Numerical modeling of the nocturnal urban boundary layer

A numerical case study with a second-order turbulence closure model is proposed to study the role of urban canopy layer (UCL) for the formation of the nocturnal urban boundary layer (UBL). The turbulent diffusion coefficient was determined from an algebraic stress model. The concept of urban building surface area density is proposed to represent the UCL. Calculated results were also compared with field observation data. The height of the elevated inversion above an urban center was simulated and found to be approximately twice the average building height. The turbulent kinetic energy k, energy dissipation rate , and turbulence intensities u ² and w ² increase rapidly at the upwind edge of the urban area. The Reynolds stress uw displayed a nearly uniform profile inside the UBL, and the vertical sensible heat flux w had a negative value at the inversion base height. This indicates that the downward transport of sensible heat from the inversion base may play an important role in the formation of the nocturnal UBL.     

Magma discharge variations during the 2011 eruptions of Shinmoe-dake volcano, Japan, revealed by geodetic and satellite observations

We present precise geodetic and satellite observation-based estimations of the erupted volume and discharge rate of magma during the 2011 eruptions of Kirishima-Shinmoe-dake volcano, Japan. During these events, the type and intensity of eruption drastically changed within a week, with three major sub-Plinian eruptions on January 26 and 27, and a continuous lava extrusion from January 29 to 31. In response to each eruptive event, borehole-type tiltmeters detected deflation of a magma chamber caused by migration of magma to the surface. These measurements enabled us to estimate the geodetic volume change in the magma chamber caused by each eruptive event. Erupted volumes and discharge rates were constrained during lava extrusion using synthetic aperture radar satellite imaging of lava accumulation inside the summit crater. Combining the geodetic volume change and the volume of lava extrusion enabled the determination of the erupted volume and discharge rate during each sub-Plinian event. These precise estimates provide important information about magma storage conditions in magma chambers and eruption column dynamics, and indicate that the Shinmoe-dake eruptions occurred in a critical state between explosive and effusive eruption.     

A 3D magnetic structure of Izu-Oshima Volcano and their changes after the eruption in 1986 as estimated from repeated airborne magnetic surveys

A 3D magnetic inversion method using a conjugate gradient method (CG method) was developed for constructing 3D magnetization models of a volcanic edifice and applied to aeromagnetic anomalies of Izu-Oshima Volcano surveyed in 1986 and in 1997. The calculated results of the 1986 data show that the volcanic edifice of Izu-Oshima Volcano has a mean magnetization intensity ranging from 10.4 to 12.1 A/m. The derived 3D magnetic structure shows low magnetization zones beneath the west-northwest of the western caldera rim, beneath the west-southwest of Mt. Mihara and beneath Mt. Shiroishi. These features may be related with demagnetizations, reflecting a high thermal state due to magma activities in the 1986 eruption. The comparison between 3D magnetization models in 1986 and in 1997, indicates meaningful changes beneath the C-craters erupted in 1986, suggesting a recovery process of demagnetizations and a considerable decrease of magnetization intensities in the foot of Mt. Futago, indicative of demagnetizations. A derived magnetization model including Izu-Oshima Volcano and its surrounding sea areas clarifies the submerged volcanic edifices around Izu-Oshima Island, and suggests that the old volcanic edifices of Fudeshima, Gyojyanoiwaya, and Okata Volcanoes have been affected by eastward migrations due to massive intrusions of a dike-like structure inferred at the base of Izu-Oshima Volcano.     

Microphenocrystic pyrrhotite from dacite rocks of Satsuma-Iwojima,southwest Kyushu,Japan and the solubility of sulfur in dacite magma

Microphenocrystic pyrrhotites were observed in the glassy groundmass of two dacite rocks from Satsuma-Iwojima, southwest Kyushu, Japan. It suggests that the dacite magma was saturated with respect to pyrrhotite at the time of eruption, and thus the sulfur contents in the groundmass can be taken as the solubility of sulfur in the dacite magma. The solubility of sulfur in the dacite rocks thus calculated is 65 to 72 ppm sulfur at the estimated conditions of T=900±50°C, and atm.     

The 2000 April multiwavelength campaign of GRS 1915+105

We report results from multiwavelength observations of the microquasarGRS 1915+105 performed during the 2000 April campaign. This is one ofthe biggest campaigns ever made for this source covering the broadband from radio to γ-rays. Multiwavelength light curves compiledfrom all the data reduced up to date and broad band spectra obtainedwith ASCA and RXTE are presented.     

