Evolution of spinel–pyroxene symplectite in spinel–lherzolites from the Horoman Complex,Japan

We examined the textural and geochemical characteristics of spinel-pyroxene symplectites in spinel-lherzolites collected from the lowest, middle, and upper parts (LZ1, MZ, and UZ1, respectively) of the Horoman Peridotite Complex, Japan. The modal proportion of the minerals within symplectite is almost the same, i.e., orthopyroxene:clinopyroxene:spinel = 2:1:1. The size of the symplectite minerals increases from the lowest through to the middle to the upper parts in the complex. The reconstructed major element composition of the bulk symplectites is intermediate between pyrope-rich garnet and olivine. The model garnet compositions of the LZ1satisfies garnet stoichiometry and those of the MZ and UZ1 are not consistent with garnet stoichiometry. The primitive mantle-normalized pattern in trace elements for the LZ1 symplectite is similar to that of pyrope-rich garnet from fertile peridotites, particularly in its enrichment of HREE and a positive Zr anomaly. Thus, the LZ1 symplectite has inherited both major and trace element signatures from pre-existing garnet whereas the compositions of the MZ and UZ1 symplectites were modified during and/or after breakdown of pre-existing garnet. Geochemical and textural variations of symplectites might basically correspond to temperature differences within the complex during upwelling of the Horoman Complex. The basal part of the complex (LZ1) experienced the lowest temperature decompression path in the complex, which resulted in less textural and chemical modification. On the other hand, the higher part of the complex (UZ1) experienced a relatively higher temperature decompression path than other parts of the complex, resulting in chemical equilibration among the constituent minerals and coarsening of the symplectite minerals. Selective enrichment of Sr and LREE in the symplectite may indicate that the metasomatism by a Sr- and LREE-rich melt/fluid occurred during and/or after the formation of symplectite.     

Growth and mortality of larval and juvenile Japanese seaperch Lateolabrax japonicus in relation to seasonal changes in temperature and prey abundance in the Chikugo estuary

Japanese seaperch Lateolabrax japonicus migrate from Ariake Bay to the estuarine turbidity maximum (ETM) zone of the Chikugo River and inhabit there through the post-migration period (15–20 mm in standard length). The feeding, growth and mortality during the post-migration period of Japanese seaperch were analyzed in relation to seasonal changes in temperature and prey concentration. Larvae and juveniles were collected from ten sampling stations at 4–7 day intervals from 24 February to 24 April 2005 in the Chikugo estuary. Based on the otolith microstructure analysis the sampled fish were divided into nine cohorts, each cohort covering a 5 day hatch date period (22 December 2004 to 4 February 2005). The growth coefficient (G, day⁻¹) was higher and the mortality coefficient (M, day⁻¹) was lower in the later cohorts. The ratio of G to M as an index of stage-specific survival during the post-migration period significantly increased as the season progressed and exceeded 1.0 in the last cohort examined. Variability in abundance of the major prey organism, Sinocalanus sinensis, had a significant effect on the Japanese seaperch ingestion rate. Increase in temperature and spring bloom of S. sinensis is concluded to provide the later cohorts with a higher survival probability through increasing ingestion and growth rates during their post-migration period in spring 2005.     

Cloning of cytochrome P450 1A (CYP1A) genes from the hermaphrodite fish Rivulus marmoratus and the Japanese medaka Oryzias latipes

To use two small fish Rivulus marmoratus (Cyprinodontiformes, Rivulidae) and the Japanese medaka Oryzias latipes (Belloniformes) as testing models in molecular ecotoxicology, we have cloned the cytochrome P450 1A (CYP1A) gene after screening of both genomic DNA libraries, and sequenced 11,863 and 7,243 bp including all the exons and introns with promoter regions, respectively. The Rivulus and the medaka CYP1A gene consisted of seven exons (including non-coding exons) with high homology to mammals. In the promoter region, Rivulus CYP1A gene has seven xenobiotic response elements (XREs) and two metal response elements (MREs), while the Japanese medaka CYP1A gene has six XREs and four MREs. Interestingly, medaka CYP1A gene has a number of MREs at the promoter, which may affect its response on metal exposure. We describe here the gene structure of both fish CYP1A genes.     

