逆断层地震近场地震动影响场和地表形变模拟

本文设计了一个MW7.0级地震的简单的逆断层有限移动源破裂模型,计算了断层周围64个观测点的加速度、速度和位移时程及峰值,简单讨论了近场地震动峰值、断层附近地表永久位移(或地表形变)的分布特点,并讨论了永久位移和地面运动速度大脉冲的关系。重点研究了断层附近三分量的永久位移(或地表形变)大小、方向和地震动作用特点。     

跨越断层埋地管线地震反应数值分析

跨越断层埋地管线在地震中的破坏是非常严重的,地震本身和管土相互作用体系中都存在很多不确定性因素,所以管线在断层运动过程中反应比较复杂。本文利用有限元理论和数值模拟手段,建立了管土作用模型,采用非线性接触问题研究方法详细地分析了管线由断层运动而产生的反应,对影响管线的各种因素进行了分析,包括位错量、跨越角度、断层运动形式、埋设深度、初始轴向力、断层裂缝宽度、填覆土质和管径。通过研究,得到一些初步结论。     

立式储液罐地震破坏快速评估方法

本文采用大型有限元程序ANSYS对立式储液罐的地震反应进行了非线性数值分析,考虑了罐体和内部液体的相互作用,得到了3个不同容积的储罐,在不同峰值的地震动时程输入下的反应结果。结合地震灾害中立式储罐的地震破坏现象和特点,以及现有的立式储罐地震破坏预测方法,提出了立式储罐的地震破坏快速评估方法。     

基于能量原理的钢筋混凝土简体结构抗震性能研究

本文通过能量法研究了钢筋混凝土简体结构的抗震性能。文中采用振型分解法按等效单自由度体系求解简体结构的滞回输入能;用pushover法分析了滞回耗能在结构层间的分布规律及结构自身的耗能能力;根据楼层滞回耗能与弹塑性层间位移的关系求出了薄弱层的弹塑性位移。对一高层钢筋混凝土框架-简体结构在7度罕遇地震下的抗震性能进行了评估,通过与非线性动力时程分析的对比,证明了方法的可行性。     

郯庐断裂带安徽段现代地震活动及应力场特征

分析了郯庐断裂带安徽段地震活动特征,利用近震直达波最大振幅比方法反演了99次中-小地震震源机制,并作了统计和聚类分析。现代地震活动整体上继承了历史地震分布格局,未显示增强趋势;断裂带及邻区应力场P轴和T轴优势方位大致呈近东西向和近南北向分布,现今承受的作用力以近水平或斜向为主,但也存在部分其它方向的应力场和近垂直方向的作用力。震源断层的破裂类型,带内以逆冲(或正断),或近逆冲(或正断)型为主。带附近较明显地呈现出走滑型或近走滑型破裂的优势;北、南亚段应力场有明显差异,即北压南张,其分界大约在北纬32°附近,北西西走向的桥头集—东关断裂是两者间的构造变换带。     

游客-环境互动视角下旅游者目的地环境恢复性效应

日常生活环境和旅游目的地环境都可以为个体提供恢复的机会,不同环境的属性特征导致不同程度的恢复。为了探究环境类型与恢复性效应之间的关系及停留时间的调节作用,文章采用问卷调查方式,利用配对样本t检验和混合设计方差分析相结合的方法,探讨游客在不同环境中的恢复性效应,并对这一现象提供心理上的解释。结果表明：1）恢复体验的4个维度（放松体验、心理脱离、掌握体验、控制体验）在旅游目的地环境中的得分均高于日常生活环境。2）掌握和控制体验维度在城市旅游目的地中的变化程度高于乡村旅游目的地,两种类型目的地的放松和心理脱离维度差异较小。3）随着在目的地停留时间的延长,乡村旅游目的地放松体验和心理脱离维度变化程度高于城市旅游目的地,两种类型目的地环境恢复性效应会相互靠近。因此,游客的环境恢复性效应不仅受到环境和目的地类型的影响,同时还与游客的适应程度有关,且受到其停留时间的调节作用。     

