Process-sedimentological challenges in distinguishing paleo-tsunami deposits

There has been a lively debate since the 1980s on distinguishing between paleo-tsunami deposits and paleo-cyclone deposits using sedimentological criteria. Tsunami waves not only cause erosion and deposition during inundation of coastlines in subaerial environments, but also trigger backwash flows in submarine environments. These incoming waves and outgoing flows emplace sediment in a wide range of environments, which include coastal lake, beach, marsh, lagoon, bay, open shelf, slope and basin. Holocene deposits of tsunami-related processes from these environments exhibit a multitude of physical, biological and geochemical features. These features include basal erosional surfaces, anomalously coarse sand layers, imbricated boulders, chaotic bedding, rip-up mud clasts, normal grading, inverse grading, landward-fining trend, horizontal planar laminae, cross-stratification, hummocky cross-stratification, massive sand rich in marine fossils, sand with high K, Mg and Na elemental concentrations and sand injections. These sedimentological features imply extreme variability in processes that include erosion, bed load (traction), lower flow regime currents, upper-flow regime currents, oscillatory flows, combined flows, bidirectional currents, mass emplacement, freezing en masse, settling from suspension and sand injection. The notion that a ??tsunami?? event represents a single (unique) depositional process is a myth. Although many sedimentary features are considered to be reliable criteria for recognizing potential paleo-tsunami deposits, similar features are also common in cyclone-induced deposits. At present, paleo-tsunami deposits cannot be distinguished from paleo-cyclone deposits using sedimentological features alone, without historical information. The future success of distinguishing paleo-tsunami deposits depends on the development of criteria based on systematic synthesis of copious modern examples worldwide and on the precise application of basic principles of process sedimentology.     

Hyperspectral Radiometry to Characterise Dunite Alteration and Magnesite Deposits of Salem,South India

This work reports the results of insitu surveys, hyperspectral-radiometry and geochemistry for dunite-alteration and magnesite mapping in the Salem, southern India. Spectral parameters such as the strength of absorption in the 865 nm and 2,300 nm range for Fe²⁺ and CO3^2- respectively, and the position of absorption trough were derived from the laboratory spectra for 13 samples. It is observed that dunite alteration and conversion to magnesite produce measurable changes in the VIS-NIR-SWIR spectra due to a transition from the silicate-dominated rocky composition to carbonate-dominated industrial mineral composition. Relationship between the spectra and mineralogy suggests that we can identify the varieties of magnesite using hyperspectral radiometry.     

Influence of environmental parameters on the distribution and diversity of molluscan composition in pondicherry mangroves,southeast coast of India

Seasonal variation in the distribution of mollusks in relation to environmental parameters was studied at four mangrove stations on the Pondicherry coast during September 2008–August 2009. A total of 37 species of molluscs were recorded, among them 16 species of bivalves belonging to 7 families and 12 Genera, and 21 species of gastropods belonging to 14 families and 19 Genera, with the Cereithedia cingulata being the dominant group. An increase of species density and diversity in the Post monsoon season was observed, with the highest values for both indexes at stations 1 and 2, and the lowest at stations 3 and 4 fine where the sand assemblage was dominated by a few gastropods. Pollution indicator species Cassidula nucleus, Melampus ceylonicus, Sphaerassiminea minuta were found only in highly polluted regions near stations 3 and 4; they were totally absent in moderately polluted areas near stations 1 and 2. From a stepwise multivariate analysis of the different environmental parameters regarding molluscan density, it was found that in all 10 parameters govern the density variation of benthic mollusks in Pondicherry mangroves and that the organic matter of sediment and sulphide, DO, and salinity were the highly significant ones.     

Assessment of genotoxic and humoral immune system alterations in silica exposed workers from pottery industries in South India

Chemicals, especially silica, have been suspected to cause genetic alterations in pottery industry workers. The present study aims to analyze the frequency of chromosomal aberrations (CA), micronucleus (MN) and DNA damage (comet assay) in the peripheral blood lymphocytes and the immunological alterations workers chronically exposed to silica and in control subjects. In our study, 50 silica exposed workers and 35 control subjects were recruited and silica level was measured by respirable dust and respirable quartz concentrations of badge dosimeter. The serum immunoglobulins (IgM, IgG, and IgA) of all the subjects were measured by using ELISA method. The individuals exposed to silica have a significant increase in the frequency of CA, MN and the total DNA damage (p < 0.05). Immunoglobulin elevation on silica exposed workers was statistically significant (p < 0.05) on comparison with their respective controls. Investigation of the smoking and alcohol habitats coupled with silica exposure in exposed and control subjects represents alcohol consumption and smoking as additional risk factors and must be avoided. Multiple linear regression analysis obtained for CA, MN and comet assay confirm these tests as biomarkers for silica exposed pottery workers. Some confounding factors also showed significant influence on exposed subjects. These results indicate the mutagenic risk in the working environment has a high probability of association with the silica dust exposure in pottery industries. Nevertheless, the present study will create awareness and public concern not only among the silica exposed workers but also to the welfare of their progeny.     

