10Be dating of North Pacific sediment cores up to 2.5 million years B.P.

The¹⁰Be method of dating of marine sediment cores is applied to five North Pacific cores. Assuming a constant¹⁰Be precipitation rate and varying sedimentation rates with time during the past 2.5 m.y. dating confirms to that obtained from paleomagnetic stratigraphy. The¹⁰Be concentration variations with depth in the cores are primarily due to changes in sediment dilution and do not reflect cosmic ray intensity or global climate variations. The limits of¹⁰Be deposition rate variation in the investigated cores are less than ± 10% for periods of (2–7) × 10⁵ years and less than ±30% for periods of 1 × 10⁵ years. The data set gives a half-life of¹⁰Be is 1.50 × 10⁶ years. The latitudinal effect of¹⁰Be concentrations and¹⁰Be/⁹Be ratios relates to a frequency of particulate matter occurrence (detrital and biological particles) in the oceans and to oceanic circulation.     

10Be in marine sediments

The depth profile of the long-lived radionuclide¹⁰Be in a marine sediment recovered in the vicinity of the Samoan Islands has been precisely assayed with a highly sensitive needle-type gas counter. The obtained irregular pattern of¹⁰Be concentrations with depths ranging from 4.7 to 0.3 dpm/kg dry sediment is interpreted as being due to dilution of¹⁰Be by volcanic eruptions in the past.     

Solar vector magnetograms of the Okayama Astrophysical Observatory

The title instrument is mounted on the 65 cm solar Coudé telescope at the Okayama observatory. Observation is usually of the Fei 5250 Å line. The data obtained are briefly described.Paper presented at the IAU Third Asian-Pacific Regional Meeting, held in Kyoto, Japan, between 30 September–6 October, 1984.     

Propagation of hydromagnetic disturbances in the solar corona and Moreton's wave phenomenon

Moreton's wave phenomenon, observed to propagate across the solar disk during certain solar flares, may be explained as the intersection line between an expanding coronal wavefront surface and the chromosphere: The propagation of a hydromagnetic disturbance in a spherically symmetric model corona with a radial magnetic field is studied in the WKB-approximation, and the propagation paths of wavepackets, the shape of the wavefronts expanding in time, and the variation of the direction of material oscillation along the paths are discussed for disturbances in hydromagnetic wave modes. It is shown that the wavefront expanding in fast-mode in the corona has a circular intersection line with the chromosphere, which sweeps on the solar surface with a velocity and a direction of material oscillation just favorable for explaining the observed features of the phenomenon.     

Intermittent Bursting of Turbulence in a Stable Boundary Layer with Low-level Jet

The atmospheric stable boundary layer (SBL) with a low-level jet is simulated experimentally using a thermally stratified wind tunnel. The turbulence structure and flow characteristics are investigated by simultaneous measurements of velocity and temperature fluctuations and by flow visualization. Attention is focused on the effect of strong wind shear due to a low-level jet on stratified boundary layers with strong stability. Occasional bursting of turbulence in the lower portion of the boundary layer can be found in the SBL with strong stability. This bursting originates aloft away from the surface and transports fluid with relatively low velocity and temperature upward and fluid with relatively high velocity and temperature downward. Furthermore, the relationship between the occurrence of turbulence bursting and the local gradient Richardson number (Ri) is investigated. The Ri becomes larger than the critical Ri, Ri_cr = 0.25, in quiescent periods. On the other hand, the Ri number becomes smaller than Ri_cr during bursting events.     

