Digital mapping of riverine waterway hydrodynamic and geomorphic features

This paper proposes an innovative, non‐intrusive method for mapping waterway characteristics in riverine areas. The technique uses photogrammetry to provide quantitative information about the dry area in the vicinity of the waterways (banks and floodplain) and image processing algorithms to characterize the flow. Riverside images of a riverine area are decomposed into quasi‐planar areas and ortho‐rectified and re‐assembled to obtain a panoramic ortho‐view of the area of interest. Morphological features of interest (such as river bank positions, flood plain edges, mud deposits, vegetation and erosion patterns) are then identified on the ortho‐view and mapped digitally. Image sequences of the river flow are recorded, allowing a surface velocity analysis to be obtained through Large Scale Particle Image Velocimetry (LSPIV). Finally, the mapped elements and the surface velocities are displayed together in a GIS‐like visualization. Through the presentation of a case study of a flood event at a culvert site, this paper demonstrates the capability of the technique to monitor characteristics of waterways over time. The method is inexpen‐sive (a conventional video or digital camera can be used), fast and requires minimum preparation. It can be applied in such important river‐related research areas as morphodynamic and sediment transport studies. It also fosters an improved understand‐ing of the coupling between the river and its banks, which is essential for river restoration and eco‐habitat studies. The present methodology is readily available for implementation in routine bridge inspections, fitted with an easy‐to‐use graphical interface. Copyright © 2009 John Wiley & Sons, Ltd.     

Does use of tropical beaches by tourists and island residents result in damage to fringing coral reefs? A case study in Moorea French Polynesia

Although coral reefs worldwide are subject to increasing global threats, humans also impact coral reefs directly through localized activities such as snorkeling, kayaking and fishing. We investigated five sites on the northern shore of Moorea, French Polynesia, and quantified the number of visitors on the beach and in shallow water. In field surveys, we measured total coral cover and colony sizes of two common genera, Porites and Acropora, a massive and branching morphology, respectively. One site, which hosted over an order of magnitude more people than the other four, had significantly less total coral cover and supported very little branching Acropora. In addition, size frequency distributions of both the branching and massive genera were skewed toward smaller colony sizes at the high use site. Our results demonstrated that the use of tropical beaches may result in less coral cover, with branching colonies rare and small.     

Isotherm Study of Phosphorus Uptake from Aqueous Solution Using Aluminum Oxide

Aluminum oxide, which could be an alternative filter media for phosphorus uptake from aqueous solution, was selected as an adsorbent for the isotherm study of phosphorus uptake from aqueous solution. Batch method was adopted to investigate the adsorption behavior of phosphorus onto aluminum oxide. The Langmuir, Freundlich, and Redlich–Peterson isotherms were used to analyze the experimental data by both the linear and nonlinear regression methods. The adsorption experiment was conducted at various temperatures, to choose the appropriate method and obtain the creditable adsorption parameters for phosphorus uptake studies. The results indicated that the nonlinear regression method might be a better way to compare the best‐fitting isotherm and obtain the parameters for the adsorption of phosphorus onto aluminum oxide. Both the Redlich–Peterson and the Freundlich isotherms have high coefficients of determination for the adsorption of phosphorus onto aluminum oxide at various temperatures. In addition, a new relationship between the Redlich–Peterson and the Freundlich isotherm parameters was presented.     

