estimated based on the nitrate concentrations and the δ¹⁵N values indicate that water originating from the village affects the nitrate chemistry of the shallow groundwater underneath the farmland to a large extent. Copyright © 2003 John Wiley & Sons, Ltd.     

UBVVI Surface Photometry of the Spiral Galaxy NGC 300 in the Sculptor Group

We present UBVI surface photometry over a 20.5' × 20.5' area of the late-type spiral galaxy NGC 300. We have derived isophotal maps, surface brightness profiles, ellipticity profiles, position angle profiles, and color profiles. By merging our I-band measurements with those of Boker et al. based on Hubble Space Telescope observations, we have obtained combined I-band surface brightness profiles for the region 0.02" < r < 500" and have decomposed the profiles into three components: a nucleus, a bulge, and an exponential disk.     

Distinction between sortable silts and aggregated particles in muddy intertidal sediments of the East Frisian Wadden Sea, southern North Sea

In muddy sediments, the distinction between sortable silt and aggregated silty clay is important for the understanding of fine particle dynamics because both have different hydraulic properties. The Wadden Sea of the southern North Sea is severely depleted in fine-grained sediments mainly due to high energy levels along the diked coastline. As a result, muddy sediments are restricted to a narrow belt along the diked mainland shore. In the present study, the mechanism by which this mud is deposited and how floc deposition and break-up are reflected in the size distribution, has been investigated. For this purpose, surficial sediments from four intertidal nearshore transects were monitored and repeatedly sampled in the course of two years. High-resolution grain-size analyses were performed by an automated settling tube and a Sedigraph particle analyser for the sand and mud fractions, respectively.The grain size frequency distributions of the fine fractions demonstrate that the Wadden Sea muds are composed of two subpopulations, a well-sorted coarse silt and an unsorted silty clay population. A depletion of grain size around 8 μm (7 phi) demarcates the grain-size boundary between the two populations, suggesting that the finer mud population (< 8 μm) is deposited in the form of flocs and aggregates which are hydraulically equivalent to the local sands and coarser silts. Floc break-up and reconstitution in response to seasonally changing energy regimes lead to apparent seasonal sedimentation patterns in the back-barrier tidal basins. Furthermore, in the course of sample preparation, the flocs and aggregates are broken down into their constituent particles. This mechanical artefact in the size distributions produces an artificial seasonal fining/coarsening pattern. It was found that the comparison of clay/silt and < 8 μm/63 − 8 μm particle ratios are good indicators of floc behaviour. Higher ratios are found in mixed flats which are relatively protected from wave action, thereby promoting deposition of flocs. In addition, progressive size sorting and mixing processes along the transects are recognized in the frequency distributions of sands. The skewness pattern shows a landward decrease in positive values, which is exactly opposite to previously reported patterns, suggesting progressive winnowing of fine particles caused by increased wave action over the last decade. This effect of climate change further promotes depletion of fine-grained sediments in the basin.     

Granitoids and Their Magnetic Susceptibility in South Korea

Abstract: Magnetic susceptibility (MS) measurements were carried out for 1,120 samples in the Middle Proterozoic to Early Tertiary granitoids so far recognized in South Korea, and the lateral and spatial variation of their magnetic susceptibility, i.e., content of magnetite, is studied. The Middle Proterozoic two mica granitoids related to cassiterite (Sn) deposits in northeastern part of the Sobaegsan Massif show very low MS (less than 0.3 A‐ 10^‐3 SI unit), and the Permo‐Triassic tonalitic to granodioritic and monzonitic rocks which are barren in mineralization, distributed in the middle part of South Korea also show low MS (less than 1 A‐ 10^‐3 SI unit). On the contrary the Late Triassic to Jurassic granitoids (= Daebo granitoids) which were evolved from tonalite through granodiorite to granite, and are most widely distributed in South Korea, show a wide variation on MS. Particularly in the Andong, Igsan, Gimcheon and Geochang areas, the granitoids which are barren in mineralization, are characterized by high MS (more than 10 A‐ 10^‐3 SI unit). The Chuncheon, Jecheon, Namyang and Geumsan plutons related to molybdenite (Mo) and/or wolframite or scheelite (W), and fluorite (F) mineralizations show a little high MS (more than 3 A‐ 10^‐3 SI unit). However, more than 60% of the Daebo granitoids show low MS (less than 3 A‐ 10^‐3 SI unit) and the rest show a little high MS (more than 3 A‐ 10^‐3 SI unit). Heterogeneous distribution of magnetite content in the Daebo granitoids is considered to reflect heterogeneity of redox state of the source materials for these granitoids. The Cretaceous to Early Tertiary granitoids (= Bulgugsa granitoids) in the Gyeongsang Basin had been generally evolved in the order of tonalite, diorite, granodiorite, granite and alkali‐feldspar granites, which are closely related to base metal ore deposits, and mostly show higher MS (more than 3 A‐ 10^‐3 SI unit) than other granitoids mentioned above, although some exceptions are recognized in highly evolved alkali‐feldspar granites (SiO₂ > 76%). In contrast, as most of the highly oxidized or evolved Cretaceous granitoids distributed in areas other than the Gyeongsang Basin show lower MS than those of the Gyeongsang Basin, and appear to be magnetite free, ilmenite‐series granites, but they might be hematite bearing magnetite‐series granitoids. Highly oxidized nature of the Bulgugsa granitoids may be due to high Fe₂O₃/FeO ratio of the source materials and also high level intrusion style of the granitic magma activities. Most of the granitic rocks of the Middle Proterozoic, Permo‐Triassic and more than 60% of the Late Triassic to Jurassic (Daebo granitoids) belong to ilmenite–series, however less than 40% of the Daebo granitoids and most Cretaceous ones are magnetite–series. Thus, the granitic magma intruded in Korean Peninsula became oxidized while the intrusive ages become younger.