Defining physico-chemical variables, chlorophyll-a and Secchi depth reference conditions in northeast eco-region lakes, China

Establishing reference conditions for regional lakes is necessary to assess human impact on aquatic ecosystems, protect water quality and biotic integrity. The northeast eco-region lakes often present a marked seasonal variability in hydrological, biological and geochemical processes, which could affect physico-chemical variables, chlorophyll-a and Secchi depth reference conditions. Reference conditions were calculated using two different methods: lake population distribution method and trisection method. General physico-chemical reference conditions (pH, conductivity, BOD and nutrients) and chlorophyll-a, and Secchi depth reference conditions were established using the two approaches combined with the analysis of seasonal variability for each parameter for shallow and deep lake types in the northeast eco-region lakes. The results indicated that depth was an important factor affecting physico-chemical variables, chlorophyll-a and Secchi depth reference values. Moreover, the seasonal differences in parameters were also assessed using a non-parametric repeated measure ANOVA (Friedman test) in the shallow and deep lakes. Some parameters showed a seasonal variability for shallow and deep lakes. The least restrictive reference values of the four seasons were proposed to simplify the water quality assessment for regional lake management goals. These results indicated that the 50th percentile (median) value from the best one-third of the nutrient-concentration data distributions is more appropriate for the northeast eco-region lakes.     

Accumulation and risk of heavy metals in relation to agricultural intensification in the river sediments of agricultural regions

The enrichment characteristics and risk of heavy metals were studied in the sediments of Liucha River in Chao Lake Valley, where agricultural intensification has developed rapidly since the 1980s. The results revealed that Cd, Pb and Zn showed the lowest levels in the upper reaches and peak values in the lower reaches, increasing from 0.064, 7.75 and 59.75 mg/kg to 0.176, 12.33 and 96.82 mg/kg on average, respectively. Enrichment factor (EF) analysis showed that the EF values of Cd, Pb and Zn (maximum 4.76, 2.51 and 2.74, respectively) all increased from the upper reaches to the lower reaches (>1.5), while correlation analysis and cluster analysis showed that they primarily originated from the extensive use of phosphate fertilizer. In addition, the comprehensive potential ecological risk due to Cd, Cr, Cu, Ni, Pb and Zn in the sediments showed low degree, but Cd showed moderate and high risk at some sites. Therefore, heavy metal pollution due to agricultural intensification in the agricultural regions of Chao Lake Valley should be given great attention during management of the water environment.     

Past atmospheric trace metal deposition in a remote lake (Lake Ngoring) at the headwater areas of Yellow River,Tibetan Plateau

A complete record derived from a core dated both by ²¹⁰Pb and ¹³⁷Cs chronologies from Lake Ngoring at the headwater areas of the Yellow River provides new insight into the changing atmospheric deposition of trace metals including Cd, Cr, Cu, Ni, Pb, and Zn. This study showed that there was an inflection in the early 1960s, before which both fluxes and contents of Cd, Ni, Pb, and Zn remained relatively steady or slowly increased, and thereafter continued increases both in fluxes and contents were found. Taking Pb as an example, the flux increased from 0.13 (before 1960) to 0.25 mg m^?2 a^?1 (averaged 1963–2006). According to atmospheric flux calculations using Al as a reference element, atmospheric fluxes of trace metals generally showed a rapid increase and peaked in recent years, closely following the historical economic development of the neighboring region, mainly for Qinghai and Gansu provinces. The atmospheric inventory for Zn was the highest, reaching 1.068 g m^?2, while the lowest was for Cd, at only 0.079 gm^?2. The percentage proportions of atmospheric deposition for Cd, Ni, and Zn were 37, 12, and 8.7 %, respectively. Hence, the atmospheric contribution to the trace metal content via long range transport is not negligible when considering input of materials to lake ecosystems.     

