The origin of high δ<Superscript>18</Superscript>O zircons: marbles,megacrysts, and metamorphism

The oxygen isotope ratios (δ¹⁸O) of most igneous zircons range from 5 to 8‰, with 99% of published values from 1345 rocks below 10‰. Metamorphic zircons from quartzite, metapelite, metabasite, and eclogite record δ¹⁸O values from 5 to 17‰, with 99% below 15‰. However, zircons with anomalously high δ¹⁸O, up to 23‰, have been reported in detrital suites; source rocks for these unusual zircons have not been identified. We report data for zircons from Sri Lanka and Myanmar that constrain a metamorphic petrogenesis for anomalously high δ¹⁸O in zircon. A suite of 28 large detrital zircon megacrysts from Mogok (Myanmar) analyzed by laser fluorination yields δ¹⁸O from 9.4 to 25.5‰. The U–Pb standard, CZ3, a large detrital zircon megacryst from Sri Lanka, yields δ¹⁸O = 15.4 ± 0.1‰ (2 SE) by ion microprobe. A euhedral unzoned zircon in a thin section of Sri Lanka granulite facies calcite marble yields δ¹⁸O = 19.4‰ by ion microprobe and confirms a metamorphic petrogenesis of zircon in marble. Small oxygen isotope fractionations between zircon and most minerals require a high δ¹⁸O source for the high δ¹⁸O zircons. Predicted equilibrium values of Δ¹⁸O(calcite-zircon) = 2–3‰ from 800 to 600°C show that metamorphic zircon crystallizing in a high δ¹⁸O marble will have high δ¹⁸O. The high δ¹⁸O zircons (>15‰) from both Sri Lanka and Mogok overlap the values of primary marine carbonates, and marbles are known detrital gemstone sources in both localities. The high δ¹⁸O zircons are thus metamorphic; the 15–25‰ zircon values are consistent with a marble origin in a rock-dominated system (i.e., low fluid_(external)/rock); the lower δ¹⁸O zircon values (9–15‰) are consistent with an origin in an external fluid-dominated system, such as skarn derived from marble, although many non-metasomatized marbles also fall in this range of δ¹⁸O. High δ¹⁸O (>15‰) and the absence of zoning can thus be used as a tracer to identify a marble source for high δ¹⁸O detrital zircons; this recognition can aid provenance studies in complex metamorphic terranes where age determinations alone may not allow discrimination of coeval source rocks. Metamorphic zircon megacrysts have not been reported previously and appear to be associated with high-grade marble. Identification of high δ¹⁸O zircons can also aid geochronology studies that seek to date high-grade metamorphic events due to the ability to distinguish metamorphic from detrital zircons in marble.     

Testing the fidelity of thermometers at ultrahigh temperatures

A highly residual granulite facies rock (sample RG07‐21) from Lunnyj Island in the Rauer Group, East Antarctica, presents an opportunity to compare different approaches to constraining peak temperature in high‐grade metamorphic rocks. Sample RG07‐21 is a coarse‐grained pelitic migmatite composed of abundant garnet and orthopyroxene along with quartz, biotite, cordierite, and plagioclase with accessory rutile, ilmenite, zircon, and monazite. The inferred sequence of mineral growth is consistent with a clockwise pressure–temperature (P–T) evolution when compared with a forward model (P–T pseudosection) for the whole‐rock chemical composition. Peak metamorphic conditions are estimated at 9 ± 0.5 kbar and 910 ± 50°C based on conventional Al‐in‐orthopyroxene thermobarometry, Zr‐in‐rutile thermometry, and calculated compositional isopleths. U–Pb ages from zircon rims and neocrystallized monazite grains yield ages of c. 514 Ma, suggesting that crystallization of both minerals occurred towards the end of the youngest pervasive metamorphic episode in the region known as the Prydz Tectonic Event. The rare earth element compositions of zircon and garnet are consistent with equilibrium growth of these minerals in the presence of melt. When comparing the thermometry methods used in this study, it is apparent that the Al‐in‐orthopyroxene thermobarometer provides the most reliable estimate of peak conditions. There is a strong textural correlation between the temperatures obtained using the Zr‐in‐rutile thermometer––maximum temperatures are recorded by a single rutile grain included within orthopyroxene, whereas other grains included in garnet, orthopyroxene, quartz, and biotite yield a range of temperatures down to 820°C. Ti‐in‐zircon thermometry returns significantly lower temperature estimates of 678–841°C. Estimates at the upper end of this range are consistent with growth of zircon from crystallizing melt at temperatures close to the elevated (H₂O undersaturated) solidus. Those estimates, significantly lower than the calculated temperature of this residual solidus, may reflect isolation of rutile from the effective equilibration volume leading to an activity of TiO₂ that is lower than the assumed value of unity.     