Current Nature of the Kuroshio in the Vicinity of the Kii Peninsula

The Kuroshio flows very close to Cape Shionomisaki when it takes a straight path. The detailed observations of the Kuroshio were made both on board the R/V Seisui-maru of Mie University and on board the R/V Wakayama of the Wakayama Prefectural Fisheries Experimental Station on June 11–14, 1996. It was confirmed that the current zone of the Kuroshio touches the coast and bottom slope just off Cape Shionomiaki, and that the coastal water to the east of the cape was completely separated from that to the west. The relatively high sea level difference between Kushimoto and Uragami could be caused by this separation of the coastal waters when the Kuroshio takes a straight path. This flow is rather curious, as the geostrophic flow, which has a barotropic nature and touches the bottom, would be constrained to follow bottom contours due to the vorticity conservation law. The reason why the Kuroshio leaves the bottom slope to the east of Cape Shionomisaki is attributed to the high curvature of the bottom contours there: if the current were to follow the contours, the centrifugal term in the equation of motion would become large and comparablee to the Coriolis (or pressure gradient) term, and the geostrophic balance would be destroyed. This creates a current-shadow zone just to the east of the cape. As the reason why the current zone of the Kuroshio intrudes into the coastal region to the west of the cape, it is suggested that the Kii Bifurcation Current off the southwest coast of the Kii Peninsula, which is usually found when the Kuroshio takes the straight path, has the effect of drawing the Kuroshio water into the coastal region. The sea level difference between Kushimoto and Uragami is often used to monitor the flow pattern of the Kuroshio near the Kii Peninsula. It should be noted that Uragami is located in the current shadow zone, while Kushimoto lies in the region where the offshore Kuroshio water intrudes into the coastal region. The resulting large sea level difference indicates that the Kuroshio is flowing along the straight path.     

Nonlinear behavior of high-damping rubber bearings under horizontal bidirectional loading: full-scale tests and analytical modeling

Horizontal bidirectional loading tests are conducted for real-sized high-damping rubber (HDR) bearings with diameters of 700 mm (HDR700) and 1300 mm (HDR1300). The hysteresis loops of these bearings under bidirectional horizontal loadings are compared with those under unidirectional loadings. The results show that the bearing force measurement in the primary direction of loading increases when there is displacement in the orthogonal direction. Unusually, the maximum restoring force in the orthogonal direction to the primary loading direction occurs near zero displacement. On the basis of the observations of the restoring forces, a rate-independent model is proposed. This model simulates well the test results under both bidirectional loading and unidirectional loading. It can reproduce the irregular restoring forces characteristics around zero displacement as described above. Bidirectional loading induced twist deformation in the HDR bearings that increased local shear strains. This phenomenon results in an early failure as observed in HDR700. The additional shear strain is estimated based on the twist deformation measured by video image analysis. The comparison of the nominal total shear stress demonstrates that the increase of shear stress because of bidirectional loading occurs when the average shear strain is larger than about 200%. The larger the shear strain, the greater the bidirectional effect. It is shown that the nominal total shear stress of average strain of 350% under bidirectional circular loading pattern is approximately the same as the average shear strain of 400% under unidirectional loading. This means that the average shear strain of 350% under a bidirectional circular loading corresponds to a local shear strain of 400%. Copyright © 2012 John Wiley & Sons, Ltd.     

Seismic radiation from dynamic coalescence, and the reconstruction of dynamic source parameters on a planar fault

The dynamic coalescence of two mode II cracks on a planar fault is simulated here using the elastodynamic boundary integral equation method. We focus on the complexity of the resultant slip rate and seismic radiation in the crack coalescence model (CCM) and on the reconstruction of a single crack model (SCM) that can reproduce the CCM waveforms from heterogeneous source parameters rather than coalescence. Simulation results reveal that localized higher slip rates are generated by coalescence as a result of stress interaction between the approaching crack tips. The synthesized seismic radiation exhibits a distinct coalescence phase that has striking similarities to stopping phases in the radiation and propagation properties. The corresponding SCM yields a singular increase in the stress drop distribution, which is accompanied by a sudden decrease in it across the point of coalescence in the CCM. This implies that the generation of high-frequency radiation is more efficient from coalescence than from stopping, although both phenomena exhibit the same strong  ω⁻²  -type displacement spectra.