Changes in benthic macrofaunal assemblages in relation to bottom trawling in Cuddalore and Parangipettai coastal waters, Southeast coast of India

Variations in benthic biodiversity owing to bottom trawling were studied in the inshore waters of Parangipettai (Lat.11°24′N; Long. 79°464′E) and Cuddalore (Lat. 11°434′N; Long. 79°494′E), India from February 2009 to January 2010. Four stations each in Parangipettai and Cuddalore were prepared and established. A total of 114 species in Parangipettai and 101 in Cuddalore were found. The population density showed a maximum (10,387 no. m-2) in Parangipettai in the sample collected before trawling and a minimum (40no. m^?2) in Cuddalore in the samples collected after trawling. Among the faunal groups, polychaetes topped the list followed by other groups of organisms both in the samples before and after trawling. Shannon diversity varied from 2.23 to 4.24, 1.85 to 3.45; Margalef richness from 3.2 to 5.9, 2.57 to 4.25; Pielou’s evenness varied from 0.79 to 0.94, 0.81 to 0.88 in the samples collected before and after trawling respectively in Parangipettai. In Cuddalore waters, Shannon diversity ranged from 2.15 to 3.85, 1.92 to 3.15; Margalef richness from 2.95 to 5.2, 2.24 to 3.95 and Pielou’s evenness index from 0.84 to 0.91, 0.79 to 0.82 in the samples before and after trawling respectively. Multivariate methods also showed distinct variations in terms of species composition and abundance between regions and samples.     

Petrography and petrochemistry of the basalt sequences around mahape,Mumbra and Kalyan,Maharashtra, India

The volcanic sequences in three vertical sections (starting from m.s.l.) of the Deccan trap flows around Mahape, Mumbra and Kalyan have been demarcated into zones, mainly based on the megascopic texture and the degree of abundance of vesicles and amygdules. Petrographic, mineralogical and modal study of twelve samples indicate that the basalts are tholeiitic and are characterised by lateral inhomogeneities. Petrochemical data are suggestive of limited differentiation, a hyperferric iron enrichment, a Hawaiian trend and an affinity to alkalic and high-alumina basalt.     

Development of a hard x-ray focal plane compton polarimeter: a compact polarimetric configuration with scintillators and Si photomultipliers

X-ray polarization measurement of cosmic sources provides two unique parameters namely degree and angle of polarization which can probe the emission mechanism and geometry at close vicinity of the compact objects. Specifically, the hard X-ray polarimetry is more rewarding because the sources are expected to be intrinsically highly polarized at higher energies. With the successful implementation of Hard X-ray optics in NuSTAR, it is now feasible to conceive Compton polarimeters as focal plane detectors. Such a configuration is likely to provide sensitive polarization measurements in hard X-rays with a broad energy band. We are developing a focal plane hard X-ray Compton polarimeter consisting of a plastic scintillator as active scatterer surrounded by a cylindrical array of CsI(Tl) scintillators. The scatterer is 5 mm diameter and 100 mm long plastic scintillator (BC404) viewed by normal PMT. The photons scattered by the plastic scatterer are collected by a cylindrical array of 16 CsI(Tl) scintillators (5 mm × 5 mm × 150 mm) which are read by Si Photomultiplier (SiPM). Use of the new generation SiPMs ensures the compactness of the instrument which is essential for the design of focal plane detectors. The expected sensitivity of such polarimetric configuration and complete characterization of the plastic scatterer, specially at lower energies have been discussed in [11, 13]. In this paper, we characterize the CsI(Tl) absorbers coupled to SiPM. We also present the experimental results from the fully assembled configuration of the Compton polarimeter.     

An evaluation of inversion models for retrieval of inherent optical properties from ocean color in coastal and open sea waters around Korea

This study was aimed to investigate three inversion models (currently in use with Moderate Resolution Imaging Spectroradiometer and Sea-viewing Wide Field-of-view Sensor data processing), namely constrained Linear Matrix (LM), Quasi-analytical algorithm (QAA) and GSM semi-analytical models (GSM). These models were applied to large bio-optical data sets (collected from coastal and open sea waters around Korea) to retrieve inherent optical properties (IOPs) such as absorption coefficients of phytoplankton (a _ph ), colored dissolved and detrital organic matters (a _cdm ), and particulate backscattering coefficient (b _bp ) at five wavelengths (412, 443, 490, 510, and 555 nm). The derived IOP products were compared with in situ a _ph , a _cdm and b _bp coefficients measured for the same remote sensing reflectance (R _rs (λ)) data sets used in the models and the uncertainties of the three models were assessed based on the standard statistical procedures (mean relative error MRE, root mean square error RMSE, slope, and coefficient of determination R ²). It was found that all the three models tended to yield significant errors with varying magnitude at different wavelengths. Overall performance of the models assessed based on the above statistical means was found in the following order: LM > GSM > QAA for retrieving the a _ph , LM > GSM > QAA for retrieving the a _cdm , and QAA > GSM > LM for retrieving the b _bp . Our analyses suggest that these models will require additional refinements with a full parameterization by a fully suited data set in order to produce accurate retrievals of IOPs in coastal and open sea waters around Korea.