Late Dinantian palaeokarst of England and Wales: implications for exposure surface development

Palaeokarst is an important feature of late Dinantian exposure surfaces. Soil-filled depressions are widely developed. These are comparable to modern day solution dolines and were probably interspersed by areas of relatively bare limestone pavement. The palaeokarst primarily exhibits a smooth, mamillated to potholed surface form, consistent with its formation beneath a soil cover. Areas between the depressions have been extensively stylolitised and would likely have originally been characterized by small-scale fretted and sculpted karren forms typical of subaerial karstification. Palaeokarst pits making up the depressions are thought to have been initiated through stem-flow drainage from trees. Rain water, intercepted by the crown of the tree, was concentrated at specific sites on the emergent surface and dissolution beneath the trunk produced cylindrical pits that propagated vertically downwards. Trees responsible for concentrating drainage may also have enhanced the acidic nature of the rain water through leaching of organic acids from foliar and woody tissues. Downward propagation of the pits was limited to the uppermost 1–2 m and enlargement primarily occurred through lateral amalgamation of adjacent pits. Once initiated, continued development of the depressions would have been self perpetuating; the preferential accumulation of volcanic ash and organic matter enhancing water retention and encouraging further vegetation growth. In contrast, intervening areas would have been characterized by slow vertical denudation only. Karstification likely took of the order of a few hundred years in the case of potholed palaeokarstic surfaces formed solely by stem-flow drainage, to a few tens of thousands of years where the palaeokarst is more mature.     

Description of an aerodynamic levitation apparatus with applications in Earth sciences

Background  

In aerodynamic levitation, solids and liquids are floated in a vertical gas stream. In combination with CO₂-laser heating, containerless melting at high temperature of oxides and silicates is possible. We apply aerodynamic levitation to bulk rocks in preparation for microchemical analyses, and for evaporation and reduction experiments.     

The formation of headland/island sandbanks

There are four extensive sandbanks in the vicinity of the Isle of Portland, a headland in the English Channel. The formation and maintenance of the two most prominent of these sandbanks (one on either side of the headland) can largely be explained by net bedload convergence, driven by instantaneous headland eddies generated by tidal flow past the headland. However, there are also two less prominent sandbanks (again, one on either side of the headland), which are not located in zones of bedload convergence. It is suggested here that these latter two sandbanks were formed when the Isle of Portland was isolated from the mainland by a tidal strait. Relative sea-level data and radiocarbon dates indicate that this would have occurred ca. 9–7 ka BP, prior to the closure of the strait by sedimentation. Tidal flow through this strait generated eddy systems in addition to the headland eddies, leading to the formation of associated headland/island sandbanks. At 7 ka BP, sedimentation resulted in closure of the strait, leading to the present-day headland configuration, and subsequent reworking of these now moribund sandbanks formed by the strait. A series of idealised morphological model experiments, parameterised using bedrock depths and glacial isostatic adjustment model output of relative sea level, are here used to simulate this hypothesised sequence of sandbank evolution over the Holocene. The results of the model experiments are corroborated by in situ observations of bedforms and sediment characteristics, and by acoustic Doppler current profiler (ADCP) data applied to predictions of bedload transport over the sandbanks. In addition to demonstrating the mechanism which leads to the formation of sandbanks by tidal flow through a strait, the model results show that upon subsequent closure of such a strait, these sandbanks will no longer be actively maintained, in contrast to sandbanks which are continuously maintained by headland eddies.     