Responses of microorganisms and enzymes to soil contamination with metazachlor

A greenhouse pot experiment was conducted at the University of Warmia and Mazury in Olsztyn, with the aim of describing the influence of metazachlor on counts and biodiversity of soil microorganisms, soil enzymatic activity, physicochemical properties of soil and yield of spring oilseed rape. The first experimental factor was soil contamination with increasing rates of metazachlor: 0 (soil without the herbicide), 0.333 (recommended by the manufacturer), 6.666, 13.332, 26.665, 53.328, 106.656 and 213.312 mg kg^?1 dm of soil, while the second factor comprised two dates of determination: 30 and 60 days after starting the experiment. The tested herbicide had an adverse effect on reproduction of all analyzed microorganisms: oligotrophic bacteria and their endospore forms, Azotobacter spp. bacteria, organotrophic bacteria, actinomycetes and fungi. The values of the colony development and eco-physiological diversity indices decreased under the influence of excessive doses of the herbicide. Also, significant fluctuation in the enzymatic activity of soil was observed in response to the higher doses of metazachlor and depending on the date of determinations. The herbicide had an invariably negative influence on the activity of soil enzymes, causing the inhibition of dehydrogenases, catalase, urease, acid phosphatase, alkaline phosphatase, arylsulfatase and β-glucosidase. The physicochemical status of soil depended significantly on the degree of soil contamination with the herbicide, same as the yield of spring oilseed rape.     

Streamflow response to regional climate model output in the mountainous watershed: a case study from the Swiss Alps

Regional climate model (RCM) outputs are often used in hydrological modeling, in particular for streamflow forecasting. The heterogeneity of the meteorological variables such as precipitation, temperature, wind speed and solar radiation often limits the ability of the hydrological model performance. This paper assessed the sensitivity of RCM outputs from the PRUDENCE project and their performance in reproducing the streamflow. The soil and water assessment tool was used to simulate the streamflow of the Rhone River watershed located in the southwestern part of Switzerland, with the climate variables obtained from four RCMs. We analyzed the difference in magnitude of precipitation, maximum and minimum air temperature, and wind speed with respect to the observed values from the meteorological stations. In addition, we also focused on the impact of the grid resolution on model performance, by analyzing grids with resolutions of 50 × 50 and 25 × 25 km². The variability of the meteorological inputs from various RCMs is quite severe in the studied watershed. Among the four different RCMs, the Danish Meteorological Institute provided the best performance when simulating runoff. We found that temperature lapse rate is significantly important in the mountainous snow and glacier dominated watershed as compared to other variables like precipitation, and wind speed for hydrological performance. Therefore, emphasis should be given to minimum and maximum temperature in the bias correction studies for downscaling climatic data for impact modeling in the mountainous snow and glacier dominated complex watersheds.     

Behaviour of radiogenic Pb in zircon during ultrahigh-temperature metamorphism: an ion imaging and ion tomography case study from the Kerala Khondalite Belt,southern India

Zircon crystals from a locally charnockitized Paleoproterozoic high-K metagranite from the Kerala Khondalite Belt (KKB) of southern India have been investigated by high-spatial resolution secondary ion mass spectrometry analysis of U–Th–Pb and rare earth elements (REE), together with scanning ion imaging and scanning ion tomography (depth-profiled ion imaging). The spot analyses constrain the magmatic crystallization age of the metagranite to ca. 1,850 Ma, with ultrahigh-temperature (UHT) metamorphism occurring at ca. 570 Ma and superimposed charnockite formation at ca. 520–510 Ma, while the ion imaging reveals a patchy distribution of radiogenic Pb throughout the zircon cores. Middle- to heavy-REE depletion in ca. 570 Ma zircon rims suggests that these grew in equilibrium with garnet and therefore date the UHT metamorphism in the KKB. The maximum apparent ²⁰⁷Pb/²⁰⁶Pb age obtained from the unsupported radiogenic Pb concentrations is also consistent with formation of the Pb patches during this event. The superimposed charnockitization event appears to have caused additional Pb-loss in the cores and recrystallization of the rims. The results of depth-profiling of the scanning ion tomography image stack show that the Pb-rich domains range in size from <5 nm to several 10 nm (diameter if assumed to be spherical). The occurrence of such patchy Pb has previously been documented only from UHT metamorphic zircon, where it likely results from annealing of radiation-damaged zircon. The formation of a discrete, heterogeneously distributed and subsequently immobile Pb phase effectively arrests the normal Pb-loss process seen at lower grades of metamorphism.     