Dynamics of microphytobenthic biomass in a coastal area of western Seto Inland Sea, Japan

This study focused on the causes of the variation in microphytobenthic biomass and the effects of this variation on macrobenthic animals in the western Seto Inland Sea, Japan, where the importance of microphytobenthos as the primary food source for benthic animals has been recently reported. We investigated the microphytobenthic biomass together with light attenuation of seawater, phytoplanktonic biomass, macrobenthic density and biomass at eight stations (water depth = 5–15 m) during four cruises in 1999–2000. The increased light attenuation coefficient of the water column associated with increased concentration of the phytoplanktonic Chl-a caused a decrease in light flux that reached the seafloor. The biomass of the microphytobenthos within the upper 1 cm of the sediment, 1.9–46.5 mg Chl-a m⁻², was inversely correlated with the phytoplanktonic biomass in the overlying water column, 10.9–65.0 mg Chl-a m⁻². Thus, interception of light by phytoplankton is considered to be a main cause of the variation in the microphytobenthic biomass. The microphytobenthos biomass showed a significant positive correlation with the macrobenthic density (78–9369 ind. m⁻²) and biomass (0.4–78.8 gWW m⁻²). It appears that the increase in oxygen production by the microphytobenthos allowed macrobenthic animals to become more abundant, as a consequence of oxygenation of the organically enriched muddy sediments (14.5 ± 2.69 mg TOC g⁻¹). This study suggests that the variation in the microphytobenthic biomass is influenced by the phytoplanktonic biomass due to shading effect, and the balance between these two functional groups might affect the variability in the macrobenthic density and biomass.     

Field measurements of absolute gravity in East Antarctica

Abstract This paper reports the results of field-based absolute gravity measurements aimed at detecting gravity change and crustal displacement caused by glacial isostatic adjustment. The project was initiated within the framework of the 53rd Japanese Antarctic Research Expedition （JARE53）. Absolute gravity measurements, together with GPS measurements, were planned at several outcrops along the Prince Olav Coast and S6ya Coast of East Antarctica, including at Syowa Station. Since the icebreaker Shirase （AGB 5003） was unable to moor alongside Syowa Station, operations were somewhat restricted during JARE53. However, despite this setback, we were able to complete measurements at two sites： Syowa Station and Langhovde. The absolute gravity value at the Syowa Station IAGBN （A） site, observed using an FG-5 absolute gravimeter （serial number 210; FG-5 #210）, was 982 524 322.7＋0.1 ktGal, and the gravity change rate at the beginning of 2012 was -0.26 gGal.a-1. An absolute gravity value of 982 535 584.2~0.7 ktGal was obtained using a portable A-10 absolute gravimeter （serial number 017; A-10 #017） at the newly located site AGS01 in Langhovde.     

Concentrations and isotope ratios of carbon,nitrogen and sulfur in ocean-floor basalts

Fresh submarine basalt glasses from Galapagos Ridge, FAMOUS area, Cayman Trough and Kilauea east rift contain 22 to 160 ppm carbon and 0.3 to 2.8 ppm nitrogen, respectively, as the sums of dissolved species and vesicle-filling gases (CO₂ and N₂). The large range of variation in carbon content is due to combined effect of depth-dependency of the solubility of carbon in basalt melt and varying extents of vapour loss during magma emplacement as well as in sample crushing. The isotopic ratios of indigenous carbon and nitrogen are in very narrow ranges,?6.2 ± 0.2% relative to PDB and +0.2 ± 0.6 %. relative to atmospheric nitrogen, respectively. In basalt samples from Juan de Fuca Ridge, however, isotopically light carbon (δ¹³C = around ?24%.) predominates over the indigenous carbon; no indigenous heavy carbon was found. Except for Galapagos Ridge samples, these ocean-floor basalts contain 670 to 1100 ppm sulfur, averaging 810 ppm, in the form of both sulfide and sulfate, whereas basalts from Galapagos Ridge are higher in both sulfur (1490 and 1570 ppm) and iron (11.08% total iron as FeO). The δ³⁴S values average +0.3 ± 0.5%. with average fractionation factor between sulfate and sulfide of +7.4 ± 1.6%.. The sulfate/sulfide ratios tend to increase with increasing water content of basalt, probably because the oxygen fugacity increases with increasing water content in basalt melt.     

A preliminary report of development of high resolution phase shift interferometry for the assessment of nuclear waster disposal

A newly designed phase-shift interferometer and a reaction cell have been developed to investigate the alteration process and the safety assessment of an artificial barrier and the surrounding rocks during interaction with high pH solutions in repository sites.We advanced a conventional interferometer with a laser to a phase-shift interferometer with a white-light. Developments and evaluations were also made on the reaction cells at high temperature, high pressure and high pH conditions. Potentials of our established system, involving a newly equipped image-processing, were practically tested by dissolution experiments on calcite in various aqueous solutions. It was successfully confirmed that the developed phase-shift interferometer system can detect very slow retreat in short-periods with high enough precision to evaluate the dissolution kinetics.     

A mechanical model for elastomeric seismic isolation bearings including the influence of axial load

For the purpose of predicting the large‐displacement response of seismically isolated buildings, an analytical model for elastomeric isolation bearings is proposed. The model comprises shear and axial springs and a series of axial springs at the top and bottom boundaries. The properties of elastomeric bearings vary with the imposed vertical load. At large shear deformations, elastomeric bearings exhibit stiffening behavior under low axial stress and buckling under high axial stress. These properties depend on the interaction between the shear and axial forces. The proposed model includes interaction between shear and axial forces, nonlinear hysteresis, and dependence on axial stress. To confirm the validity of the model, analyses are performed for actual static loading tests of lead–rubber isolation bearings. The results of analyses using the new model show very good agreement with the experimental results. Seismic response analyses with the new model are also conducted to demonstrate the behavior of isolated buildings under severe earthquake excitations. The results obtained from the analyses with the new model differ in some cases from those given by existing models. Copyright © 2008 John Wiley & Sons, Ltd.