胶州湾营养盐的现状和变化

报道了１９９１年５月至１９９４年２月１２个航次胶州湾ＮＯ３－Ｎ，ＮＯ２－Ｎ，ＮＨ４－Ｎ，ＰＯ４－Ｐ和ＳｉＯ３－Ｓｉ的时空分布基本特征，６０年代于至９０年代的变化表明，胶州湾营养盐的浓度和分布已发生显变化。尤其从６０年代至８０年代，３０年来，胶州湾中东部水城ＰＯ４－Ｐ，ＮＯ３－Ｎ和ＮＨ４－Ｎ浓度分别增加２．２，７．３和７．１倍，ＴＯＮ浓度也增加了３．５倍，ＴＩＮ／ＰＯ４－Ｐ从１０增加至２４．２；Ｔ     

DGPS在广西沿海海底地形测绘中的应用

DGPS（DifferentialGlobalPositioningSystem）测量技术即差分定位技术,包括实时差分和后处理差分定位技术,正在远海和近海测量中得到广泛应用。后处理差分定位与微波定位及GPS实时差分定位相比,具有作用距离远,不受基准台与船台之问的障碍物影响以及减少基准台等优点。对于近海大比例尺（大于1：1万）测量,可采用实时差分定位的方法,而小于1：1万中小比例尺海底地形图测绘及海上其他工程测量,采用后处理差分定位,既能满足精度要求,又能提高工作效率。本文主要介绍利用DGPS后处理定位方法,在测绘广西沿海1：5万海底地形图中的应用情况。     

Determining the age of water and long-term transport timescale of the Chesapeake Bay

The concept of age of water (AW) is applied to the Chesapeake Bay to investigate the long-term transport properties for dissolved substances. A real-time calibrated hydrodynamic Chesapeake Bay model in 3 Dimensions (CH3D), employing a boundary-fitted curvilinear grid, is used for the study. The long-term transport properties, represented by AW, are investigated under the conditions of low river inflow of 1995 and high river inflow of 1996, as well as for constant mean inflows. The influences of freshwater, density-induced circulation, and wind-induced transport on age distribution have been investigated. Model results show that river inflows, wind stress, and density-induced circulation play important roles in controlling the long-term transport in the Bay. The model results shows that it requires 120–300 days for a marked change in the characteristics of the pollutant source discharged into the Bay from the Susquehanna River to affect significantly the conditions near the mouth under different hydrodynamic conditions. An increase of river discharge results in increases of downstream residual current and gravitational circulation, and thus reduces AW. The density-induced circulation contributes to the transport substantially. The dissolved substances discharged into the Bay are transported out of the Bay more rapidly when the estuary becomes more stratified. Southeasterly and southwesterly winds have strong impacts on the transport compared to the northeasterly and northwesterly winds. The former increases lateral and vertical mixing significantly. Consequently, the gravitational circulation is reduced and the transport time is increased by 50%. The model results provide useful information for understanding the long-term transport processes in the Bay.     

Improving performances of ITO/GaP contact on AlGaInP light-emitting diodes

In this paper AlGaInP light emitting diodes with different types of electrodes: Au/Zn/Au-ITO Au/Ti-ITO Au/Ge/Ni-ITO and Au-ITO are fabricated. The photoelectricity properties of those LEDs are studied. The results show that the Au/Zn/Au electrode greatly improves the performance of LEDs compared with the other electrodes. Because the Au/Zn/Au electrode not only forms a good Ohmic contact with indium tin oxide (ITO), but also reduces the specific contact resistances between ITO and GaP, which are 1.273×10^-6 Ω · cm² and 1.743×10^-3 Ω ·cm² between Au/Zn/Au-ITO and ITO-GaP respectively. Furthermore, the textured Zn/Au-ITO/Zn electrode is designed to improve the performances of LEDs, reduce the forward-voltage of the LED from 1.93 to 1.88 V, and increase the luminous intensity of the LEDs from 126 to 134 mcd when driven at 20 mA.