Reduction in Exhaust Gas Temperature of Biodiesel Fueled Engine by Exhaust Gas Recirculation

Biodiesel is a renewable alternative fuel that can be used as substitute for mineral diesel. The use of biodiesel in diesel engines reduces all of the exhaust emissions expect NO_x. The higher temperature in the combustion chamber increases the NO_x emissions. The recirculation of a small percentage of cooled exhaust gases into the combustion chamber through the intake manifold reduces the in‐cylinder temperature. Moreover, the cooling of exhaust gases before mixing with fresh air introduced to the engine does not affect its volumetric efficiency but it absorbs the heat of combustion. This leads to a reduction in NO_x emissions and improves the engine brake thermal efficiency. This paper describes the investigation of the performance and emission characteristics of a biodiesel‐fueled, naturally aspirated, single cylinder diesel engine with cooled exhaust gas recirculation.     

The public perception of carbon dioxide capture and storage in the UK: results from focus groups and a survey

Abstract

A series of meetings of two ‘Citizen Panels’ were held to explore public perceptions of off-shore carbon dioxide (CO₂) capture and storage (CCS). In addition, a face-to-face survey of 212 randomly selected individuals was conducted. We found that, on first hearing about CCS in the absence of any information on its purpose, the majority of people either do not have an opinion at all or have a somewhat negative perspective. However, when (even limited) information is provided on the role of CO₂ storage in reducing CO₂ emissions to the atmosphere, opinion shifts towards expressing slight support for the concept.

Support depends, however, upon concern about human-caused climate change, plus recognition of the need for major reductions in CO₂ emissions. It also depends upon CCS being seen as just one part of a wider strategy for achieving significant cuts in CO₂ emissions. A portfolio including renewable energy technologies, energy efficiency, and lifestyle change to reduce demand was generally favoured. CCS can be part of such a portfolio, but wind, wave, tidal, solar and energy efficiency were preferred. It was felt that uncertainties concerning the potential risks of CCS had to be better addressed and reduced; in particular the risks of accidents and leakage (including the potential environmental, ecosystem and human health impacts which might result from leakage).     

Ultraviolet absorption cross-sections of chloro and chlorofluoro-methanes at stratospheric temperatures

Absorption cross-sections of nine halomethanes (CCl₄, CHCl₃, CH₂Cl₂, CH₃Cl, CFCl₃, CF₂Cl₂, CF₃Cl, CHFCl₂, and CHF₂Cl), measured between 174 and 250 nm for temperatures ranging from 225 to 295 K, are presented with uncertainties ranging from 2 to 4% and compared with previous determinations made for comparable temperature ranges.The largest temperature effect which takes place near the absorption threshold, decreases the absorption cross-section up to 50% for highly chlorinated methanes, but is negligible for molecules highly stabilized by hydrogen and/or fluorine. Extrapolated values for temperatures of aeronomical interest are presented, as well as parametrical formulas which give absorption cross-section values for given wavelength and temperature ranges.     

Interpreting a Pumping Test Influenced by Another Well in an Anisotropic Aquifer

In confined aquifers the influence of neighboring active wells is often neglected when interpreting a pumping test. This can, however, lead to an erroneous interpretation of the pumping test data. This article presents simple methods to evaluate the transmissivity tensor and storativity of an anisotropic confined aquifer when there is an interfering well in the neighborhood of the tested well. Two methods have been developed depending on whether the tested well or the interfering well is the first in operation. These new methods yield better estimates of the hydraulic parameters than when the influence of the interfering well is neglected. These methods have then been used on data obtained from numerical models with an interfering well and the results have been compared to an analytical method that neglects the influence of the interfering well. The methods require knowledge of the pumping rate of the interfering well and the time elapsed since the pumping started in each well. If the interfering well started pumping before the tested well, the method does not require knowledge of the aquifer piezometric level at the beginning of the test, which is often unknown in this case. As for the method without interference, at least three monitoring wells (MWs) are needed, the position of which influences the accuracy of the estimated parameters. Some recommendations concerning MWs position have been given to get more accurate results according to the sought parameter.