2D acoustic‐elastic coupled waveform inversion in the Laplace domain

Although waveform inversion has been intensively studied in an effort to properly delineate the Earth's structures since the early 1980s, most of the time‐ and frequency‐domain waveform inversion algorithms still have critical limitations in their applications to field data. This may be attributed to the highly non‐linear objective function and the unreliable low‐frequency components. To overcome the weaknesses of conventional waveform inversion algorithms, the acoustic Laplace‐domain waveform inversion has been proposed. The Laplace‐domain waveform inversion has been known to provide a long‐wavelength velocity model even for field data, which may be because it employs the zero‐frequency component of the damped wavefield and a well‐behaved logarithmic objective function. However, its applications have been confined to 2D acoustic media. We extend the Laplace‐domain waveform inversion algorithm to a 2D acoustic‐elastic coupled medium, which is encountered in marine exploration environments. In 2D acoustic‐elastic coupled media, the Laplace‐domain pressures behave differently from those of 2D acoustic media, although the overall features are similar to each other. The main differences are that the pressure wavefields for acoustic‐elastic coupled media show negative values even for simple geological structures unlike in acoustic media, when the Laplace damping constant is small and the water depth is shallow. The negative values may result from more complicated wave propagation in elastic media and at fluid‐solid interfaces. Our Laplace‐domain waveform inversion algorithm is also based on the finite‐element method and logarithmic wavefields. To compute gradient direction, we apply the back‐propagation technique. Under the assumption that density is fixed, P‐ and S‐wave velocity models are inverted from the pressure data. We applied our inversion algorithm to the SEG/EAGE salt model and the numerical results showed that the Laplace‐domain waveform inversion successfully recovers the long‐wavelength structures of the P‐ and S‐wave velocity models from the noise‐free data. The models inverted by the Laplace‐domain waveform inversion were able to be successfully used as initial models in the subsequent frequency‐domain waveform inversion, which is performed to describe the short‐wavelength structures of the true models.     

Effects of <Emphasis Type="Italic">Urechis unicinctus</Emphasis> juveniles on chemical characteristics of organically contaminated coastal sediment

Biological activities of marine benthos such as burrowing and feeding may change sediment characteristics. We conducted three experiments to examine the potential of using juveniles of a spoon worm Urechis unicinctus to improve the quality of organically contaminated coastal sediment. Sediment samples were collected from a site that was heavily contaminated with organic matter (Seonso) and two sites that were clean (Myo-do, Dolsan-do). Urechis juveniles, obtained by artificial fertilization and cultured in the laboratory, were introduced to the sediment (weight 3 kg, depth 10 cm) at a density of 500 individuals per aquarium (length 50 cm, width 35 cm, height 30 cm) (Experiment 1), or at densities ranging from 100 to 900 individuals per beaker (Experiment 2). To examine how sediment contamination can be modified by the effects of Urechis, 500 individuals (per aquarium) were exposed to the Seonso contaminated sediment that had been mixed with 0–100% clean sand (Experiment 3). Each experiment lasted two months and sediment samples were collected every 15 d to determine the several indexes of sediment quality, which included acid volatile sulfide (AVS), chemical oxygen demand (COD) and total ignition loss (TIL). In Experiment 1, the existence of Urechis did not result in significant changes in quality indexes in the sediments collected from Myo-do, Dolsan-do. However, AVS, COD and TIL of the Seonso sediment all decreased significantly after co-incubation with Urechis juveniles for 30 to 45 d. Experiment 2 showed that a density of at least 300 juveniles per beaker was necessary to significantly reduce all three quality indexes, and the magnitude of reduction was positively correlated with juvenile density. Experiment 3 revealed that Urechis juveniles were effective in reducing the AVS, COD and TIL of the Seonso sediment that had been mixed with 60%, 80%, and 80% of clean sand, respectively. The results of the present study therefore indicated that juveniles of this spoon worm have the potential to be used to improve the quality of organically contaminated sediment in coastal waters.     

Semi‐active tuned mass damper building systems: Design

Passive and semi‐active tuned mass damper (PTMD and SATMD) building systems are proposed to mitigate structural response due to seismic loads. The structure's upper portion self plays a role either as a tuned mass passive damper or a semi‐active resetable device is adopted as a control feature for the PTMD, creating a SATMD system. Two‐degree‐of‐freedom analytical studies are employed to design the prototype structural system, specify its element characteristics and effectiveness for seismic responses, including defining the resetable device dynamics. The optimal parameters are derived for the large mass ratio by numerical analysis. For the SATMD building system the stiffness of the resetable device design is combined with rubber bearing stiffness. From parametric studies, effective practical control schemes can be derived for the SATMD system. To verify the principal efficacy of the conceptual system, the controlled system response is compared with the response spectrum of the earthquake suites used. The control ability of the SATMD scheme is compared with that of an uncontrolled (No TMD) and an ideal PTMD building systems for multi‐level seismic intensity. Copyright © 2009 John Wiley & Sons, Ltd.     

