XUV Photometer System (XPS): Improved Solar Irradiance Algorithm Using CHIANTI Spectral Models

Solar soft X-ray (XUV) radiation is highly variable on all time scales and strongly affects Earth’s ionosphere and upper atmosphere; consequently, the solar XUV irradiance is important for atmospheric studies and for space weather applications. Although there have been several recent measurements of the solar XUV irradiance, detailed understanding of the solar XUV irradiance, especially its variability during flares, has been hampered by the broad bands measured in the XUV range. In particular, the simple conversion of the XUV photometer signal into irradiance, in which a static solar spectrum is assumed, overestimates the flare variations by more than a factor of two as compared to the atmospheric response to the flares. To address this deficiency in the simple conversion, an improved algorithm using CHIANTI spectral models has been developed to process the XUV Photometer System (XPS) measurements with its broadband photometers. Model spectra representative of quiet Sun, active region, and flares are combined to match the signals from the XPS and produce spectra from 0.1 to 40 nm in 0.1-nm intervals for the XPS Level 4 data product. The two XPS instruments are aboard NASA’s Solar Radiation and Climate Experiment (SORCE) and Thermosphere, Ionosphere, Mesosphere, Energetics, and Dynamics (TIMED) satellites. In addition, the XPS responsivities have been updated for the latest XPS data processing version. The new XPS results are consistent with daily variations from the previous simple conversion technique used for XPS and are also consistent with spectral measurements made at wavelengths longer than 27 nm. Most importantly, the XPS flare variations are reduced by factors of 2 – 4 at wavelengths shorter than 14 nm and are more consistent, for the first time, with atmospheric response to solar flares. Along with the details of the new XPS algorithm, several comparisons to dayglow and photoelectron measurements and model results are also presented to help verify the accuracy of the new XUV irradiance spectra.     

Developing environmental indices using fuzzy numbers ordered weighted averaging (FN-OWA) operators

Environmental indices (EI) constitute a common communication tool that is often used to describe the overall status of environmental systems (air, water and soil). EI development entails the use of mathematical operators to aggregate various non-commensurate input parameters in a logical manner. The ordered weighted averaging (OWA) operator is a general mean type operator that provides flexibility in the aggregation process such that the aggregated value is bounded between minimum and maximum values of the input parameters. This flexibility of the OWA operator is realized through the concept of orness, which is a surrogate for decision maker’s attitude. The type of input parameters also affects the choice of aggregation operators. If the input parameters are linguistic or fuzzy, the aggregation through OWA operators is not possible, and the use of fuzzy arithmetic is warranted. The concept of fuzzy number OWA (FN-OWA) operators is explored to handle situations in which one or more input parameter has fuzzy (or linguistic) values. The proposed approach is demonstrated using data provided in an earlier study by Swamee and Tyagi (ASCE J Environ Eng 126(5):451–455, 2000) for establishing water quality indices. Multiple hypothetical scenarios are also generated to highlight the utility and sensitivity of the proposed approach.     

Seismic fragility of reinforced concrete girder bridges using Bayesian belief network

Infrastructure owners and operators, or governmental agencies, need rapid screening tools to prioritize detailed risk assessment and retrofit resources allocation. This paper provides one such tool, for use by highway administrations, based on Bayesian belief network (BBN) and aimed at replacing so‐called generic or typological seismic fragility functions for reinforced concrete girder bridges. Resources for detailed assessments should be allocated to bridges with highest consequence of damage, for which site hazard, bridge fragility, and traffic data are needed. The proposed BBN based model is used to quantify seismic fragility of bridges based on data that can be obtained by visual inspection and engineering drawings. Results show that the predicted fragilities are of sufficient accuracy for establishing relative ranking and prioritizing. While the actual data and seismic hazard employed to train the network (establishing conditional probability tables) refer to the Italian bridge stock, the network structure and engineering judgment can easily be adopted for bridges in different geographical locations. Copyright © 2015 John Wiley & Sons, Ltd.     

Sounding rocket measurements of the solar soft X-ray irradiance

Measurements of the solar soft X-ray (XUV: 2 nm to 30 nm) irradiance were performed from a sounding rocket payload flown from White Sands Missile Range, New Mexico on 4 October 1993 and again on 3 November 1994. The soft X-ray instrumentation comprised of silicon photodiodes with thin films deposited directly onto their active areas. The deposited material and its thickness in conjunction with the sensitivity of an uncoated diode determine the passband and the sensitivity of these photometric devices. The measurements are interpreted in terms of appropriate SERF 1 (Hinteregger, Fukui, and Gilson, 1981) model solar spectra. It is found that the data are consistent with a solar spectrum that is on average approximately a factor of two times the model solar spectra. It is shown that the measured irradiances are in reasonable agreement with other experiments.     