Observation of temperature and velocity from a surface buoy moored in the Shikoku Basin (OMLET-88) —An oceanic response to a Typhoon

A surface buoy was moored from 20 April to 2 November 1988 at 28°48 N and 135°01 E where the water depth was 4900 m to measure temperature and velocity in the upper 150 m. The Typhoon 8824 passed at 0300 (JST) on 8 October about 50 km north to the mooring station with a maximum wind speed of 43.5 m s^–1. The buoy was shifted about 30 km to southwest, and the instruments were damaged. The records of temperature at 0.5 m and velocity at 50 m were obtained. The inertial oscillation caused by the typhoon is described using the current record. The oscillation endured for about 20 days. Deep mixing and vertical, heart transport by the typhoon are discussed based on the data from the Ocean Data Buoy of the Japan Meteorological Agency moored at 29°N and 135°E.     

Constraints on dissipation in the deep interiors of Ganymede and Europa from tidal phase-lags

Jupiter’s satellites are subject to strong tidal forces which result in variations of the gravitational potential and deformations of the satellites’ surfaces on the diurnal tidal cycle. Such variations are described by the Love numbers \(k_2\) and \(h_2\) for the tide-induced potential variation due to internal mass redistribution and the radial surface displacement, respectively. The phase-lags \( \phi _{k_2}\) and \( \phi _{h_2}\) of these complex numbers contain information about the rheological and dissipative states of the satellites. Starting from interior structure models and assuming a Maxwell rheology to compute the tidal deformation, we calculate the phase-lags in application to Ganymede and Europa. For both satellites we assume a decoupling of the outer ice-shell from the deep interior by a liquid subsurface water ocean. We show that, in this case, the phase-lag difference \(\varDelta \phi = \phi _{k_2}- \phi _{h_2}\) can provide information on the rheological and thermal state of the deep interiors if the viscosities of the deeper layers are small. In case of Ganymede, phase-lag differences can reach values of a few degrees for high-pressure ice viscosities \({<}10^{14}\) Pa s and would indicate a highly dissipative state of the deep interior. In this case \(\varDelta \phi \) is dominated by dissipation in the high-pressure ice layer rather than dissipation within the ice-I shell. These phase lags would be detectable from spacecraft in orbit around the satellite. For Europa \(\varDelta \phi \) could reach values exceeding \(20^\circ \) and phase-lag measurements could help distinguish between (1) a hot dissipative silicate mantle which would in thermal equilibrium correspond to a very thin outer ice-I shell and (2) a cold deep interior implying that dissipation would mainly occur in a thick (several tens of km) outer ice-I shell. These measurements are highly relevant for ESA’s Jupiter Icy Moons Explorer (JUICE) and NASA’s Europa Multiple Flyby Mission, both targeted for the Jupiter system.     

Molecular and isotopic composition of hydrate-bound and dissolved gases in the southern basin of Lake Baikal, based on an improved headspace gas method

Assessments of the molecular and isotopic composition of hydrate-bound and dissolved gases in pore water were conducted during the multi-phase gas hydrate project (MHP-09) cruise VER09-03 to the southern basin of Lake Baikal in September 2009. To avoid changes in gas composition during core sampling and transport, various headspace methods were investigated aimed at preserving the dissolved gases in pore water. When distilled water was added to the sediment samples, the concentrations of carbon dioxide and oxygen decreased because of dissolution into the water and/or microbial consumption. When the headspace was not flushed with inert gases, trace levels of hydrogen and ethylene were detected. The findings suggest that best preparation is achieved by flushing the headspace with helium, and adding a saturated aqueous solution of sodium chloride. This improved headspace method served to examine the molecular and isotopic compositions of gas samples retrieved at several new sites in the southern basin. Methane was the major component, and the proportion of ethane ranged widely from 0.0009 to 1.67?mol% of the total hydrocarbon gases. The proportions of propane and higher hydrocarbons were small or less than their detection limits. The carbon isotope signatures suggest that microbial-sourced methane and ethane were dominant in the Peschanka study area, whereas ethane was of thermogenic origin at all other study sites in the southern basin of Lake Baikal.     

Tectonic implication of Lower Cretaceous chromian spinel-bearing sandstones in Japan and Korea

Abstract In Japan and Korea, some Lower Cretaceous terrigenous clastic rocks yield detrital chromian spinels. These chromian spinels are divided into two groups: low-Ti and high-Ti. The Sanchu Group and the Yuno Formation in Japan have both groups, whereas the Nagashiba Formation in Japan and the Jinju Formation in Korea have only the low-Ti spinels. High-Ti spinels are thought to have originated in intraplate-type basalt. Low-Ti spinels (higher than 0.6 Cr#) were probably derived from peridotites, which are highly correlated with an arc setting derivation and possibly with a forearc setting derivation. Low-Ti spinels are seen in the Sanchu Group, the Nagashiba Formation and the Jinju Formation. Low-Ti spinels from the Yuno Formation are characterized by low Cr# (less than 0.6) and these chromian spinels appear to have been derived from oceanic mantle-type peridotite, including backarc. According to maps reconstructing the pre-Sea of Japan configuration of the Japanese Islands and the Korean Peninsula, the Korean Cretaceous basin was comparatively close to the Southwest Japan depositional basins. It is possible that these Lower Cretaceous systems were sediments mainly in the forearc and partly in the backarc regions. The peridotite might have infiltrated along major tectonic zones such as the Kurosegawa Tectonic Zone (= serpentinite melange zone) in which left lateral movement prevailed during the Early Cretaceous.     