Petrogenesis of a voluminous Quaternary adakitic volcano: the case of Baru volcano

The origin of adakite magmas remains controversial because initially the term adakite had petrogenetic significance implying an origin by direct melting of the eclogitized subducting oceanic crust. Many models have been produced for their origin, and until now there has not been a straightforward method to discriminate between these models in a given adakite suite. Here, we use detailed chronological and geochemical studies of selected adakitic edifices that allows for the determination of the magmatic output rate parameter (Qe), which has been correlated with the rates of magma generation deep within subduction zones. By providing temporal and eruption rate estimates, we provide constraints on the possible petrogenetic processes involved in the generation of adakite-like signatures. Adakite magmas derived from the melting of the subducting slab should be volumetrically insignificant when compared to the adakite-like magmas produced by typical arc magma generation processes. In this study, we use this observation and the extraordinary stratigraphic exposure from Miocene to present in an adakitic volcano in Panama and to study the temporal and chemical variation in erupted magmas to estimate rates of magma generation. Detailed chemical and geochronological analyses of Baru volcano indicate that the volcanic edifice was constructed in its entirety during the Quaternary and magmas display adakite-like features such as steep rare earth elements patterns, pronounced depletions in the heavy rare earth elements, low Y, high Sr, and high Sr/Y. The magmatic output rates (Qe) that we have calculated show that compared to other typical adakitic volcanoes, most of the volcanic edifice of Baru volcano was constructed extremely rapidly (<~213 k.a.) and in time frames that are similar to typical arc volcanoes. The observed chemical and mineralogical variation, coupled with the high magma production rates, indicate that Baru volcano is more representative of a typical arc volcano than a small-volume melt of the subducting oceanic crust. The technique we outline may have broader application in determining the petrogenetic conditions of other adakite suites.     

Origin and significance of poikilitic and mosaic peridotite xenoliths in the western Pannonian Basin: geochemical and petrological evidences

Peridotite xenoliths erupted by alkali basaltic volcanoes in the western Pannonian Basin can be divided into two fundamentally contrasting groups. Geochemical characteristics of the abundant protogranular, porphyroclastic and equigranular nodules suggest that these samples originate from an old consolidated and moderately depleted lithospheric mantle domain. In contrast, the geochemical features of the worldwide rare, but in the Pannonian Basin relatively abundant, poikilitic xenoliths attest to a more complex evolution. It has been argued that the origin of the peculiar texture and chemistry may be intimately linked to melt/rock reactions at successively decreasing liquid volumes in a porous melt flow system. The most likely site where such reactions can take place is the asthenosphere–lithosphere boundary. In this context, poikilitic xenoliths may provide petrological and geochemical evidence for reactions between magmatic liquids issued from the uprising asthenosphere and the solid mantle rocks of the lithosphere. These reactions are important agents of the thermal erosion of the lithosphere; thus, they could have considerably contributed to the thinning of the lithosphere in the Pannonian region. We suggest that in the Pannonian Basin, there could be a strong relation between the unusual abundance of poikilitic mantle xenoliths and the strongly eroded lithosphere.     