Coastal erosion vs riverine sediment discharge in the Arctic Shelf seas

This article presents a comparison of sediment input by rivers and by coastal erosion into both the Laptev Sea and the Canadian Beaufort Sea (CBS). New data on coastal erosion in the Laptev Sea, which are based on field measurements and remote sensing information, and existing data on coastal erosion in the CBS as well as riverine sediment discharge into both the Laptev Sea and the CBS are included. Strong regional differences in the percentages of coastal erosion and riverine sediment supply are observed. The CBS is dominated by the riverine sediment discharge (64.45᎒⁶ t a^-1) mainly of the Mackenzie River, which is the largest single source of sediments in the Arctic. Riverine sediment discharge into the Laptev Sea amounts to 24.10᎒⁶ t a^-1, more than 70% of which are related to the Lena River. In comparison with the CBS, the Laptev Sea coast on average delivers approximately twice as much sediment mass per kilometer, a result of higher erosion rates due to higher cliffs and seasonal ice melting. In the Laptev Sea sediment input by coastal erosion (58.4᎒⁶ t a^-1) is therefore more important than in the CBS and the ratio between riverine and coastal sediment input amounts to 0.4. Coastal erosion supplying 5.6᎒⁶ t a^-1 is less significant for the sediment budget of the CBS where riverine sediment discharge exceeds coastal sediment input by a factor of ca. 10.     

Determination of the properties of Mercury's magnetic field by the MESSENGER mission

The MESSENGER mission to Mercury, to be launched in 2004, will provide an opportunity to characterize Mercury's internal magnetic field during an orbital phase lasting one Earth year. To test the ability to determine the planetary dipole and higher-order moments from measurements by the spacecraft's fluxgate magnetometer, we simulate the observations along the spacecraft trajectory and recover the internal field characteristics from the simulated observations. The magnetic field inside Mercury's magnetosphere is assumed to consist of an intrinsic multipole component and an external contribution due to magnetospheric current systems described by a modified Tsyganenko 96 model. Under the axis-centered-dipole approximation without correction for the external field the moment strength is overestimated by ∼4% for a simulated dipole moment of , and the error depends strongly on the magnitude of the simulated moment, rising as the moment decreases. Correcting for the external field contributions can reduce the error in the dipole term to a lower limit of ∼1-2% without a solar wind monitor. Dipole and quadrupole terms, although highly correlated, are then distinguishable at the level equivalent to an error in the position of an offset dipole of a few tens of kilometers. Knowledge of the external magnetic field is therefore the primary limiting factor in extracting reliable knowledge of the structure of Mercury's magnetic field from the MESSENGER observations.     

Brine-pool deposition for the Zn–Pb–Cu massive sulphide deposits of the Bathurst mining camp, New Brunswick, Canada. II. Ocean anoxia during mineralisation

Current models of massive sulphide ore genesis in the Bathurst mining camp, New Brunswick, involve settling of sulphide particles from a stagnating, low-salinity hydrothermal plume spreading laterally in an anoxic ocean layer with minimal sulphate content. There is fragmentary evidence of ocean anoxia in the form of local fine lamination in the shales that host some of the deposits but the total organic carbon, S, Fe, U/Th, Ni/Co, V/Ni and V/Cr relationships indicate deposition under oxic or dysoxic conditions. Vanadium and Mn values range from oxic to anoxic and sulphate-reducing to non-sulphate reducing but Mn may be anomalously low due to derivation by erosion of acidic volcanic rocks. The somewhat equivocal physical and chemical data, combined with the likely disturbing effects of penecontemporaneous volcanism, considerably weaken the case for an anoxic bottom layer in a static ocean. The presence of barite with ambient seawater ³⁴S values in Brunswick no. 12 ore, and the abundance of sulphate in modern euxinic basin waters, make a sulphate-free layer unlikely, even if anoxic. Sulphate-bearing, low-salinity fluids mixing with seawater would lead to growth of barite-bearing chimneys and baritic rubble mounds, which are not observed. A model involving brine-pool deposition better explains the major features of the Bathurst ores.     

Seismic and Petrophysical Relationships from UK Continental Shelf Rocks at Elevated Pressures

Abstract

There are few published seismic (P- and S-waves) properties for seafloor bedrocks. At low pressures (1 to 10 MPa), velocities and attenuations are determined mainly by open microcracks. At higher pressures, the microcracks close, and the velocities and attenuations depend primarily on the matrix porosity. We have investigated both the relationships between the acoustic, petrophysical, and geological properties of the rocks at 40 MPa pressure and the effect of microcracks on the acoustic properties at 10 MPa pressure. In this paper we discuss the former; the latter will be discussed separately.

P- and S-wave velocity and attenuation measurements were carried out on a suite of seabed sedimentary and igneous rocks at effective pressures from 10 to 40 MPa at ultrasonic frequencies. The porosities and permeabilities of the rocks ranged from 0% to 32% and 0 to 110 mDarcy, respectively. Characterization of the rocks revealed that most of the sandstones have a substantial clay content (kaolinite, illite, and chlorite) and fractures. Most of the igneous rocks are chloritized.

The seismic properties of the rocks are markedly lower than those of similar continental rocks because of the microporosity formed by the alteration of feldspars, micas, and mafic minerals to clays (e.g., chloritization of pyroxenes) and the corresponding reduction of the elastic moduli. The results of this study suggest that the values of velocities and quality factors used for ocean acoustic propagation models are lower than normally assumed.