DISTRIBUTION OF AEROSOL EXTINCTION IN THE LOWER TROPOSPHERE BY MICRO-PULSE LIDAR OBSERVATION

The profiles of aerosol extinction coefficients are investigated by micro-pulse lidar(MPL)combined with the meteorological data in the lower troposphere at Meteorological ResearchInstitute(MRI).Japan.Larger extinction values of aerosol are demonstrated in the nocturnalstable air layer with larger Richardson number,and light wind velocities are favorable for aerosolconcentrating in the planetary boundary layer(PBL).But aerosol extinction coefficients showlarger values over the altitudes of 2.0 to 5.0km where correspond to higher relative humidity(RH).The tops of PBL identified by the aerosol extinction profiles almost agree with ones byradiosonde data.The diurnal variations of aerosol extinction profiles are clearly displayed,intensive aerosol layers usually are formed over the period of mid-morning to 1400 Loeal Time(LT).then elapse in the cloudless late afternoon and nighttime.Thermal eonvection or turbulenttransport from the surfaee probably dominates these temporal and spatial changes of aerosoldistribution.     

A multi‐geochronological study of the Hakusan volcano,central Japan

The Hakusan volcano, central Japan, is located in a region where two subducting plates (the Pacific Plate and the Philippine Sea Plate) overlap near the junction of four plates adjacent to the Japanese Islands (the Pacific Plate, the Philippine Sea Plate, the Eurasia Plate, and the North American Plate). The Hakusan volcano consists of products from four major volcanic episodes: Kagamuro, Ko‐hakusan, and Shin‐Hakusan I and II. To date the eruption events of the Hakusan volcano we applied thermoluminescence and fission track methods. ²³⁸U(²³⁴U)–²³⁰Th disequilibrium and ²⁰⁶Pb/²³⁸U methods were applied to date the zircon crystallization ages for estimating the magma residence time before the eruptions. The eruption ages we obtained are ca 250 ka for Kagamuro, ca 100 ka and ca 60 ka for Ko‐Hakusan, ca 50 ka for Shin‐Hakusan I, and <10 ka for Shin‐Hakusan II. They are concordant with previous reports based on K–Ar dating. Some of the pyroclastic rocks, possibly originating from Shin‐Hakusan II activities, are dated to be ca 36 ka or 50 ka, and belong to the Shin‐Hakusan I activity. The zircon crystallization ages show several clusters prior to eruption. The magma residence time was estimated for each volcanic activity by comparing the major crystallization events and eruption ages, and we found a gradual decrease from ca. 500 ky for the Kagamuro activity to ca. 5 ky for the Shin‐Hakusan II activity. This decrease in residence time may be responsible for the decrease in volume of erupted material estimated from the current topography of the region. The scale of volcanic activity, which was deduced from the number of crystallized zircons, is more or less constant throughout the Hakusan volcanic activity. Therefore, the decrease in magma residence time is most likely the result of stress field change.     

Tidal switch on metabolic activity: Salinity induced responses on bacterioplankton metabolic capabilities in a tropical estuary

“Biolog” plates were used to study the changes in the metabolic capabilities of bacterioplankton over a complete tidal cycle in a tropical ecosystem (Cochin Estuary) along southwest coast of India. The pattern of utilization of carbon sources showed a definite shift in the community metabolism along a salinity gradient. Multivariate statistical analysis revealed two communities, namely allochthonous bacterioplankton sensitive to salinity and autochthonous bacterioplankton, which are tolerant to wide salinity fluctuations. Regression analysis showed salinity as the most important parameter influencing the physiological profile of bacterioplankton, irrespective of tide. Apart from salinity, limno-tolerant retrievable counts and halo-tolerant retrievable counts also accounted for the metabolic variation of bacterioplankton during low and high tides, respectively. The shift in the substrate utilization from carbohydrates to amino acids appears to be due to the physiological adaptation or nitrogen limitation of bacterial community with increasing salinity.