Overstepping the garnet isograd: a comparison of QuiG barometry and thermodynamic modeling

The consequences of overstepping the garnet isograd reaction have been investigated by comparing the composition of garnet formed at overstepped P–T conditions (the overstep or “OS” model) with the P–T conditions that would be inferred by assuming garnet nucleated in equilibrium with the matrix assemblage at the isograd (the equilibrium or “EQ” model). The garnet nucleus composition formed at overstepped conditions is calculated as the composition that produces the maximum decrease in Gibbs free energy from the equilibrated, garnet-absent, matrix assemblage for the bulk composition under study. Isopleths were then calculated for this garnet nucleus composition assuming equilibrium with the matrix assemblage (the EQ model). Comparison of the actual P–T conditions of nucleation (the OS model) with those inferred from the EQ model reveals considerable discrepancy between the two. In general, the inferred garnet nucleation P–T conditions (the EQ model) are at a lower temperature and higher or lower pressure (depending on the coexisting calcic phase(s)) than the actual (OS model) nucleation conditions. Moreover, the degree of discrepancy increases with the degree of overstepping. Independent estimates of the pressure of nucleation of garnet were made using the Raman shift of quartz inclusions in garnet (quartz-in-garnet or QuiG barometry). To test the validity of this method, an experimental synthesis of garnet containing quartz inclusions was made at 800 °C, 20 kbar, and the measured Raman shift reproduced the synthesis conditions to within 120 bars. Raman band shifts from three natural samples were then used to calculate an isochore along which garnet was presumed to have nucleated. Model calculations were made at several temperatures along this isochore (the OS model), and these P–T conditions were compared to those computed assuming equilibrium nucleation (the EQ model) to estimate the degree of overstepping displayed by these samples. A sample from the garnet isograd in eastern Vermont is consistent with overstepping of around 10 degrees and 0.6 kbar (affinities of around 2 kJ/mole garnet). A sample from the staurolite–kyanite zone in the same terrane requires overstepping of around 50 °C and 2–5 kbar (affinities of around 10–18 kJ/mole garnet). A similar amount of overstepping was inferred for a blueschist sample from Sifnos, Greece. These results indicate that overstepping of garnet nucleation reactions may be common and pronounced in regionally metamorphosed terranes, and that the P–T conditions and paths inferred from garnet zoning studies may be egregiously in error.     

Thermal and rheological controls on the formation of mafic enclaves or banded pumice

Magma mixing can occur in a fluid manner to produce banded pumice or in a brittle manner to form enclaves. We propose that the critical control on mixing style is a competition between developing networks of crystals in the intruding magma that impart a strength to the magma and melting and disrupting those networks in the host. X-ray computed tomography analysis demonstrates that banded pumice from the 1915 Mt. Lassen eruption lacks crystal networks. In contrast, rhyodacite hosts with mafic enclaves from Chaos Crags contain well-developed networks of large crystals. We present a one-dimensional conductive cooling model that predicts mixing style, either ductile or brittle, as a function of magma compositions, temperatures, and the size of the intruding dike. Our model relies on three assumptions: (1) Mixing is initiated by the injection of a hot dike into a cooler magma body with a yield strength; (2) when magma crystallinity exceeds a critical value, 13 vol% plagioclase, the magma develops a yield strength; and (3) when total crystallinity exceeds 40 vol%, the magma has a penetrative crystal network and is effectively solid. Importantly, because the two magmas are of different compositions, their crystallinities and viscosities do not have the same variations with temperature. As the intruding magma cools, it crystallizes from the outside in, while simultaneously, host magma temperature near the intruder rises. Mixing of the two magmas begins when the host magma is heated sufficiently to (1) disrupt the crystal network and (2) initiate convection. If the shear stress exerted by the convecting host magma on the dike is greater than the yield strength of the dike margin (and dike crystallinity does not exceed 40 %), then fluid mixing occurs, otherwise enclaves form by brittle deformation of the dike. Application of the model to magma compositions representative of Lassen and Chaos Crags shows that emplacement of dikes <1 m thick should produce enclaves, whereas thicker dikes should generate fluid mixing and form banded pumice within days to weeks of emplacement. Similar relationships apply to other modeled magmatic systems, including Pinatubo, Unzen, and Ksudach/Shtuybel’ volcanoes. For all studied systems, the absolute size of the intruding dike, not just its proportion relative to the host, influences mixing style.