Cloning,characterization,and expression analysis of the DEAD-box family genes,Fc-vasa and Fc-PL10a,in Chinese shrimp (Fenneropenaeus chinensis)

RNA helicases of the DEAD-box and related families are involved in various cellular processes including DNA replication,DNA repair,and RNA processing.However,the function of DEAD-box proteins in aquaculture species is poorly understood at molecular level.We obtained the full-length cDNA sequences of two genes encoding helicase-related proteins,Fc-vasa and Fc-PL10a,from the testes of Chinese shrimp,Fenneropenaeus chinensis.The two predicted amino acid sequences contain all the conserved motifs characterized ...     

Dynamic response of flexible rockfall barriers under different loading geometries

Flexible steel barriers are commonly constructed on steep hillsides to mitigate rockfall. The evaluation of the dynamic response of proprietary flexible barriers is conventionally performed using full-scale field tests by dropping a weight onto the barriers in accordance with the European test standard ETAG 27. The weight typically has a spherical or polyhedral shape and cannot reproduce more complex rockfall scenarios encountered in the field. A rigid slab may load a barrier over a larger area and its effect has not been investigated. In this study, a calibrated three-dimensional finite-element model was developed to study the performance of vertically and horizontally orientated rockfall barriers under concentrated areal impact loads. A new bilinear force-displacement model was incorporated into the model to simulate the behavior of the energy-dissipating devices on the barriers. The effect of different weight geometries was studied by considering impacts by a rigid single spherical boulder and a rigid slab. Results reveal that areal loading induced by a rigid slab increases the loading on the barrier foundation by up to 40 % in both horizontally and vertically positioned barriers when compared to a concentrated load scenario with a single boulder. This indicates that barriers tested under the current test standard does not give the worst-case scenario in terms of foundation loads, and barrier designers should take into account the possible effect of increased foundation loads by reinforcing the barrier posts and/or increasing their spacing.     

Microbial fuel cell operation using nitrate as terminal electron acceptor for simultaneous organic and nutrient removal

A double-chambered biocathode microbial fuel cell with carbon felt employed as electrodes was developed for wastewater treatment and bioelectricity generation simultaneously. The system was operated in fed-batch mode for over eight batches. The effect of circuit connections on organic and nitrate reduction was investigated. The maximum power density recorded was 21.97 mW/m² at current density of 88.57 mA/m². The Coulombic efficiency and internal resistance of the system were 5% and 100 Ω. Up to 89.9 ± 5.9% of chemical oxygen demand reduction efficiency achieved with an influent of 1123 ± 28 mg/L. There was no significant difference in the chemical oxygen demand reduction when system operated in either open or closed circuit. This study clearly showed that higher nitrate reduction efficiency obtained in closed circuit (74.7 ± 7.0%) due to bio-electrochemical denitrification compared to only 41.7% in the open circuit. The result also successfully demonstrated nitrate as terminal electron acceptor for the cathodic nitrate reduction.     

Statistical features of eddies approaching the Kuroshio east of Taiwan Island and Luzon Island

This study examined the statistical features of eddies approaching the Kuroshio east of Taiwan Island and Luzon Island. In total, 315 eddies (138 anticyclonic and 177 cyclonic eddies) were detected from 19.5 years of satellite altimeter sea-level data, with more than 95% of these eddies being generated in the ocean west of the Mariana Islands. Eddy trajectory statistics indicated that eddies frequently intrude into the Kuroshio regime at two latitude bands, namely 18°N–19°N and 22°N–23°N, with periods of 146 ± 62 and 165 ± 46 days, respectively. The interaction time is longer within the two active bands (33 ± 10 days at 18°N–19°N and 45 ± 17 days at 22°N–23°N) than at other latitudes. These two eddy-intrusion bands are associated with the northern and southern Subtropical Countercurrents (STCCs). These STCCs have a vertically reversed sign of the meridional potential vorticity gradient, thus providing a key energy source for eddy generation. In addition, when westward-propagating eddies approach the Ryukyu Islands, the southwestward recirculation flow east of the island chain as well as topographic effects cause some eddies to head southwestward to the east of Taiwan and intrude into the Kuroshio at 22°N–23°N, rather than to dissipate directly. Therefore, we suggest that the STCCs play a key role in inducing the eddies to frequently intrude into the Kuroshio at 18°N–19°N and 22°N–23°N. In addition, the Ryukyu Islands are responsible for concentrating the eddies within 22°N–23°N.